linux-进程间通信
- 1 学习目标
- 2 进程间通信相关概念
-
- 2.1 什么是进程间通信
- 2.2 进程间通信的方式
- 3 管道-pipe
-
- 3.1管道的概念
- 3.2管道的原理
- 3.3管道的局限性
- 3.4创建管道-pipe函数
- 3.5父子进程使用管道通信
- 3.6 管道练习
- 3.7 管道的读写行为
- 3.8 如何设置管道为非阻塞
- 3.9 如何查看管道缓冲区大小
- 4 FIFO
-
- 4.1 FIFO介绍
- 4.2 创建管道
- 4.3 使用FIFO完成两个进程通信
- 5 内存映射区
-
- 5.1 存储映射区介绍
- 5.2 mmap函数
- 5.3 munmap函数
- 5.4 mmap注意事项
- 5.5 有关mmap函数的使用总结
- 5.6 mmap函数相关思考题
- 5.7 mmap应用练习
1 学习目标
- 熟练使用pipe进行父子进程间通信
- 熟练使用pipe进行兄弟进程间通信
- 熟练使用fifo进行无血缘关系的进程间通信
- 使用mmap进行有血缘关系的进程间通信
- 使用mmap进行无血缘关系的进程间通信
2 进程间通信相关概念
2.1 什么是进程间通信
Linux环境下,进程地址空间相互独立,每个进程各自有不同的用户地址空间。任何一个进程的全局变量在另一个进程中都看不到,所以进程和进程之间不能相互访问,要交换数据必须通过内核,在内核中开辟一块缓冲区,进程1把数据从用户空间拷到内核缓冲区,进程2再从内核缓冲区把数据读走,内核提供的这种机制称为进程间通信(IPC,InterProcess Communication)。
2.2 进程间通信的方式
在进程间完成数据传递需要借助操作系统提供特殊的方法,如:文件、管道、信号、共享内存、消息队列、套接字、命名管道等。随着计算机的蓬勃发展,一些方法由于自身设计缺陷被淘汰或者弃用。现今常用的进程间通信方式有:
- 管道 (使用最简单)
- 信号 (开销最小)
- 共享映射区 (无血缘关系)
- 本地套接字 (最稳定)
3 管道-pipe
3.1管道的概念
管道是一种最基本的IPC机制,也称匿名管道,应用于有血缘关系的进程之间,完成数据传递。调用pipe函数即可创建一个管道。
有如下特质:
- 管道的本质是一块内核缓冲区
- 由两个文件描述符引用,一个表示读端,一个表示写端。
- 规定数据从管道的写端流入管道,从读端流出。
- 当两个进程都终结的时候,管道也自动消失。
- 管道的读端和写端默认都是阻塞的。
3.2管道的原理
- 管道的实质是内核缓冲区,内部使用环形队列实现。
- 默认缓冲区大小为4K,可以使用ulimit -a命令获取大小。
- 实际操作过程中缓冲区会根据数据压力做适当调整。
3.3管道的局限性
- 数据一旦被读走,便不在管道中存在,不可反复读取。
- 数据只能在一个方向上流动,若要实现双向流动,必须使用两个管道
- 只能在有血缘关系的进程间使用管道。
3.4创建管道-pipe函数
-
函数作用:
创建一个管道
-
函数原型:
int pipe(int fd[2]);
-
函数参数:
若函数调用成功,fd[0]存放管道的读端,fd[1]存放管道的写端
-
返回值:
成功返回0;
失败返回-1,并设置errno值。
函数调用成功返回读端和写端的文件描述符,其中fd[0]是读端,fd[1]是写端,向管道读写数据是通过使用这两个文件描述符进行的,读写管道的实质是操作内核缓冲区。
管道创建成功以后,创建该管道的进程(父进程)同时掌握着管道的读端和写端。如何实现父子进程间通信呢?
