注解說明
• 注冊注解處理器
• 方式一:bean
<bean class="org.springframework.beans.factory.annotation.
AutowiredAnnotationBeanPostProcessor"/>
• 方式二: 命名空間<context:annotation-config />
<context:annotationconfig /> 将隐式地向Spring 容器注冊AutowiredAnnotationBeanPostProcessor 、CommonAnnotationBeanPostProcessor 、 PersistenceAnnotationBeanPostProcessor 以及RequiredAnnotationBeanPostProcessor 這4 個BeanPostProcessor 。
• 方式三: 命名空間<context:component-scan />
如果要使注解工作,則必須配置component-scan ,實際上不需要再配置annotation-config。
base-package 屬性指定了需要掃描的類包,類包及其遞歸子包中所有的類都會被處理。還允許定義過濾器将基包下的某些類納入或排除。
• Spring 支援以下4 種類型的過濾方式:
• 注解 org.example.SomeAnnotation 将所有使用SomeAnnotation 注解的類過濾出來
• 類名指定 org.example.SomeClass 過濾指定的類
• 正規表達式 com.kedacom.spring.annotation.web..* 通過正規表達式過濾一些類
• AspectJ 表達式 org.example..*Service+ 通過AspectJ 表達式過濾一些類
• 正規表達式的過濾方式舉例:
<context:component-scanbase-package="com.casheen.spring.annotation">
<context:exclude-filtertype="regex"
expression="com.casheen.spring.annotation.web..*"/>
</context:component-scan>
• 注解的過濾方式舉例:
<context:component-scan base-package="com.netqin" >
<context:include-filter type="annotation"
expression="org.springframework.stereotype.Controller"/>
<context:include-filter type="annotation"
expression="org.springframework.stereotype.Service"/>
<context:include-filter type="annotation"
expression="org.springframework.stereotype.Repository"/>
</context:component-scan>
啟用Spring MVC 注解
• 啟動Spring MVC 的注解功能,完成請求和注解POJO 的映射
• <bean class="org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter"/>
注解介紹
• @Controller
• @Service
• @Autowired
• @RequestMapping
• @RequestParam
• @ModelAttribute
• @Cacheable
• @CacheFlush
• @Resource
• @PostConstruct
• @PreDestroy
• @Repository
• @Component (不推薦使用)
• @Scope
• @SessionAttributes
• @InitBinder
• @Required
• @Qualifier
@Controller
• 例如
@Controller
public class SoftCreateController extends SimpleBaseController {}
• 或者
@Controller("softCreateController")
• 說明
@Controller 負責注冊一個bean 到spring 上下文中,bean 的ID 預設為類名稱開頭字母小寫
@Service
• 例如
@Service
public class SoftCreateServiceImpl implements ISoftCreateService {}
• 或者
@Service("softCreateServiceImpl")
• 說明
@Service 負責注冊一個bean 到spring 上下文中,bean 的ID 預設為類名稱開頭字母小寫
@Autowired
• 例如
@Autowired
private ISoftPMService softPMService;
• 或者
@Autowired(required=false)
private ISoftPMService softPMService = new SoftPMServiceImpl();
• 說明
@Autowired 根據bean 類型從spring 上線文中進行查找,注冊類型必須唯一,否則報異常。與@Resource 的差別在于,@Resource 允許通過bean 名稱或bean 類型兩種方式進行查找@Autowired(required=false) 表示,如果spring 上下文中沒有找到該類型的bean 時, 才會使用new SoftPMServiceImpl();
@Autowired 标注作用于 Map 類型時,如果 Map 的 key 為 String 類型,則 Spring 會将容器中所有類型符合 Map 的 value 對應的類型的 Bean 增加進來,用 Bean 的 id 或 name 作為 Map 的 key。
@Autowired 還有一個作用就是,如果将其标注在 BeanFactory 類型、ApplicationContext 類型、ResourceLoader 類型、ApplicationEventPublisher 類型、MessageSource 類型上,那麼 Spring 會自動注入這些實作類的執行個體,不需要額外的操作。
@RequestMapping
• 類
@Controller
@RequestMapping("/bbtForum.do")
public class BbtForumController {
@RequestMapping(params = "method=listBoardTopic")
public String listBoardTopic(int topicId,User user) {}
}
• 方法
@RequestMapping("/softpg/downSoftPg.do")
@RequestMapping(value="/softpg/ajaxLoadSoftId.do",method = POST)
@RequestMapping(value = "/osu/product/detail.do", params = { "modify=false" }, method =POST)
• 說明
@RequestMapping 可以聲明到類或方法上
• 參數綁定說明
如果我們使用以下的 URL 請求:
http://localhost/bbtForum.do?method=listBoardTopic&topicId=1&userId=10&userName=tom
topicId URL 參數将綁定到 topicId 入參上,而 userId 和 userName URL 參數将綁定到 user 對象的 userId 和 userName 屬性中。和 URL 請求中不允許沒有 topicId 參數不同,雖然 User 的 userId 屬性的類型是基本資料類型,但如果 URL 中不存在 userId 參數,Spring 也不會報錯,此時 user.userId 值為 0 。如果 User 對象擁有一個 dept.deptId 的級聯屬性,那麼它将和 dept.deptId URL 參數綁定。
