因為前面Hbase2叢集出現過一次故障，當時花了一個周末才修好，就去了解整理了一些hbase故障的，事故現場可以看前面寫的一篇：Hbase叢集挂掉的一次驚險經曆
一. HBCK一緻性
一緻性是指Region在meta中的meta表資訊、線上Regionserver的Region資訊和hdfs的Regioninfo的Region資訊的一緻。
二. HBCK2與hbck1
HBCK2是後繼hbck，該修複工具，随HBase的-1.x的（AKA hbck1）。使用HBCK2代替 hbck1對 hbase-2.x 叢集進行修複。hbck1不應針對 hbase-2.x 安裝運作。它可能會造成損害。雖然hbck1仍然捆綁在 hbase-2.x 中——以盡量減少意外——但它已被棄用，将在hbase-3.x 中删除。它的寫入工具 ( -fix) 已被删除。它可以報告 hbase-2.x 叢集的狀态，但它的評估将是不準确的，因為它不了解 hbase-2.x 的内部工作原理。
我這裡是hbase版本是
2.0.0-cdh6.0.1
，
hbase hbck -h
顯示的是：
-----------------------------------------------------------------------
NOTE: As of HBase version 2.0, the hbck tool is significantly changed.
In general, all Read-Only options are supported and can be be used
safely. Most -fix/ -repair options are NOT supported. Please see usage
below for details on which options are not supported.
-----------------------------------------------------------------------
hbase2.0*是不支援hbck的，很多隻讀指令還可以執行，修複指令完全不能執行，hbase2隻能自己去官網下載下傳，自己編譯修複工具，也不知道
hbase
團隊咋想滴，整合在shell指令中多好，還要使用者自己去編譯，随着版本更新，越來越多的公司将從1.x更新到2.x。
NOTE: Following options are NOT supported as of HBase version 2.0+.
UNSUPPORTED Metadata Repair options: (expert features, use with caution!)
-fix Try to fix region assignments. This is for backwards compatiblity
-fixAssignments Try to fix region assignments. Replaces the old -fix
-fixMeta Try to fix meta problems. This assumes HDFS region info is good.
-fixHdfsHoles Try to fix region holes in hdfs.
-fixHdfsOrphans Try to fix region dirs with no .regioninfo file in hdfs
-fixTableOrphans Try to fix table dirs with no .tableinfo file in hdfs (online mode only)
-fixHdfsOverlaps Try to fix region overlaps in hdfs.
-maxMerge <n> When fixing region overlaps, allow at most <n> regions to merge. (n=5 by default)
-sidelineBigOverlaps When fixing region overlaps, allow to sideline big overlaps
-maxOverlapsToSideline <n> When fixing region overlaps, allow at most <n> regions to sideline per group. (n=2 by default)
-fixSplitParents Try to force offline split parents to be online.
-removeParents Try to offline and sideline lingering parents and keep daughter regions.
-fixEmptyMetaCells Try to fix hbase:meta entries not referencing any region (empty REGIONINFO_QUALIFIER rows)
UNSUPPORTED Metadata Repair shortcuts
-repair Shortcut for -fixAssignments -fixMeta -fixHdfsHoles -fixHdfsOrphans -fixHdfsOverlaps -fixVersionFile -sidelineBigOverlaps -fixReferenceFiles-fixHFileLinks
-repairHoles Shortcut for -fixAssignments -fixMeta -fixHdfsHoles
在hbase2中，hbck的指令是不支援修複的，需要使用hbck2指令，後面會介紹。
三. Hbck 一緻性的檢查和修複指令
一緻性檢查指令
hbase hbck <-details> <表名>
一緻性修複
hbase hbck <-fixMeta> ,<-fixAssignments> <表名>
指令詳解
-fixMeta：Try to fix meta problems. This assumes HDFS region info is good.