3.5父子进程使用管道通信
一个进程在由pipe()创建管道后,一般再fork一个子进程,然后通过管道实现父子进程间的通信(因此也不难推出,只要两个进程中存在血缘关系,这里的血缘关系指的是具有共同的祖先,都可以采用管道方式来进行通信)。父子进程间具有相同的文件描述符,且指向同一个管道pipe,其他没有关系的进程不能获得pipe()产生的两个文件描述符,也就不能利用同一个管道进行通信。
第一步:父进程创建管道
第二步:父进程fork出子进程
第三步:父进程关闭fd[0],子进程关闭fd[1]
创建步骤总结:
- 父进程调用pipe函数创建管道,得到两个文件描述符fd[0]和fd[1],分别指向管道的读端和写端。
- 父进程调用fork创建子进程,那么子进程也有两个文件描述符指向同一管。
- 父进程关闭管道读端,子进程关闭管道写端。父进程可以向管道中写入数据,子进程将管道中的数据读出,这样就实现了父子进程间通信。
3.6 管道练习
- 一个进程能否使用管道完成读写操作呢?
- 使用管道完成父子进程间通信?
-
父子进程间通信, 实现ps aux | grep bash
使用execlp函数和dup2函数
/*
* @Descripttion: 使用pipe完成ps aux | grep bash
* @version:
* @Author: Lzy
* @Date: 2021-07-21 16:50:31
* @LastEditors: Lzy
* @LastEditTime: 2021-07-21 17:52:46
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/wait.h>
int main(int argc, char **argv)
{
int fd[2];
int ret = pipe(fd);
if (ret < 0)
{
perror("pipe error");
return -1;
}
pid_t pid = fork();
if (pid < 0)
{
perror("fork error");
}
else if (pid > 0)
{
close(fd[0]);
dup2(fd[1], STDOUT_FILENO);
execlp("ps", "ps", "aux", NULL);
perror("excelp error");
wait(NULL);
}
else
{
close(fd[1]);
dup2(fd[0], STDIN_FILENO);
execlp("grep", "grep", "bash", NULL);
perror("execlp error");
}
return 0;
}
-
兄弟进程间通信, 实现ps aux | grep bash
使用execlp函数和dup2函数
父进程要调用waitpid函数完成对子进程的回收
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <unistd.h>
#include <errno.h>
int main()
{
int fd[2];
int ret;
pid_t pid;
//创建一个管道
ret = pipe(fd);
if(ret<0)
{
perror("pipe error");
return -1;
}
int i = 0;
int n = 2;
for(i=0; i<n; i++)
{
//创建子进程
pid = fork();
if(pid<0)
{
perror("fork error");
return -1;
}
else if(pid==0)
{
break;
}
}
if(i==n)
{
close(fd[0]);
close(fd[1]);
pid_t wpid;
int status;
while(1)
{
//等待回收子进程
wpid = waitpid(-1, &status, WNOHANG);
if(wpid==0) //没有子进程退出
{
sleep(1);
continue;
}
else if(wpid==-1) //已经没有子进程
{
printf("no child is living, wpid==[%d]\n", wpid);
exit(0);
}
else if(wpid>0)
{
if(WIFEXITED(status)) //正常退出
{
printf("child normal exited, status==[%d]\n", WEXITSTATUS(status));
}
else if(WIFSIGNALED(status)) //被信号杀死
