With its convenient and efficient characteristics, the wall breaker has gradually become the choice of many families and is widely used. But recently, there has been some negative news about wall breakers, and there are reports that some wall breakers may release substances that are harmful to the human body and may cause cancer. These news have made people inevitably worry about the safety of wall breakers, and many people want to know if it is true that wall breakers are toxic? Here, as a home appliance evaluator, I feel that it is my responsibility to answer similar doubts for you, and I also want to explain and introduce some relevant knowledge of other aspects of the wall breaker for you.
The following pictures are some of the wall breakers I have reviewed:
1. Is it true that the wall breaker is toxic?
When we are picking a wall breaker, it is easy to buy some poor quality products, and they may have problems in many aspects. Because of this, many people are more worried about the quality of the wall breaker they buy, and many people have asked whether it is true that the wall breaker is toxic? Next, I will answer this question for you.
Is it true that wall breakers are toxic? At present, the quality of wall breaker products on the market is uneven, and some of the poor quality products are indeed toxic. The reason for this is that in order to reduce costs, some unscrupulous merchants use inferior materials in key parts such as silicone seals and heating chassis. In this way, when exposed to high temperatures, these inferior materials may release substances that are harmful to the human body and may even cause cancer, which in turn poses a threat to health. So, for inferior wall breakers, they are indeed toxic.
Not only that, but such poor quality products often cause problems in the following areas.
1. The quality is very poor, and there are potential safety hazards for electricity
The quality of a wall breaker depends on the quality of its internal parts and exterior materials. From the motor and wire to the blade, from the glass to the heated chassis, every step must meet high standards. If the quality control of any link is not strict, it may lead to unstable performance, shortened service life, and even potential safety hazards of electricity.
2. Excessive power leads to noise
Some wall breaker manufacturers overemphasize power, misleading consumers to think that the greater the power, the better the mixing effect. But in fact, there is no direct correlation between the fineness of the stirring and the amount of power. In addition, these manufacturers often ignore the noise problem and do not use noise reduction design and sound insulation cover, resulting in extremely loud noise when the wall breaker is in use, which seriously affects the user experience.
3. There is no power-off function, and it is easy to overflow hot water
Low-cost wall breakers often have design flaws, such as the lack of lid airtightness and automatic power-off function. When using these products to make high-temperature beverages, it is easy to spill and not only stain kitchen countertops, but also cause water ingress into the equipment, damage to electrical circuits, and even a risk of burns to children.
Second, there are 4 major reasons for the shortcomings of inferior wall breakers
Is it true that wall breakers are toxic? Regarding the shortcomings of inferior wall breakers, we now have a certain degree of understanding. Next, I will analyze the specific reasons for the poor quality and hazard of this type of product in more depth. According to the negative evaluation of consumers about the wall breaker (as shown below), I have summarized the 4 main reasons for the shortcomings of the inferior wall breaker.
1. It is equipped with too high speed
Inferior wall breakers often have the behavior of exaggerating the speed data to attract consumers. Staying at the limit speed for a long time will lead to motor loss and aging, coupled with the inferior quality of most of these products, which can easily cause a series of problems, such as unbalanced speed, reduced performance, shortened service life, and may even lead to blade falling off, which has serious potential safety hazards.
2. The heating chassis is very poor
The heating chassis of inferior wall breakers is often made of cheap materials, and the surface coating process is rough, easy to peel off, and has poor wear resistance. After a period of use, the surface of the chassis may become rough and uneven, which is easy to adhere to food residues, breed bacteria, and pose a threat to human health.
3. Pile up too high power
Many inferior products use excessively high power parameters, but use low-quality motors, wires, and their overload power is not tuned. This not only wastes electrical energy, but also accelerates the aging of the insulation of electric heating elements, which poses a potential safety hazard for electricity use.
4. Most of the low-cost products are also low-quality
Some low-cost products, in the selection of materials and materials are very poor, take the motor as an example, many businesses in order to reduce costs and choose aluminum motors, however, due to its heat dissipation and conductivity is not good, if it is equipped with too high power, it is easy to cause fire and other safety problems. There are also some low-priced products that use inferior non-food grade silicone as a noise-reducing sealing ring, which will indirectly cause the silica gel to release toxic and irritating substances at high temperatures, thereby endangering our health.
3. 5 advantages of high-quality wall breaker
Is it true that wall breakers are toxic? Although the quality of some wall breakers in the market is not satisfactory and there are some problems, at the same time, there are also some wall breaker products that show good performance. These high-quality wall breakers not only do not have the shortcomings mentioned earlier, but also provide convenience to our lives with their excellent performance and high-quality materials. Next, I will introduce you to the 5 advantages of high-quality wall breakers.