主要以hdfs為準進行修複，hdfs存在則添加到meta中，不存在删除meta對應region。
-fixAssignments:Try to fix region assignments. Replaces the old -fix
不同情況，動作不一樣，包括下線、關閉和重新上線
四. Hbck異常定位和修複
region在meta、regionserver和hdfs三者都有哪些不一緻？怎麼修複？可以根據下面的異常清單進行異常定位和修複:
| 不一緻 | 異常資訊 | 修複 |
|---|---|---|
| 第一種情況 | Region Is Not In Hbase:Meta | |
| Region資訊在meta資料和hdfs都不存在，但是卻被部署到Regionserver。 | errors.reportError(ERROR_CODE.NOT_IN_META_HDFS, "Region " + descriptiveName + ", key=" + key + ", not on HDFS or in hbase:meta but " + "deployed on " + Joiner.on(", ").join(hbi.deployedOn)); | FixAssignments |
| Region在meta資料表不存在，也沒有被部署到Regionserver，但是資料在hdfs上。 | errors.reportError(ERROR_CODE.NOT_IN_META_OR_DEPLOYED, "Region " + descriptiveName + " on HDFS, but not listed in hbase:meta " + "or deployed on any Region server" | - FixMeta - FixAssignments |
| Region在meta資料表不存在，但是在Regionserver部署，資料在hdfs上。 | errors.reportError(ERROR_CODE.NOT_IN_META, "Region " + descriptiveName + " not in META, but deployed on " + Joiner.on(", ").join(hbi.deployedOn)); | 1.FixMeta 2.FixAssignments |
| 第二種情況 | Region Is In Hbase:Meta | |
| Region隻存在meta中，但在hdfs和rs上都不存在 | errors.reportError(ERROR_CODE.NOT_IN_HDFS_OR_DEPLOYED, "Region " + descriptiveName + " found in META, but not in HDFS " + "or deployed on any Region server.") | FixMeta |
| Region在meta表和Regionserver中存在，但是在hdfs不存在。 | errors.reportError(ERROR_CODE.NOT_IN_HDFS, "Region " + descriptiveName + " found in META, but not in HDFS, " + "and deployed on " + Joiner.on(", ").join(hbi.deployedOn)); | 1.FixAssignments 2.FixMeta |
| Region在meta表和hdfs中存在，且Region所在表沒有處于disable狀态，但是沒有部署。 | errors.reportError(ERROR_CODE.NOT_DEPLOYED, "Region " + descriptiveName + " not deployed on any Region server."); | |
| Region處于disabling或disabled | errors.reportError(ERROR_CODE.SHOULD_NOT_BE_DEPLOYED, "Region " + descriptiveName + " should not be deployed according " + "to META, but is deployed on " + Joiner.on(", ").join(hbi.deployedOn)); | |
| Region多配置設定 | errors.reportError(ERROR_CODE.MULTI_DEPLOYED, "Region " + descriptiveName + " is listed in hbase:meta on Region server " + hbi.metaEntry.RegionServer + " but is multiply assigned to Region servers " + Joiner.on(", ").join(hbi.deployedOn)); | |
| Region在meta表的Regionserver資訊與實際部署的Regionserver不一緻。 | errors.reportError(ERROR_CODE.SERVER_DOES_NOT_MATCH_META, "Region " + descriptiveName + " listed in hbase:meta on Region server " + hbi.metaEntry.RegionServer + " but found on Region server " + hbi.deployedOn.get(0)); | |
| 父region在meta和hdfs存在，且處于切分狀态，但子region的資訊在meta資訊缺失。 | errors.reportError(ERROR_CODE.LINGERING_SPLIT_PARENT, "Region " + descriptiveName + " is a split parent in META, in HDFS, " + "and not deployed on any region server. This could be transient, " + "consider to run the catalog janitor first!"); | fixSplitParents |
五. Hbck2指令
HBCK是HBase1.x中的指令，到了HBase2.x中，HBCK指令不适用，且它的寫功能（-fix）已删除，它雖然還可以報告HBase2.x叢集的狀态，但是由于它不了解HBase2.x叢集内部的工作原理，是以其評估将不準确。是以，如果你正在使用HBase2.x，那麼對HBCK2應該需要了解一些，即使你不經常用到。
1. 擷取HBCK2
HBCK2已經被剝離出HBase成為了一個單獨的項目，如果你想要使用這個工具，需要根據自己HBase的版本，編譯源碼。
其GitHub位址為：https://github.com/apache/hbase-operator-tools.git
在
pom
中将hbase版本換成自己實際的
hbase2.x
版本，項目根目錄下運作打包指令：
mvn clean install -DskipTests
打包完成後，是有多個jar包的，将自己需要的hbck2取出來
hbase-operator-tools/hbase-hbck2/target/hbase-hbck2-1.0.0-SNAPSHOT.jar
。
2. 使用Hback2
HBCK2其依賴項的最簡單方法是通過腳本啟動
$HBASE_HOME/bin/hbase
。該bin/hbase腳本本身就提到了hbck-hbck幫助輸出中列出了一個選項。預設情況下， running将運作bin/hbase hbck内置的hbck1工具。要運作HBCK2，您需要使用以下選項指向建構的