{
printf("child killed by signo==[%d]\n", WTERMSIG(status));
}
}
}
}
//第一个子进程
if(i==0)
{
close(fd[0]);
//将标准输出重定向到管道到写端
dup2(fd[1], STDOUT_FILENO);
execlp("ps", "ps", "aux", NULL);
perror("execlp error");
close(fd[1]);
}
//第二个子进程
if(i==1)
{
printf("child: fpid==[%d], cpid==[%d]\n", getppid(), getpid());
close(fd[1]);
//将标准输入重定向到管道到读端
dup2(fd[0], STDIN_FILENO);
execlp("grep", "grep", "--color", "bash", NULL);
perror("execlp error");
close(fd[0]);
}
return 0;
}
3.7 管道的读写行为
- 读操作
- 有数据:read正常读,返回读出的字节数
- 无数据:写端全部关闭:read解除阻塞,返回0, 相当于读文件读到了尾部;没有全部关闭:read阻塞。
- 写操作
- 读端全部关闭:管道破裂,进程终止, 内核给当前进程发SIGPIPE信号
- 读端没全部关闭:缓冲区写满了,write阻塞;缓冲区没有满,继续write。
3.8 如何设置管道为非阻塞
默认情况下,管道的读写两端都是阻塞的,若要设置读或者写端为非阻塞,则可参考下列三个步骤进行:
第1步:
int flags = fcntl(fd[0], F_GETFL, 0);
第2步:
flag |= O_NONBLOCK;
第3步:
fcntl(fd[0], F_SETFL, flags);
若是读端设置为非阻塞:
- 写端没有关闭,管道中没有数据可读,则read返回-1;
- 写端没有关闭,管道中有数据可读,则read返回实际读到的字节数
- 写端已经关闭,管道中有数据可读,则read返回实际读到的字节数
- 写端已经关闭,管道中没有数据可读,则read返回0
3.9 如何查看管道缓冲区大小
-
命令
ulimit -a
- 函数
long fpathconf(int fd, int name);
printf("pipe size==[%ld]\n", fpathconf(fd[0], _PC_PIPE_BUF));
printf("pipe size==[%ld]\n", fpathconf(fd[1], _PC_PIPE_BUF));
4 FIFO
4.1 FIFO介绍
FIFO常被称为命名管道,以区分管道(pipe)。管道(pipe)只能用于“有血缘关系”的进程间通信。但通过FIFO,不相关的进程也能交换数据。
FIFO是Linux基础文件类型中的一种(文件类型为p,可通过ls -l查看文件类型)。但FIFO文件在磁盘上没有数据块,文件大小为0,仅仅用来标识内核中一条通道。进程可以打开这个文件进行read/write,实际上是在读写内核缓冲区,这样就实现了进程间通信。
4.2 创建管道
-
方式1-使用命令 mkfifo
命令格式: mkfifo 管道名
例如:mkfifo myfifo
-
方式2-使用函数
int mkfifo(const char *pathname, mode_t mode);
参数说明和返回值可以查看man 3 mkfifo
当创建了一个FIFO,就可以使用open函数打开它,常见的文件I/O函数都可用于FIFO。如:close、read、write、unlink等。
FIFO严格遵循先进先出(first in first out),对FIFO的读总是从开始处返回数据,对它们的写则把数据添加到末尾。它们不支持诸如lseek()等文件定位操作。
4.3 使用FIFO完成两个进程通信
- 使用FIFO完成两个进程通信的示意图
思路:
- 进程A:
- 创建一个fifo文件:myfifo
- 调用open函数打开myfifo文件
- 调用write函数写入一个字符串如:“hello world”(其实是将数据写入到了内核缓冲区)
- 调用close函数关闭myfifo文件
- 进程B:
- 调用open函数打开myfifo文件
- 调用read函数读取文件内容(其实就是从内核中读取数据)
- 打印显示读取的内容
- 调用close函数关闭myfifo文件
注意:myfifo文件是在进程A中创建的,如果先启动进程B会报错。思考一下如何解决这个问题呢???
