We can see stainless steel products everywhere in daily life, such as stair handrails, fences, some hardware accessories, furniture, handicrafts, etc., there are stainless steel materials. Stainless steel because of corrosion resistance, wear resistance, environmental protection and other high-quality characteristics, is widely cut into products for people to use, next we come together to understand the characteristics of stainless steel bending processing technology!
Characteristics of stainless steel bending process:
1. Under the unit size, the thicker the plate, the greater the bending force required, and as the plate thickness increases, the margin of bending force should be greater when selecting bending equipment, and the stainless steel has a lower elongation due to its thermal conductivity than ordinary low-carbon steel, resulting in a large deformation force;
2. Under the unit size, the greater the tensile strength, the smaller the elongation, the greater the required bending force, the greater the bending angle, the greater the bending angle of stainless steel with the same plate thickness as carbon steel, which should be paid special attention to otherwise there will be fracturing cracks, affecting the strength of the workpiece;
3. In the case of the corresponding plate thickness and bending radius in the design drawing, according to experience, the unfolding size of a bending workpiece is added to the right angle edge and subtracted from the two plate thickness, which can fully meet the design accuracy requirements, and the calculation of the expansion amount according to the empirical formula can simplify the calculation process and greatly improve the production efficiency;
4. The greater the yield strength of the material, the greater the amount of elastic recovery, in order to obtain the angle of 90 degrees of bending parts, the smaller the angle of the required pressure knife should be designed, the austenitic stainless steel has a large elastic recovery deformation relative to carbon steel when bending, so the pressure knife angle is relatively small compared to carbon steel.
Stainless steel plate surface is beautiful and the possibility of use is diverse, good corrosion resistance, longer durable than ordinary steel, stainless steel plate corrosion resistance is good strength, so the possibility of thin plate use, high temperature oxidation resistance and high strength, so it can resist fire room temperature processing, that is, easy plastic processing, because there is no need for surface treatment, so simple, simple maintenance and clean, high finish welding performance is good. Shenzhen Meilianxing Hardware Products Co., Ltd. is a professional production of stainless steel, aluminum alloy, iron and other civilian furniture hardware and hotel furniture hardware enterprises, and has high-tech equipment and technical personnel specializing in production. The above-mentioned stainless steel bending processing technology is the company's main technology, the selection of high-quality stainless steel, mature cutting technology, with a variety of creative styles.