HBCK2 jar -j
：
${HBASE_HOME}/bin/hbase --config /etc/hbase-conf hbck -j ~/hbase-operator-tools/hbase-hbck2/target/hbase-hbck2-1.0.0-SNAPSHOT.jar
上面/etc/hbase-conf的位置是部署的配置所在的位置，上面沒有傳遞選項或參數的指令将轉儲出HBCK2幫助：
usage: HBCK2 [OPTIONS] COMMAND <ARGS>
Options:
-d,--debug run with debug output
-h,--help output this help message
-p,--hbase.zookeeper.property.clientPort <arg> port of hbase ensemble
-q,--hbase.zookeeper.quorum <arg> hbase ensemble
-s,--skip skip hbase version check
(PleaseHoldException)
-v,--version this hbck2 version
-z,--zookeeper.znode.parent <arg> parent znode of hbase
ensemble
Command:
addFsRegionsMissingInMeta <NAMESPACE|NAMESPACE:TABLENAME>...
Options:
-d,--force_disable aborts fix for table if disable fails.
To be used when regions missing from hbase:meta but directories
are present still in HDFS. Can happen if user has run _hbck1_
'OfflineMetaRepair' against an hbase-2.x cluster. Needs hbase:meta
to be online. For each table name passed as parameter, performs diff
between regions available in hbase:meta and region dirs on HDFS.
Then for dirs with no hbase:meta matches, it reads the 'regioninfo'
metadata file and re-creates given region in hbase:meta. Regions are
re-created in 'CLOSED' state in the hbase:meta table, but not in the
Masters' cache, and they are not assigned either. To get these
regions online, run the HBCK2 'assigns'command printed when this
command-run completes.
NOTE: If using hbase releases older than 2.3.0, a rolling restart of
HMasters is needed prior to executing the set of 'assigns' output.
An example adding missing regions for tables 'tbl_1' in the default
namespace, 'tbl_2' in namespace 'n1' and for all tables from
namespace 'n2':
$ HBCK2 addFsRegionsMissingInMeta default:tbl_1 n1:tbl_2 n2
Returns HBCK2 an 'assigns' command with all re-inserted regions.
SEE ALSO: reportMissingRegionsInMeta
SEE ALSO: fixMeta
assigns [OPTIONS] <ENCODED_REGIONNAME/INPUTFILES_FOR_REGIONNAMES>...
Options:
-o,--override override ownership by another procedure
-i,--inputFiles take one or more encoded region names
A 'raw' assign that can be used even during Master initialization (if
the -skip flag is specified). Skirts Coprocessors. Pass one or more
encoded region names. 1588230740 is the hard-coded name for the
hbase:meta region and de00010733901a05f5a2a3a382e27dd4 is an example of
what a user-space encoded region name looks like. For example:
$ HBCK2 assigns 1588230740 de00010733901a05f5a2a3a382e27dd4
Returns the pid(s) of the created AssignProcedure(s) or -1 if none.
If -i or --inputFiles is specified, pass one or more input file names.
Each file contains encoded region names, one per line. For example:
$ HBCK2 assigns -i fileName1 fileName2
bypass [OPTIONS] <PID>...
Options:
-o,--override override if procedure is running/stuck
-r,--recursive bypass parent and its children. SLOW! EXPENSIVE!
-w,--lockWait milliseconds to wait before giving up; default=1
Pass one (or more) procedure 'pid's to skip to procedure finish. Parent
of bypassed procedure will also be skipped to the finish. Entities will
be left in an inconsistent state and will require manual fixup. May
need Master restart to clear locks still held. Bypass fails if
procedure has children. Add 'recursive' if all you have is a parent pid
to finish parent and children. This is SLOW, and dangerous so use
selectively. Does not always work.
extraRegionsInMeta <NAMESPACE|NAMESPACE:TABLENAME>...
