Some owners are worried that the bathroom is damp, and the polyurea sewing agent will be degummed, but they are entangled in the epoxy color sand is not yellow enough, and they can't make up their minds to do what to sew, in fact, as long as the cohesiveness of the sewing agent is strong enough + water resistance, and it is a normal construction, there is no problem with polyurea sewing in the bathroom!
Why is pure polyurea sewing more suitable for toilets?
1. Strong adhesion
In the standard, heat aging, and immersion environment, the adhesion test of polyurea seam meets the standard, and it does not affect the adhesion in the immersed environment, so it is no problem to use in the bathroom.
2. High water resistance
In the water resistance test, the polyurea seam did not fall off, and it can adapt to the wet environment of the bathroom.
3. High stain resistance
In the stain resistance test, polyurea seams can meet the level 1 stain resistance standard, and can be cleaned with simple water and cloth, making it easier to clean the bathroom. Strong anti-penetration, not easy to accumulate dirt in the crevices when sewage is washed.
4. Resistant to yellowing
Polyurea sewing does not yellowing for 20 years, if the bathroom wants to match light-colored sewing, it is more suitable to choose polyurea resistant to yellowing.
To prevent degumming, what should be paid attention to in polyurea construction?
1. Wait for the gap to dry thoroughly before making beautiful sewings
The humid environment is not conducive to the solidification of colloids and affects the bonding of the brick surface, so it is recommended to do beautiful seams about 7 days after laying the bricks, during which it is necessary to pay attention to prevent other decoration processes from wetting the joints with water.
2. Clean the seams thoroughly
If there is still a lot of dust left in the gaps, it will also affect the colloidal bonding tiles, if it is not easy to deal with ordinary joint cleaning tools, it is recommended to prepare a vacuum cleaner, the effect is better and labor-saving.
3. Do not wax into the crevices
The wax film is easy to isolate the tile from the colloidal bonding, pay attention to control the strength when waxing, and do not squeeze the sponge wax against the gap.
4. Glue should be full
The adhesive surface of the gel and the tile is not enough, it may be deglued, when gluing, the angle between the glue gun and the tile should not be too small, too small and easy to shallow,