centos6.x svn搭建

<code>yum </code><code>install</code> <code>subversion -y</code>

<code>[root@centos01 ~]</code><code># mkdir -p /application/svndata #数据存储目录</code>

<code>[root@centos01 ~]</code><code># mkdir -p /application/svnpasswd #用户密码目录</code>

<code>[root@centos01 ~]</code><code># svnserve -d -r /application/svndata/</code>

<code>[root@centos01 ~]</code><code># ps -ef |grep svn</code>

<code>root 6041 1 0 08:39 ? 00:00:00 svnserve -d -r </code><code>/application/svndata/</code>

<code>[root@centos01 ~]</code><code># netstat -lntup |grep 3690</code>

<code>tcp 0 0 0.0.0.0:3690 0.0.0.0:* LISTEN 6041</code><code>/svnserve</code>

<code>[root@centos01 ~]</code><code># </code>

<code>#创建版本库</code>

<code>[root@centos01 ~]</code><code># svnadmin create /application/svndata/daima</code>

<code>[root@centos01 ~]</code><code># tee /application/svndata/daima/</code>

<code>tee</code><code>: </code><code>/application/svndata/daima/</code><code>: Is a directory</code>

<code>[root@centos01 ~]</code><code># tree /application/svndata/daima/</code>

<code>/application/svndata/daima/</code>

<code>│ ├── authz</code>

<code>│ ├── </code><code>passwd</code>

<code>│ └── svnserve.conf</code>

<code>│ ├── current</code>

<code>│ ├── </code><code>format</code>

<code>│ ├── min-unpacked-rev</code>

<code>│ ├── rep-cache.db</code>

<code>│ ├── revprops</code>

<code>│ ├── transactions</code>

<code>│ ├── txn-current</code>

<code>│ ├── txn-current-lock</code>

<code>│ ├── txn-protorevs</code>

<code>│ └── write-lock</code>

<code>├── </code><code>format</code>

<code>├── hooks</code>

<code>│ ├── post-commit.tmpl</code>

<code>│ ├── post-revprop-change.tmpl</code>

<code>│ ├── post-unlock.tmpl</code>

<code>│ ├── pre-commit.tmpl</code>

<code>│ ├── pre-revprop-change.tmpl</code>

<code>│ ├── pre-unlock.tmpl</code>

<code>│ └── start-commit.tmpl</code>

<code>├── locks</code>

<code>└── README.txt</code>

<code>10 directories, 28 files</code>

<code>#修改配置文件</code>

<code>[root@centos01 ~]</code><code># cd /application/svndata/daima/conf/</code>

<code>[root@centos01 conf]</code><code># ls</code>

<code>authz </code><code>passwd</code> <code>svnserve.conf</code>

<code>[root@centos01 conf]</code><code># cat svnserve.conf</code>

<code>### This file controls the configuration of the svnserve daemon, if you</code>

<code>### use it to allow access to this repository. (If you only allow</code>

<code>### access through http: and/or file: URLs, then this file is</code>

<code>### irrelevant.)</code>

<code>### Visit http://subversion.tigris.org/ for more information.</code>

<code>[general]</code>

<code>### These options control access to the repository for unauthenticated</code>

<code>### and authenticated users. Valid values are "write", "read",</code>

<code>### and "none". The sample settings below are the defaults.</code>

<code>anon-access = none</code>

<code>auth-access = write</code>

<code>### The password-db option controls the location of the password</code>

<code>### database file. Unless you specify a path starting with a /,</code>

<code>### the file's location is relative to the directory containing</code>

<code>### this configuration file.</code>

<code>### If SASL is enabled (see below), this file will NOT be used.</code>

<code>### Uncomment the line below to use the default password file.</code>

<code>password-db = </code><code>/application/svnpasswd/passwd</code>

<code>### The authz-db option controls the location of the authorization</code>

<code>### rules for path-based access control. Unless you specify a path</code>

<code>### starting with a /, the file's location is relative to the the</code>

<code>### directory containing this file. If you don't specify an</code>

<code>### authz-db, no path-based access control is done.</code>

<code>### Uncomment the line below to use the default authorization file.</code>

<code>authz-db = </code><code>/application/svnpasswd/authz</code>

<code>### This option specifies the authentication realm of the repository.</code>

<code>### If two repositories have the same authentication realm, they should</code>

<code>### have the same password database, and vice versa. The default realm</code>

<code>### is repository's uuid.</code>

<code># realm = My First Repository</code>

<code>### This option specifies whether you want to use the Cyrus SASL</code>

<code>### library for authentication. Default is false.</code>

<code>### This section will be ignored if svnserve is not built with Cyrus</code>

<code>### SASL support; to check, run 'svnserve --version' and look for a line</code>

<code>### reading 'Cyrus SASL authentication is available.'</code>

<code>### These options specify the desired strength of the security layer</code>

<code>### that you want SASL to provide. 0 means no encryption, 1 means</code>

<code>### integrity-checking only, values larger than 1 are correlated</code>

<code>### to the effective key length for encryption (e.g. 128 means 128-bit</code>

<code>### encryption). The values below are the defaults.</code>

<code># min-encryption = 0</code>

<code># max-encryption = 256</code>

<code>[root@centos01 conf]</code><code># diff svnserve.conf svnserve.conf.bak </code>