Options:
-f, --fix fix meta by removing all extra regions found.
Reports regions present on hbase:meta, but with no related
directories on the file system. Needs hbase:meta to be online.
For each table name passed as parameter, performs diff
between regions available in hbase:meta and region dirs on the given
file system. Extra regions would get deleted from Meta
if passed the --fix option.
NOTE: Before deciding on use the "--fix" option, it's worth check if
reported extra regions are overlapping with existing valid regions.
If so, then "extraRegionsInMeta --fix" is indeed the optimal solution.
Otherwise, "assigns" command is the simpler solution, as it recreates
regions dirs in the filesystem, if not existing.
An example triggering extra regions report for tables 'table_1'
and 'table_2', under default namespace:
$ HBCK2 extraRegionsInMeta default:table_1 default:table_2
An example triggering extra regions report for table 'table_1'
under default namespace, and for all tables from namespace 'ns1':
$ HBCK2 extraRegionsInMeta default:table_1 ns1
Returns list of extra regions for each table passed as parameter, or
for each table on namespaces specified as parameter.
filesystem [OPTIONS] [<TABLENAME>...]
Options:
-f, --fix sideline corrupt hfiles, bad links, and references.
Report on corrupt hfiles, references, broken links, and integrity.
Pass '--fix' to sideline corrupt files and links. '--fix' does NOT
fix integrity issues; i.e. 'holes' or 'orphan' regions. Pass one or
more tablenames to narrow checkup. Default checks all tables and
restores 'hbase.version' if missing. Interacts with the filesystem
only! Modified regions need to be reopened to pick-up changes.
fixMeta
Do a server-side fix of bad or inconsistent state in hbase:meta.
Available in hbase 2.2.1/2.1.6 or newer versions. Master UI has
matching, new 'HBCK Report' tab that dumps reports generated by
most recent run of _catalogjanitor_ and a new 'HBCK Chore'. It
is critical that hbase:meta first be made healthy before making
any other repairs. Fixes 'holes', 'overlaps', etc., creating
(empty) region directories in HDFS to match regions added to
hbase:meta. Command is NOT the same as the old _hbck1_ command
named similarily. Works against the reports generated by the last
catalog_janitor and hbck chore runs. If nothing to fix, run is a
noop. Otherwise, if 'HBCK Report' UI reports problems, a run of
fixMeta will clear up hbase:meta issues. See 'HBase HBCK' UI
for how to generate new report.
SEE ALSO: reportMissingRegionsInMeta
generateMissingTableDescriptorFile <TABLENAME>
Trying to fix an orphan table by generating a missing table descriptor
file. This command will have no effect if the table folder is missing
or if the .tableinfo is present (we don't override existing table
descriptors). This command will first check it the TableDescriptor is
cached in HBase Master in which case it will recover the .tableinfo
accordingly. If TableDescriptor is not cached in master then it will
create a default .tableinfo file with the following items:
- the table name
- the column family list determined based on the file system
- the default properties for both TableDescriptor and
ColumnFamilyDescriptors
If the .tableinfo file was generated using default parameters then
make sure you check the table / column family properties later (and
change them if needed).
This method does not change anything in HBase, only writes the new
.tableinfo file to the file system. Orphan tables can cause e.g.
ServerCrashProcedures to stuck, you might need to fix these still
after you generated the missing table info files.
replication [OPTIONS] [<TABLENAME>...]
Options:
-f, --fix fix any replication issues found.
Looks for undeleted replication queues and deletes them if passed the
'--fix' option. Pass a table name to check for replication barrier and
purge if '--fix'.
reportMissingRegionsInMeta <NAMESPACE|NAMESPACE:TABLENAME>...
To be used when regions missing from hbase:meta but directories
are present still in HDFS. Can happen if user has run _hbck1_
'OfflineMetaRepair' against an hbase-2.x cluster. This is a CHECK only
method, designed for reporting purposes and doesn't perform any
fixes, providing a view of which regions (if any) would get re-added
to hbase:meta, grouped by respective table/namespace. To effectively
re-add regions in meta, run addFsRegionsMissingInMeta.
This command needs hbase:meta to be online. For each namespace/table
passed as parameter, it performs a diff between regions available in
hbase:meta against existing regions dirs on HDFS. Region dirs with no
matches are printed grouped under its related table name. Tables with
no missing regions will show a 'no missing regions' message. If no
namespace or table is specified, it will verify all existing regions.
