laitimes

How to distinguish between good and bad calcium silicate plates

author:Rielfa partition panels

With the vigorous development of the construction industry, more and more new plates have come into being, among which the calcium silicate plate with many advantages is one. Today's sharing is the calcium silicate plate.

Calcium silicate plate is a new type of plate made of loose short fibers such as inorganic mineral fibers as reinforcing materials, with silicon and calcium materials as the main materials, and after a series of processes such as pulping and molding. It has the advantages of fireproof, waterproof and moisture-proof, sound absorption and sound insulation, corrosion resistance, stable performance and long service life.

How to distinguish between good and bad calcium silicate plates

As a new type of fireproof board, the fire rating of calcium silicate board can reach A1 level, what is the concept of A1 level? At a high temperature of 1000 degrees Celsius, it is guaranteed that it will not burn for three hours, and when a fire occurs, the plate will not only not burn, do not have an open flame, but also will not produce toxic fumes. Not only that, the waterproof and moisture-proof performance of calcium silicate board is also very good, used in the bathroom such a high humidity place, can also maintain the stability of performance, the plate will not expand and deform, nor will it moldy deterioration. However, if stored in the open air, it needs to be covered with a tarpaulin. Different buildings, for the size of different requirements, calcium silicate plate can be arbitrarily cut, spliced, can be suitable for a variety of sizes of use.

How to distinguish between good and bad calcium silicate plates

Specifications are usually 2.44 meters long, 1.22 meters wide, thickness in about 5-24mm, the thinner can be used as a ceiling, composite wall panel panels, thicker can be used as walls, floors, sound barriers, road sound insulation, furniture, ship compartments and air ducts. Installation is also very simple, with cement nails or self-tapping nails fixed to the wall or frame on the line, if you need to seal, you can apply structural glue or sealant, the seams on both sides of the wall, to stagger each other, can not fall on the same keel.

This information is provided by Rielfa, please pay attention to us for more information!

How to distinguish between good and bad calcium silicate plates

Read on