进程A写入数据
/*
* @Descripttion:
* @version:
* @Author: Lzy
* @Date: 2021-07-22 16:54:53
* @LastEditors: Lzy
* @LastEditTime: 2021-07-22 17:33:56
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
int main(int argc, char **argv)
{
// int access(const char *pathname, int mode);
int ret = access("./myfifo", F_OK);
if (ret == -1)
{
//文件不存在
// int mkfifo(const char *pathname, mode_t mode);
ret = mkfifo("./myfifo", 0777);
if (ret == -1)
{
perror("mkfifo error:");
return -1;
}
}
int fd = open("./myfifo",O_RDWR);
if (fd == -1){
perror("open error:");
return -1;
}
write(fd,"hello world!\n",sizeof("hello world"));
sleep(20);
close(fd);
return 0;
}
进程B读取数据
/*
* @Descripttion:
* @version:
* @Author: Lzy
* @Date: 2021-07-22 16:54:53
* @LastEditors: Lzy
* @LastEditTime: 2021-07-22 18:01:43
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
int main(int argc, char **argv)
{
// int access(const char *pathname, int mode);
int ret = access("./myfifo", F_OK);
if (ret == -1)
{
//文件不存在
// int mkfifo(const char *pathname, mode_t mode);
ret = mkfifo("./myfifo", 0777);
if (ret == -1)
{
perror("mkfifo error:");
return -1;
}
}
int fd = open("./myfifo",O_RDWR);
if (fd == -1){
perror("open error:");
return -1;
}
char str[20];
memset(str,0,sizeof(str));
read(fd,str,sizeof(str));
printf("read is %s",str);
close(fd);
return 0;
}
5 内存映射区
5.1 存储映射区介绍
存储映射I/O (Memory-mapped I/O) 使一个磁盘文件与存储空间中的一个缓冲区相映射。从缓冲区中取数据,就相当于读文件中的相应字节;将数据写入缓冲区,则会将数据写入文件。这样,就可在不使用read和write函数的情况下,使用地址(指针)完成I/O操作。
使用存储映射这种方法,首先应通知内核,将一个指定文件映射到存储区域中。这个映射工作可以通过mmap函数来实现。
5.2 mmap函数
-
函数作用:
建立存储映射区
-
函数原型
void *mmap(void *addr, size_t length, int prot, int flags, int fd, off_t offset);
-
函数返回值:
成功:返回创建的映射区首地址;
失败:MAP_FAILED宏
- 参数:
- addr: 指定映射的起始地址, 通常设为NULL, 由系统指定
- length:映射到内存的文件长度
-
prot: 映射区的保护方式, 最常用的:
读:PROT_READ
写:PROT_WRITE
读写:PROT_READ | PROT_WRITE
-
flags: 映射区的特性, 可以是
MAP_SHARED: 写入映射区的数据会写回文件, 且允许其他映射该文件的进程共享。
MAP_PRIVATE: 对映射区的写入操作会产生一个映射区的复制(copy-on-write), 对此区域所做的修改不会写回原文件。
- fd:由open返回的文件描述符, 代表要映射的文件。
- offset:以文件开始处的偏移量, 必须是4k的整数倍, 通常为0, 表示从文件头开始映射。
5.3 munmap函数
-
函数作用:
释放由mmap函数建立的存储映射区
-
函数原型:
int munmap(void *addr, size_t length);
-
返回值:
成功:返回0
失败:返回-1,设置errno值
- 函数参数:
- addr:调用mmap函数成功返回的映射区首地址
- length:映射区大小(mmap函数的第二个参数)
5.4 mmap注意事项
- 创建映射区的过程中,隐含着一次对映射文件的读操作,将文件内容读取到映射区
- 当MAP_SHARED时,要求:映射区的权限应 <=文件打开的权限(出于对映射区的保护)。而MAP_PRIVATE则无所谓,因为mmap中的权限是对内存的限制。
- 映射区的释放与文件关闭无关,只要映射建立成功,文件可以立即关闭。
- 特别注意,当映射文件大小为0时,不能创建映射区。所以,用于映射的文件必须要有实际大小;mmap使用时常常会出现总线错误,通常是由于共享文件存储空间大小引起的。
- munmap传入的地址一定是mmap的返回地址。坚决杜绝指针++操作。
- 文件偏移量必须为0或者4K的整数倍
- mmap创建映射区出错概率非常高,一定要检查返回值,确保映射区建立成功再进行后续操作。
5.5 有关mmap函数的使用总结
- 第一个参数写成NULL
- 第二个参数要映射的文件大小 > 0
- 第三个参数:PROT_READ 、PROT_WRITE
- 第四个参数:MAP_SHARED 或者 MAP_PRIVATE
- 第五个参数:打开的文件对应的文件描述符
- 第六个参数:4k的整数倍
5.6 mmap函数相关思考题
- 可以open的时候O_CREAT一个新文件来创建映射区吗?
