Rearview mirror reversing method

The rearview mirror reversing method is because the rearview mirror is used throughout the reversing process, which plays a decisive role in whether the car can be smoothly reversed into the parking space.

Step 1: Drive the car through the parking space and judge whether the parking space can park your car through your eyesight. If we are sure that we can park in it, we will drive our car to a position roughly equal to the car in front of the parking space, and the distance between the two cars is about 1 meter. Then adjust the angle of the right mirror ourselves, as low as possible until we can see the right wheel. Then we turned the steering wheel to the right and started reversing.

1. In order to protect the power steering pump, the "full direction" referred to here is to hit the direction to the head first, and then retract a little.

2. The "left" and "right" directions are based on the driver's perspective.

3. Rearview mirror adjustment should not be ignored. However, if you are familiar with your own car and can accurately grasp the distance between the vehicle and the shoulder of the road, you can ignore this step.

4. The above is about 1 meter between the two cars horizontally. If the two cars are too close to each other, such as 30cm, it is necessary to fill the direction to the right later, for example, the rearview mirror of the car and the B-pillar of the side front car are in a line and then full to the right when the direction is full, so that the reversing technology is learned, at this time, the rear wheel of the car is already near the tail end of the side front car. 30 cm is a very close distance, and when you look at it from the driver's seat, you will feel that the two cars are about to rub against each other, but in fact they are not, which requires more practice to strengthen your perception of distance (look at the car, get out of the car and take a look, practice a lot).

Step 2: When you start to reverse and move, the driver's eyes should immediately move from the right rearview mirror to the left rearview mirror, and pay attention to the oncoming vehicles and obstacles on the left. Slowly reverse in full direction until the left side mirror can fully see the front of the car behind you (this is a very important experience skill, usually the angle of the body relative to the garage is ideal, or look at the right side mirror, when your right side of the car can completely block the parked car behind you, you have to return to the right direction), then return to the right direction and continue to reverse. Look in the right mirror and look at the right side through the right mirror.

Step 3: Through the right side mirror, observe the distance between the right rear wheel and the shoulder, and then move the car as close to the shoulder as possible, but keep enough distance for the body to swing straight.

It is necessary to carefully observe the exterior mirror on the right side of the car and the rearview mirror in the car, and grasp the distance between the rear of the car, the rear car and the wall. It's safe, just slow down. The mirror surface of the mirror is curved, which allows you to have a wider field of vision, but at the same time distorts the distance between objects. So when I looked at the rear of the car from the mirror, I thought it was about to hit the wall, but in fact, there was still a long way to go. In addition, many cars now have a reversing sensor, and you can also use it to get into position as safely as possible. However, there is nothing wrong with practice, and it is especially important to have a good sense of distance when parking on the side.

Step 4: When the body is almost in the parking space, the car mainly judges the distance from the rear car by turning the head or reversing the assist system. Of course, if the parking space is cramped, find a helper to observe and give tips from outside the car.

Step 5: Go back to the right and adjust the distance between the front and rear, and it is the rearview mirror reversing method, because the car rearview mirror has to be used throughout the reversing process, which plays a decisive role in whether the car can be successfully reversed into the parking space.

Step 1: Drive the car through the parking space and judge whether the parking space can park your car through your eyesight. If we are sure that we can park in it, we will drive our car to a position roughly equal to the car in front of the parking space, and the distance between the two cars is about 1 meter. Then adjust the angle of the right mirror ourselves, as low as possible until we can see the right wheel. Then we turned the steering wheel to the right and started reversing.

1. In order to protect the power steering pump, the "full direction" referred to here is to hit the direction to the head first, and then retract a little.

2. The "left" and "right" directions are based on the driver's perspective.

3. Rearview mirror adjustment should not be ignored. However, if you are familiar with your own car and can accurately grasp the distance between the vehicle and the shoulder of the road, you can ignore this step.

4. The above is about 1 meter between the two cars horizontally. If the two cars are too close to each other, such as 30cm, it is necessary to fill the direction to the right later, for example, the rearview mirror of the car and the B-pillar of the side front car are in a line and then full to the right when the direction is full, so that the reversing technology is learned, at this time, the rear wheel of the car is already near the tail end of the side front car. 30 cm is a very close distance, and when you look at it from the driver's seat, you will feel that the two cars are about to rub against each other, but in fact they are not, which requires more practice to strengthen your perception of distance (look at the car, get out of the car and take a look, practice a lot).