It accepts a combination of multiple namespace and tables. Table names
should include the namespace portion, even for tables in the default
namespace, otherwise it will assume as a namespace value.
An example triggering missing regions report for tables 'table_1'
and 'table_2', under default namespace:
$ HBCK2 reportMissingRegionsInMeta default:table_1 default:table_2
An example triggering missing regions report for table 'table_1'
under default namespace, and for all tables from namespace 'ns1':
$ HBCK2 reportMissingRegionsInMeta default:table_1 ns1
Returns list of missing regions for each table passed as parameter, or
for each table on namespaces specified as parameter.
setRegionState <ENCODED_REGIONNAME> <STATE>
Possible region states:
OFFLINE, OPENING, OPEN, CLOSING, CLOSED, SPLITTING, SPLIT,
FAILED_OPEN, FAILED_CLOSE, MERGING, MERGED, SPLITTING_NEW,
MERGING_NEW, ABNORMALLY_CLOSED
WARNING: This is a very risky option intended for use as last resort.
Example scenarios include unassigns/assigns that can't move forward
because region is in an inconsistent state in 'hbase:meta'. For
example, the 'unassigns' command can only proceed if passed a region
in one of the following states: SPLITTING|SPLIT|MERGING|OPEN|CLOSING
Before manually setting a region state with this command, please
certify that this region is not being handled by a running procedure,
such as 'assign' or 'split'. You can get a view of running procedures
in the hbase shell using the 'list_procedures' command. An example
setting region 'de00010733901a05f5a2a3a382e27dd4' to CLOSING:
$ HBCK2 setRegionState de00010733901a05f5a2a3a382e27dd4 CLOSING
Returns "0" if region state changed and "1" otherwise.
setTableState <TABLENAME> <STATE>
Possible table states: ENABLED, DISABLED, DISABLING, ENABLING
To read current table state, in the hbase shell run:
hbase> get 'hbase:meta', '<TABLENAME>', 'table:state'
A value of \x08\x00 == ENABLED, \x08\x01 == DISABLED, etc.
Can also run a 'describe "<TABLENAME>"' at the shell prompt.
An example making table name 'user' ENABLED:
$ HBCK2 setTableState users ENABLED
Returns whatever the previous table state was.
scheduleRecoveries <SERVERNAME>...
Schedule ServerCrashProcedure(SCP) for list of RegionServers. Format
server name as '<HOSTNAME>,<PORT>,<STARTCODE>' (See HBase UI/logs).
Example using RegionServer 'a.example.org,29100,1540348649479':
$ HBCK2 scheduleRecoveries a.example.org,29100,1540348649479
Returns the pid(s) of the created ServerCrashProcedure(s) or -1 if
no procedure created (see master logs for why not).
Command support added in hbase versions 2.0.3, 2.1.2, 2.2.0 or newer.
unassigns <ENCODED_REGIONNAME>...
Options:
-o,--override override ownership by another procedure
A 'raw' unassign that can be used even during Master initialization
(if the -skip flag is specified). Skirts Coprocessors. Pass one or
more encoded region names. 1588230740 is the hard-coded name for the
hbase:meta region and de00010733901a05f5a2a3a382e27dd4 is an example
of what a userspace encoded region name looks like. For example:
$ HBCK2 unassign 1588230740 de00010733901a05f5a2a3a382e27dd4
Returns the pid(s) of the created UnassignProcedure(s) or -1 if none.
SEE ALSO, org.apache.hbase.hbck1.OfflineMetaRepair, the offline
hbase:meta tool. See the HBCK2 README for how to use.
這樣就看到熟悉的指令：
assigns
,
bypass
extraRegionsInMeta
fixMeta
這些都是官方文檔的内容，寫的很清楚了，有時間可以慢慢看下。
https://github.com/apache/hbase-operator-tools/tree/master/hbase-hbck2
猜你喜歡
Hadoop3資料容錯技術（糾删碼）
Hadoop 資料遷移用法詳解
Flink實時計算topN熱榜
數倉模組化分層理論
一文搞懂Hive的資料存儲與壓縮
大資料元件重點學習這幾個
我的部落格連結：Hbase修複工具Hbck