Linux网卡异常：解决Device eth0 does not seem to be present

Linux解决Device eth0 does not seem to be present

在VMware里克隆出来的Linux。。

ifconfig...没有看到eth0.。然后重启网卡又报下面错误。

一、故障现象：

service network restart

Shutting down loopback insterface:   [  OK  ]

Bringing up loopback insterface:     [  OK  ]

Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization.               [FAILED]

二、解决办法：

1).打开70-persistent-net.rules,记录下eth1网卡的mac地址：

# vi /etc/udev/rules.d/70-persistent-net.rules

...

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:b9:42:5d", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x1022:0x2000 (pcnet32)

SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:50:56:b9:22:fa", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

记录下，eth1网卡的mac地址00:50:56:b9:22:fa

2).打开ifcfg-eth0,更改DEVICE名和MAC地址：

# vi /etc/sysconfig/network-scripts/ifcfg-eth0

将 DEVICE="eth0"  改成  DEVICE="eth1"  ,

将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址  HWADDR="00:0c:29:50:bd:17"

3).重启网络

# service network restart

或者

# /etc/init.d/network restart

---end---