- 如果open时O_RDONLY, mmap时PROT参数指定PROT_READ|PROT_WRITE会怎样?
- mmap映射完成之后, 文件描述符关闭,对mmap映射有没有影响?
- 如果文件偏移量为1000会怎样?
- 对mem越界操作会怎样?
- 如果mem++,munmap可否成功?
- mmap什么情况下会调用失败?
- 如果不检测mmap的返回值,会怎样?
5.7 mmap应用练习
- 练习1:使用mmap完成对文件的读写操作
/*
* @Descripttion: 使用mmap完成对文件的读写操作,传入第一个参数为文件名,若没传入则使用默认文件"test.log"。
* @version:
* @Author: Lzy
* @Date: 2021-07-22 14:36:29
* @LastEditors: Lzy
* @LastEditTime: 2021-07-22 15:02:25
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/wait.h>
int main(int argc, char **argv)
{
int fd = 0;
char *filename = NULL;
if (argc > 1)
{
//传入文件名,使用提供文件
filename = argv[1];
}
else
{
//使用默认文件名
filename = "test.log";
}
printf("%s\n", filename);
// int access(const char *pathname, int mode);
fd = open(filename, O_RDWR | O_CREAT, 0777);
if (fd == -1)
{
perror("open error:");
}
// ssize_t write(int fd, const void *buf, size_t count);
//使文件大小大于0,mmap函数要求
write(fd, "1", strlen("1"));
//获取文件大小
struct stat statbuf;
int ret = stat(filename, &statbuf);
if (ret < 0)
{
perror("stat error:");
}
// void *mmap(void *addr, size_t length, int prot, int flags,
// int fd, off_t offset);
void *addr = mmap(NULL, statbuf.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
if (addr == MAP_FAILED)
{
perror("mmap error");
return -1;
}
memcpy(addr, "hello world!", strlen("hello world!"));
char *str = (char *)addr;
printf("read is [%s]\n", str);
return 0;
}
- 练习:2:使用mmap完成父子进程间通信
- 图解说明
- 思路
- 调用mmap函数创建存储映射区,返回映射区首地址ptr
- 调用fork函数创建子进程,子进程也拥有了映射区首地址
- 父子进程可以通过映射区首地址指针ptr完成通信
- 调用munmap函数释放存储映射区
/*
* @Descripttion: 使用mmap完成父子进程间通信,传入第一个参数为文件名,若没传入则使用默认文件"test.log"。
* @version:
* @Author: Lzy
* @Date: 2021-07-22 14:36:29
* @LastEditors: Lzy
* @LastEditTime: 2021-07-22 16:46:01
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/wait.h>
int main(int argc, char **argv)
{
int fd = 0;
char *filename = NULL;
if (argc > 1)
{
//传入文件名,使用提供文件
filename = argv[1];
}
else
{
//使用默认文件名
filename = "test.log";
}
printf("%s\n", filename);
// int access(const char *pathname, int mode);
fd = open(filename, O_RDWR | O_CREAT, 0777);
if (fd == -1)
{
perror("open error:");
}
// ssize_t write(int fd, const void *buf, size_t count);
//使文件大小大于0,mmap函数要求
write(fd, "1", strlen("1"));
//获取文件大小
struct stat statbuf;
int ret = stat(filename, &statbuf);
if (ret < 0)
{
perror("stat error:");
}
// void *mmap(void *addr, size_t length, int prot, int flags,
// int fd, off_t offset);
void *addr = mmap(NULL, statbuf.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
if (addr == MAP_FAILED)
{
perror("mmap error");
return -1;
}
pid_t pid = fork();
if(pid < 0){
perror("fork error:");
}else if(pid > 0){
memcpy(addr,"hello world!",strlen("hello world!"));
wait(NULL);
munmap(addr,statbuf.st_size);
}else if(pid == 0){
char str [20];
memset(str,0,sizeof(str));
memcpy(str,addr,strlen(addr));
printf("read is [%s]\n",str);
}
return 0;
}
-
练习3:使用mmap完成没有血缘关系的进程间通
思路:两个进程都打开相同的文件,然后调用mmap函数建立存储映射区,这样两个进程共享同一个存储映射区。
进程一写文件:
/*
* @Descripttion: 使用mmap完成没有血缘关系的进程间通,传入第一个参数为文件名,若没传入则使用默认文件"test.log"。
* @version:
