H3C 胖AP設定（非VLAN模式）

恢複出廠

<WA2620i-AGN>reset save

The saved configuration file will be erased. Are you sure? [Y/N]:y

Configuration file in flash is being cleared.

Please wait ...

....

 Configuration file is cleared.

<WA2620i-AGN>reboot

 Start to check configuration with next startup configuration file, please wait.

........DONE!

 This command will reboot the device. Current configuration will be lost, save c

urrent configuration? [Y/N]:n

 This command will reboot the device. Continue? [Y/N]:y

#Nov 24 03:03:52:580 2014 WA2620i-AGN DEVM/1/REBOOT:

 Reboot device by command.

配置交換機名稱

<WA2620i-AGN>sys

System View: return to User View with Ctrl+Z.

[WA2620i-AGN]sysname IT-WA2620-3

配置管理位址

interface Vlan-interface1

ip address 192.168.0.10 255.255.255.0

配置管理者賬号及密碼，為該使用者開啟telnet、console、web服務

[IT-WA2620-3]local-user admin

[IT-WA2620-3-luser-admin]password cipher 12345678

[IT-WA2620-3-luser-admin]service-type telnet terminal

[IT-WA2620-3-luser-admin]service-type web

配置con接口與telnet

[IT-WA2620-3]user-interface con 0

[IT-WA2620-3-ui-console0]authentication-mode scheme

[IT-WA2620-3-ui-console0]quit

[IT-WA2620-3]user-interface vty 0 4

[IT-WA2620-3-ui-vty0-4]authentication-mode scheme

[IT-WA2620-3-ui-vty0-4]quit

配置SNMP

snmp-agent

snmp-agent community read public

snmp-agent sys-info version all

配置NTP

ntp-service unicast-server 210.72.145.44

ntp-service unicast-server 202.120.2.101

配置無線接口

interface WLAN-BSS 11

 port link-type hybrid

 port hybrid vlan 1 untagged

interface WLAN-BSS 12

配置模闆與SSID參數（AES-CCMP加密舉例）

[IT-WA2620-3]wlan service-template 11 crypto

[IT-WA2620-3-wlan-st-3]ssid YYE5G-H3C

[IT-WA2620-3-wlan-st-3]cipher-suite ccmp

[IT-WA2620-3-wlan-st-3]security-ie rsn

[IT-WA2620-3-wlan-st-3]service-template enable

[IT-WA2620-3]wlan service-template 12 crypto

[IT-WA2620-3-wlan-st-3]ssid YYE-H3C

[IT-WA2620-3]interface WLAN-BSS 11

[IT-WA2620-3-WLAN-BSS11]port-security port-mode psk 

[IT-WA2620-3-WLAN-BSS11]port-security tx-key-type 11key 

[IT-WA2620-3-WLAN-BSS11]port-security preshared-key pass-phrase simple 12345678

[IT-WA2620-3]interface WLAN-BSS 12

[IT-WA2620-3-WLAN-BSS12]port-security port-mode psk 

[IT-WA2620-3-WLAN-BSS12]port-security tx-key-type 11key 

[IT-WA2620-3-WLAN-BSS12]port-security preshared-key pass-phrase simple 12345678

配置模闆與SSID參數（AES加密，這種加密比較常用）

wlan service-template 11 crypto

 ssid YYE5G-H3C

 cipher-suite tkip

 security-ie rsn

wlan service-template 12 crypto

 ssid YYE-H3C

 port-security port-mode psk 

 port-security tx-key-type 11key 

 port-security preshared-key pass-phrase simple 12345678

配置開放SSID（舉例）

wlan service-template 1 clear

ssid H3C

配置射頻綁定SSID、模闆、信道

[IT-WA2620-3]interface WLAN-Radio1/0/1

[IT-WA2620-3-WLAN-Radio1/0/1]service-template 11 interface wlan-bss 11

[IT-WA2620-3-WLAN-Radio1/0/1]interface WLAN-Radio1/0/2

[IT-WA2620-3-WLAN-Radio1/0/1]service-template 12 interface wlan-bss 12

[IT-WA2620-3-WLAN-Radio1/0/1]channel 6

配置使用者之間不隔離

undo wlan-client-isolation enable

添加預設路由

ip route-static 0.0.0.0 0.0.0.0 192.168.0.1

清理預設模闆H3C

[IT-WA2620-3]interface WLAN-Radio1/0/2

[IT-WA2620-3-WLAN-Radio1/0/2]undo service-template 1

[IT-WA2620-3-WLAN-Radio1/0/2]quit

[IT-WA2620-3]undo wlan service-template 1

[IT-WA2620-3]undo interface WLAN-BSS32

[IT-WA2620-3]undo interface WLAN-BSS33

啟用模闆（放出SSID信号）

service-template enable

本文轉自yangye1985 51CTO部落格，原文連結：http://blog.51cto.com/yangye/1669997，如需轉載請自行聯系原作者