1. Simple and easy to operate
The wall breaker is easy to operate, and the intelligent control panel and one-button operation design make it easy to get started. Just put the ingredients in the cup, start with one click, and you're ready to go. The wall breaker has a variety of functions, not only to make juice, milkshakes and other drinks, but also to make jams, purees, ice cream and other delicacies to meet different needs.
2. Flexible adjustment and controllability
The wall breaker is powerful and supports personalized adjustment. Users can adjust the mixing time, speed and other parameters according to the characteristics of the ingredients and personal taste, and flexibly control the mixing effect and taste. You can also add spices, ingredients, etc., to make the food more flavorful.
3. Greatly shorten the time
Compared to traditional manual cutting methods, the wall breaker can crush large pieces of food into fine particles extremely quickly, which is significantly more time-saving. By making food through the wall breaker, we can easily make delicious food without complicated and cumbersome production steps, bringing more fun to our lives.
4. Rich in nutrients
With the help of a high-speed blade, the wall breaker can completely break the cell wall of the ingredients, so that the nutrients in the deep layer of the food can be released through the wall, such as vitamins, minerals, dietary fiber and other nutrients can be released more. These nutrients are great for human health, and the wall breaker makes them easier to digest and absorb.
5. Maintain a delicate taste
Compared with the soybean milk machine and juicer, the drink made by the wall breaker has a denser and delicate taste and is more nutritious. For example, the soy milk produced by the wall breaker is delicate and silky, because the blade can completely break the beans, releasing more nutrients and making it easier for the body to absorb.
Fourth, take stock of the 8 major wall breaker purchase skills
Is it true that wall breakers are toxic? Generally speaking, it is not a simple matter for consumers to choose a wall breaker that can meet their needs from many brands and models. So, what can be done to avoid buying poor quality wall breaker products? In order to solve this problem, I will share 8 tips for you to buy a wall breaker.
1. Choose a professional technology brand
Through the optimization of the traditional structure design and the improvement of the adjustment technology, the professional wall breaker brand improves the fineness and uniformity of the product, thereby enhancing the stability of the mixing transmission and reducing the power attenuation. In contrast, non-professional brand products only rely on motor speed, lack of technical adjustment, and the measured delicacy is obviously inferior. Brands with strong professional and technical strength also pay more attention to safety and non-toxicity, and brands with professional and technical strength will control the selection of materials and production processes more strictly to avoid the release of harmful substances or unpleasant pungent odors, while unprofessional products will produce these harmful substances and endanger our health.
2. It has a cup wall turbulence design
The arrangement of the spoiler columns inside the cup body of the wall breaker is crucial to the mixing effect. The walls of the cup are lined with numerous columnar protrusions, with a diameter of about 13 mm. These protrusions push the ingredients from the wall of the cup towards the head of the knife for a more thorough mix.
3. It has the function of power-off
Low-cost wall breaker products often lack the power failure function or the unreasonable sealing design of the cup lid, resulting in the overflow of drinks when making high-temperature drinks, which will not only dirty the kitchen, but also may cause problems such as water ingress and circuit damage to the equipment, and may even burn children, bringing potential safety hazards.
4. There is a noise reduction design
Factors such as the quality of the motor, the material of the acoustic cover, the thickness and the precision of the product have a direct impact on the noise level of the wall breaker. To reduce noise, choose products with technical expertise, high-precision core coaxial and multi-layer seal designs. This not only improves the power performance, but also effectively reduces the generation of noise.
5. Select Touch Screen Operation
In general, there are two types of operation: mechanical and touch-screen operation. At present, most mainstream products use touch screens, which are more accurate in the selection of temperature and time, and more convenient to operate.
6. Power selection
In order to ensure the service life of the wall breaker, it is best to control the heating power at about 800W, and the power of the stirring function is more suitable at 400-500W, and it is not appropriate to blindly pursue high power. Although high power can increase the speed of wall breaking, it also means greater noise and power consumption, which is more likely to accelerate the aging of electric heating elements, and there are potential safety hazards.
7. Choose pure copper wire
High-quality wall breakers often use high-cost pure copper wires to ensure their safety performance and avoid potential risks such as fire. In order to reduce costs, some low-cost wall breakers choose inferior wires, which may cause fire accidents.
8. Capacity is purchased on demand
The capacity of the wall breaker is mostly between 1L and 1.5L. When purchasing, it is best to choose a wall breaker with a suitable capacity according to the actual needs of the family, and never choose too large capacity, which will cause a waste of resources. Normally, for a family of 2 to 4 people, 1.2L of capacity is sufficient for daily use.