<code>> </code><code># anon-access = read</code>

<code>> </code><code># auth-access = write</code>

<code>< password-db = </code><code>/application/svnpasswd/passwd</code>

<code>> </code><code># password-db = passwd</code>

<code>< authz-db = </code><code>/application/svnpasswd/authz</code>

<code>> </code><code># authz-db = authz</code>

<code>#拷贝认证文件模板</code>

<code>[root@centos01 conf]</code><code># pwd</code>

<code>/application/svndata/daima/conf</code>

<code>authz </code><code>passwd</code> <code>svnserve.conf svnserve.conf.bak</code>

<code>[root@centos01 conf]</code><code># cp passwd authz /application/svnpasswd/</code>

<code>[root@centos01 conf]</code><code># </code>

<code>[root@centos01 conf]</code><code># cd /application/svnpasswd/</code>

<code>[root@centos01 svnpasswd]</code><code># ll</code>

<code>total 8</code>

<code>-rw-r--r--. 1 root root 1080 Dec 29 09:00 authz</code>

<code>-rw-r--r--. 1 root root 309 Dec 29 09:00 </code><code>passwd</code>

<code>[root@centos01 svnpasswd]</code><code># chmod 700 *</code>

<code>-rwx------. 1 root root 1080 Dec 29 09:00 authz</code>

<code>-rwx------. 1 root root 309 Dec 29 09:00 </code><code>passwd</code>

<code>[root@centos01 svnpasswd]</code><code># </code>

<code>#创建用户并授权访问指定项目版本库</code>

<code>[root@centos01 svnpasswd]</code><code># vim passwd </code>

<code>[root@centos01 svnpasswd]</code><code># cat passwd </code>

<code>### This file is an example password file for svnserve.</code>

<code>### Its format is similar to that of svnserve.conf. As shown in the</code>

<code>### example below it contains one section labelled [users].</code>

<code>### The name and password for each user follow, one account per line.</code>

<code>[</code><code>users</code><code>]</code>

<code># harry = harryssecret</code>

<code># sally = sallyssecret</code>

<code>admin = admin</code>

<code>yancong = yancong</code>

<code>[root@centos01 svnpasswd]</code><code># cat authz </code>

<code>### This file is an example authorization file for svnserve.</code>

<code>### Its format is identical to that of mod_authz_svn authorization</code>

<code>### files.</code>

<code>### As shown below each section defines authorizations for the path and</code>

<code>### (optional) repository specified by the section name.</code>

<code>### The authorizations follow. An authorization line can refer to:</code>

<code>### - a single user,</code>

<code>### - a group of users defined in a special [groups] section,</code>

<code>### - an alias defined in a special [aliases] section,</code>

<code>### - all authenticated users, using the '$authenticated' token,</code>

<code>### - only anonymous users, using the '$anonymous' token,</code>

<code>### - anyone, using the '*' wildcard.</code>

<code>### A match can be inverted by prefixing the rule with '~'. Rules can</code>

<code>### grant read ('r') access, read-write ('rw') access, or no access</code>

<code>[aliases]</code>

<code># joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average</code>

<code>[</code><code>groups</code><code>]</code>

<code># harry_and_sally = harry,sally</code>

<code># harry_sally_and_joe = harry,sally,&joe</code>

<code># harry = rw</code>

<code># [repository:/baz/fuz]</code>

<code># @harry_and_sally = rw</code>

<code>[daima:/]</code>

<code>admin = rw</code>

<code>yancong = r</code>

<code>[root@centos01 svnpasswd]</code><code># ps -ef|grep svn</code>

<code>[root@centos01 svnpasswd]</code><code># kill 6041</code>

<code>[root@centos01 svnpasswd]</code><code># ls</code>

<code>authz </code><code>passwd</code>

<code>[root@centos01 svnpasswd]</code><code># svnserve -d -r /application/svndata/</code>

<code>root 6100 1 0 09:27 ? 00:00:00 svnserve -d -r </code><code>/application/svndata/</code>

<code>[root@centos01 svnpasswd]</code><code>#</code>

本文转自 yanconggod 51CTO博客，原文链接:http://blog.51cto.com/yanconggod/1892239

centos6.x svn搭建

继续阅读

CentOS 6.0下使用光盘做为yum源

CentOS添加多个yum源(转）

centos7创建自己的yum源

centos下SVN搭建与使用

centos 7.2搭建yum的注意事项

CentOS6.x使用163和epel yum源的选择

阿里云centos7.2 搭建 laravel 框架走过的坑

centos7搭建owncloud私有云

centos7之Java开发环境构建CensOS7环境

使用C++实现的单向循环链表

使用C++实现单向链表

Centos 7 搭建.net web项目

阿里云服务器 Centos 7 如何搭建Java Web开发环境？一.安装 JDK二、安装MySqlServer三、安装Tomcat

阿里云服务器 Centos 7 如何搭建 Java Web 开发环境？一.安装 JDK二、安装MySqlServer三、安装Tomcat

基于阿里云Centos 搭建Discuz论坛

centos7下用docker来搭建discuz论坛