minicom無法輸入問題

2012-02-03 19:06  31人閱讀  評論(0)  收藏  舉報 在使用minicom檢視log時候，今天發現無法回車進入到指令行模式輸入指令了，通過查找資料發現關鍵點就在序列槽的配置中有個Serial port setup-->Hardware Flow Contorl選項被改成了Yes，這樣就造成了鍵盤沒有用了，接受不了任何輸入。把他改成No就好了。具體修改操作如下：

sudo minicom -s

+-----[configuration]------+

| Filenames and paths |

| File transfer protocols |

| Serial port setup |

| Modem and dialing |

| Screen and keyboard |

| Save setup as dfl |

| Save setup as.. |

| Exit |

| Exit from Minicom |

+--------------------------+

進入Serial port setup界面

+-----------------------------------------------------------------------+

| A - Serial Device : /dev/ttyS1 |

| B - Lockfile Location : /var/lock |

| C - Callin Program : |

| D - Callout Program : |

| E - Bps/Par/Bits : 115200 8N1 |

| F - Hardware Flow Control : No |

| G - Software Flow Control : No |

| |

| Change which setting? |

+-----------------------------------------------------------------------+

此時F - Hardware Flow Contorl項為Yes，按下F鍵就修改為No了，即關閉硬體流控，回車回到上級菜單

+-----[configuration]------+

| Filenames and paths |

| File transfer protocols |

| Serial port setup |

| Modem and dialing |

| Screen and keyboard |

| Save setup as dfl |

| Save setup as.. |

| Exit |

| Exit from Minicom |

+--------------------------+

選擇| Save setup as dfl |，然後選擇 Exit from Minicom  重新開機minicom

這樣就可以輸入指令了。