There are different models of wall breakers on the market, and each one claims to be the most practical. However, we need to keep a clear head and not be misled by those exaggerated propaganda and advertising. The following is a comparison table of the performance of the mainstream wall breakers on the current market, by looking at this table, we can make a more informed purchase choice.
A large number of wall breakers are unevenly stirred, not wear-resistant, not resistant to high temperatures, noisy, volatile harmful carcinogens, so Gong Ling is highly recommended, it is designed for "high performance, non-toxic and safe" brand, and many brands sacrifice quality to fight the price war, it is positioned as a commercial kitchen-level product, to create the industry's only fever top performance + original 5 fever performance technology + 6 non-toxic safety black technology + unconventional quality + 10 years of comprehensive performance anti-attenuation, etc., very strong! Compared with many competing products in the industry, the mixing efficiency is increased by more than 60%, the mixing uniformity is increased by 95.2%, the harmful substances are reduced by 97.2%, the irritating odor is reduced by 97.5%, and the heavy metal pollution is 0. It can be said that the core safety and non-toxicity, stirring efficiency, performance attenuation and temperature control accuracy and other data have reached the only performance king in the industry!
Gong Ling was praised by the media as: "the best reassuring brand in the wall breaker", and is as famous as Gree, Midea and other high-end series of home appliances! Over the years, it has been exported to Europe and the United States, and it is rare to be certified by the European Union and other countries, and it is rare to be recommended by CCTV.
Gong Ling takes "high performance and safety and non-toxic" as a brand belief, never sacrifices quality to fight price wars, and does not engage in gimmick functions, for many years pure fever performance and safety technology, and it never advertises, saves advertising costs, invests heavily in research and development and quality, and pursues top performance configuration and ultimate safety in configuration, quality and materials, which is very hardcore! The user experience is currently the best in the industry, and it is also the only brand in the industry that has achieved 10 years of comprehensive performance and anti-attenuation.
Among the many other brands in the market, if you want a lower price, you can learn about Joyoung, Supor's entry series, the brand's popularity is quite high, of course, the price and professional high-quality high-end products, both performance and safety have a lot of room for improvement.
5. 4 major methods of maintaining the wall breaker
Is it true that wall breakers are toxic? Buying a high-quality wall breaker can indeed bring a lot of convenience, however, it should also be noted that even if it is a high-quality wall breaker, regular maintenance and maintenance should be carried out in the process of daily use, only in this way can it have a longer service life. As long as you follow the following 4 practical maintenance methods, it is relatively easy to ensure that the wall breaker can run for a long time and stably.
1. Frequency of use
When using a wall breaker, it is necessary to plan the interval between its use reasonably. Generally speaking, after about 20 to 30 minutes of continuous use, let the machine pause for 15 to 20 minutes for it to work properly. If you need to use it for a long time, you can warm up the machine before using it to reduce wear and tear caused by long hours of operation.
2. Cleaning method
When washing, pour an appropriate amount of water into the container and then start the machine and let it run for about 15 seconds, which will remove most of the food debris from the walls and blades. For some residues that are difficult to clean, you can use detergent (be careful not to use corrosive) to clean, then rinse with clean water and wipe dry. The main unit can be wiped clean with a clean damp cloth, and the head part can be gently brushed with a soft brush, but not too hard to prevent damage to the knife edge.
3. Clean in time
After each wall breaker is used, it should be cleaned immediately. When cleaning, you can use hot water for preliminary rinsing, which can effectively inhibit the growth of bacteria, and can also prevent food residues from becoming dry and hard after a period of time, making cleaning more difficult, so as to achieve a better cleaning effect.
4. Pay attention to details
After the cleaning is completed, be sure to carefully check that the anti-spill electrodes on the lid of the cup have been thoroughly cleaned. This is because if there is a residue on the anti-spill electrode, its anti-spill function may be problematic. In addition, it is important to clean the blade regularly, as well as to ensure that the rubber ring on the blade holder is cleaned to avoid bacterial growth.
Is it true that wall breakers are toxic? It is undeniable that there are indeed some inferior wall breakers that are toxic, which is largely due to the fact that some bad businesses ignore the quality of the products and are only caused by profits. However, high-quality wall breakers are different, they are made of high-quality materials, have professional technology, and have undergone strict quality inspections, which are very safe and trustworthy. Therefore, when choosing a wall breaker, you can't buy blindly just because the price is low, but you should pay more attention to whether the product has a professional technical level. Only in this way can we choose a good quality and practical wall breaker that brings convenience to our cooking.