Step 2: When you start to reverse and move, the driver's eyes should immediately move from the right rearview mirror to the left rearview mirror, and pay attention to the oncoming vehicles and obstacles on the left. Slowly reverse in full direction until the left side mirror can fully see the front of the car behind you (this is a very important experience skill, usually the angle of the body relative to the garage is ideal, or look at the right side mirror, when your right side of the car can completely block the parked car behind you, you have to return to the right direction), then return to the right direction and continue to reverse. Look in the right mirror and look at the right side through the right mirror.

Step 3: Through the right side mirror, observe the distance between the right rear wheel and the shoulder, and then move the car as close to the shoulder as possible, but keep enough distance for the body to swing straight.

It is necessary to carefully observe the exterior mirror on the right side of the car and the rearview mirror in the car, and grasp the distance between the rear of the car, the rear car and the wall. It's safe, just slow down. The mirror surface of the mirror is curved, which allows you to have a wider field of vision, but at the same time distorts the distance between objects. So when I looked at the rear of the car from the mirror, I thought it was about to hit the wall, but in fact, there was still a long way to go. In addition, many cars now have a reversing sensor, and you can also use it to get into position as safely as possible. However, there is nothing wrong with practice, and it is especially important to have a good sense of distance when parking on the side.

Step 4: When the body is almost in the parking space, the car mainly judges the distance from the rear car by turning the head or reversing the assist system. Of course, if the parking space is cramped, find a helper to observe and give tips from outside the car.

Step 5: Go back to the right and adjust the distance between the front and rear, and it is the rearview mirror reversing method, because the car rearview mirror has to be used throughout the reversing process, which plays a decisive role in whether the car can be successfully reversed into the parking space.

Step 1: Drive the car through the parking space and judge whether the parking space can park your car through your eyesight. If we are sure that we can park in it, we will drive our car to a position roughly equal to the car in front of the parking space, and the distance between the two cars is about 1 meter. Then adjust the angle of the right mirror ourselves, as low as possible until we can see the right wheel. Then we turned the steering wheel to the right and started reversing.

1. In order to protect the power steering pump, the "full direction" referred to here is to hit the direction to the head first, and then retract a little.

2. The "left" and "right" directions are based on the driver's perspective.

3. Rearview mirror adjustment should not be ignored. However, if you are familiar with your own car and can accurately grasp the distance between the vehicle and the shoulder of the road, you can ignore this step.

4. The above is about 1 meter between the two cars horizontally. If the two cars are too close to each other, such as 30cm, it is necessary to fill the direction to the right later, for example, the rearview mirror of the car and the B-pillar of the side front car are in a line and then full to the right when the direction is full, so that the reversing technology is learned, at this time, the rear wheel of the car is already near the tail end of the side front car. 30 cm is a very close distance, and when you look at it from the driver's seat, you will feel that the two cars are about to rub against each other, but in fact they are not, which requires more practice to strengthen your perception of distance (look at the car, get out of the car and take a look, practice a lot).

Step 2: When you start to reverse and move, the driver's eyes should immediately move from the right rearview mirror to the left rearview mirror, and pay attention to the oncoming vehicles and obstacles on the left. Slowly reverse in full direction until the left side mirror can fully see the front of the car behind you (this is a very important experience skill, usually the angle of the body relative to the garage is ideal, or look at the right side mirror, when your right side of the car can completely block the parked car behind you, you have to return to the right direction), then return to the right direction and continue to reverse. Look in the right mirror and look at the right side through the right mirror.

Step 3: Through the right side mirror, observe the distance between the right rear wheel and the shoulder, and then move the car as close to the shoulder as possible, but keep enough distance for the body to swing straight.

It is necessary to carefully observe the exterior mirror on the right side of the car and the rearview mirror in the car, and grasp the distance between the rear of the car, the rear car and the wall. It's safe, just slow down. The mirror surface of the mirror is curved, which allows you to have a wider field of vision, but at the same time distorts the distance between objects. So when I looked at the rear of the car from the mirror, I thought it was about to hit the wall, but in fact, there was still a long way to go. In addition, many cars now have a reversing sensor, and you can also use it to get into position as safely as possible. However, there is nothing wrong with practice, and it is especially important to have a good sense of distance when parking on the side.

Step 4: When the body is almost in the parking space, the car mainly judges the distance from the rear car by turning the head or reversing the assist system. Of course, if the parking space is cramped, find a helper to observe and give tips from outside the car.

Step 5: Go back to the right direction, adjust the distance between the front and back, and you're done