* @Author: Lzy
* @Date: 2021-07-22 14:36:29
* @LastEditors: Lzy
* @LastEditTime: 2021-07-22 16:52:25
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/wait.h>
int main(int argc, char **argv)
{
int fd = 0;
char *filename = NULL;
if (argc > 1)
{
//传入文件名,使用提供文件
filename = argv[1];
}
else
{
//使用默认文件名
filename = "test.log";
}
printf("%s\n", filename);
// int access(const char *pathname, int mode);
fd = open(filename, O_RDWR | O_CREAT, 0777);
if (fd == -1)
{
perror("open error:");
}
// ssize_t write(int fd, const void *buf, size_t count);
//使文件大小大于0,mmap函数要求
write(fd, "1", strlen("1"));
//获取文件大小
struct stat statbuf;
int ret = stat(filename, &statbuf);
if (ret < 0)
{
perror("stat error:");
}
// void *mmap(void *addr, size_t length, int prot, int flags,
// int fd, off_t offset);
void *addr = mmap(NULL, statbuf.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
if (addr == MAP_FAILED)
{
perror("mmap error");
return -1;
}
char str [20];
memset(str,0,sizeof(str));
memcpy(str,addr,strlen(addr));
printf("read is [%s]\n",str);
return 0;
}
进程2读
/*
* @Descripttion: 使用mmap完成没有血缘关系的进程间通,传入第一个参数为文件名,若没传入则使用默认文件"test.log"。
* @version:
* @Author: Lzy
* @Date: 2021-07-22 14:36:29
* @LastEditors: Lzy
* @LastEditTime: 2021-07-22 16:52:25
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/wait.h>
int main(int argc, char **argv)
{
int fd = 0;
char *filename = NULL;
if (argc > 1)
{
//传入文件名,使用提供文件
filename = argv[1];
}
else
{
//使用默认文件名
filename = "test.log";
}
printf("%s\n", filename);
// int access(const char *pathname, int mode);
fd = open(filename, O_RDWR | O_CREAT, 0777);
if (fd == -1)
{
perror("open error:");
}
// ssize_t write(int fd, const void *buf, size_t count);
//使文件大小大于0,mmap函数要求
write(fd, "1", strlen("1"));
//获取文件大小
struct stat statbuf;
int ret = stat(filename, &statbuf);
if (ret < 0)
{
perror("stat error:");
}
// void *mmap(void *addr, size_t length, int prot, int flags,
// int fd, off_t offset);
void *addr = mmap(NULL, statbuf.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
if (addr == MAP_FAILED)
{
perror("mmap error");
return -1;
}
char str [20];
memset(str,0,sizeof(str));
memcpy(str,addr,strlen(addr));
printf("read is [%s]\n",str);
return 0;
}
- 练习4:使用mmap函数建立匿名映射:mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS, -1, 0);(父子进程分享)
/*
* @Descripttion: 测试mmap匿名映射进行亲缘关系通信(推荐)
* @version:
* @Author: Lzy
* @Date: 2021-07-22 10:43:24
* @LastEditors: Lzy
* @LastEditTime: 2021-07-22 14:34:15
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/wait.h>
int main(int argc, char **argv)
{
// void *mmap(void *addr, size_t length, int prot, int flags,
// int fd, off_t offset);
void *addr = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS, -1, 0);
if (addr == MAP_FAILED)
{
perror("mmap error");
return -1;
}
pid_t pid = fork();
if (pid < 0)
{
perror("fork error");
return -1;
}
else if (pid > 0)
{
memcpy(addr, "hello world!", strlen("hello world!"));
wait(NULL);
}
else if (pid == 0)
{
char *p = (char *)addr;
printf("%s", p);
}
return 0;
}