@RequestParam
• 參數綁定說明
@RequestParam("id")
http://localhost/bbtForum.do?method=listBoardTopic&id=1&userId=10&userName=tom
listBoardTopic(@RequestParam("id")int topicId,User user) 中的 topicId 綁定到 id 這個 URL 參數, 那麼可以通過對入參使用 @RequestParam 注解來達到目的
@RequestParam(required=false):參數不是必須的,預設為true
@RequestParam(value="id",required=false)
請求處理方法入參的可選類型
• Java 基本資料類型和 String
預設情況下将按名稱比對的方式綁定到 URL 參數上,可以通過 @RequestParam 注解改變預設的綁定規則
• request/response/session
既可以是 Servlet API 的也可以是 Portlet API 對應的對象,Spring 會将它們綁定到Servlet 和 Portlet 容器的相應對象上
• org.springframework.web.context.request.WebRequest
内部包含了 request 對象
• java.util.Locale
綁定到 request 對應的 Locale 對象上
• java.io.InputStream/java.io.Reader
可以借此通路 request 的内容
• java.io.OutputStream / java.io.Writer
可以借此操作 response 的内容
• 任何标注了 @RequestParam 注解的入參
被标注 @RequestParam 注解的入參将綁定到特定的 request 參數上。
• java.util.Map / org.springframework.ui.ModelMap
它綁定 Spring MVC 架構中每個請求所建立的潛在的模型對象,它們可以被 Web 視圖對象通路(如 JSP )
• 指令/ 表單對象(注:一般稱綁定使用 HTTP GET 發送的 URL 參數的對象為指令對象,而稱綁定使用HTTP POST 發送的 URL 參數的對象為表單對象)
它們的屬性将以名稱比對的規則綁定到 URL 參數上,同時完成類型的轉換。
而類型轉換的規則可以通過 @InitBinder 注解或通過 HandlerAdapter 的配置進行調 整
• org.springframework.validation.Errors / org.springframework.validation.BindingResult
為屬性清單中的指令/ 表單對象的校驗結果,注意檢驗結果參數必須緊跟在指令/ 表單對象的後面
• org.springframework.web.bind.support.SessionStatus
可以通過該類型 status 對象顯式結束表單的處理,這相當于觸發 session 清除其中的通過@SessionAttributes 定義的屬性
請求處理方法傳回值的可選類型
• void
此時邏輯視圖名由請求處理方法對應的 URL 确定,如以下的方法:
@RequestMapping("/welcome.do")
public void welcomeHandler() {}
對應的邏輯視圖名為 “ welcome ”
• String
此時邏輯視圖名為傳回的字元,如以下的方法:
@RequestMapping(method = RequestMethod.GET)
public String setupForm(@RequestParam("ownerId") int ownerId, ModelMap model) {
Owner owner = this.clinic.loadOwner(ownerId);
model.addAttribute(owner);
return "ownerForm";
}
對應的邏輯視圖名為 “ ownerForm ”
• org.springframework.ui.ModelMap
和傳回類型為 void 一樣,邏輯視圖名取決于對應請求的 URL ,如下面的例子:
@RequestMapping("/vets.do")
public ModelMap vetsHandler() {
return new ModelMap(this.clinic.getVets());
}
對應的邏輯視圖名為 “ vets ” ,傳回的 ModelMap 将被作為請求對應的模型對象,可以在 JSP 視圖頁面中通路到。
• ModelAndView
當然還可以是傳統的 ModelAndView 。
@ModelAttribute
• 作用域:request
• 例如
@RequestMapping("/base/userManageCooper/init.do")
public String handleInit(@ModelAttribute("queryBean") ManagedUser sUser,Model model,){
• 或者
@ModelAttribute("coopMap")// 将coopMap 傳回到頁 面
public Map<Long,CooperatorInfo> coopMapItems(){}
• 說明
@ModelAttribute 聲明在屬性上,表示該屬性的value 來源于model 裡"queryBean" ,并被儲存到model 裡@ModelAttribute 聲明在方法上,表示該方法的傳回值被儲存到model 裡
@Cacheable 和@CacheFlush
• @Cacheable :聲明一個方法的傳回值應該被緩 存
例如:@Cacheable(modelId = "testCaching")
• @CacheFlush :聲明一個方法是清空緩存的觸發器
例如:@CacheFlush(modelId = "testCaching")
• 說明
要配合緩存處理器使用,參考: http://hanqunfeng.iteye.com/blog/603719
@Resource
• 例如
@Resource
private DataSource dataSource; // inject the bean named 'dataSource'
• 或者
@Resource(name="dataSource")
@Resource(type=DataSource.class)
• 說明
@Resource 預設按bean 的name 進行查找,如果沒有找到會按type 進行查找,
此時與@Autowired 類 似
在沒有為 @Resource 注解顯式指定 name 屬性的前提下,如果将其标注在 BeanFactory 類型、ApplicationContext 類型、ResourceLoader 類型、ApplicationEventPublisher 類型、MessageSource 類型上,那麼 Spring 會自動注入這些實作類的執行個體,不需要額外的操作。此時 name 屬性不需要指定 ( 或者指定為""),否則注入失敗;
@PostConstruct 和@PreDestroy
• @PostConstruct
在方法上加上注解@PostConstruct ,這個方法就會在Bean 初始化之後被Spring 容器執 行
(注:Bean 初始化包括,執行個體化Bean ,并裝配Bean 的屬性(依賴注入))。
• @PreDestroy
在方法上加上注解@PreDestroy ,這個方法就會在Bean 被銷毀前被Spring 容器執行。
@Repository
• 與@Controller 、@Service 類似,都是向spring 上下文中注冊bean ,不在贅述。
@Component (不推薦使用)
• @Component
@Component 是所有受Spring 管理元件的通用形式,Spring 還提供了更加細化的注解形式: @Repository 、@Service 、@Controller ,它們分别對應存儲層Bean ,業務層Bean ,和展示層Bean 。
目前版本(2.5 )中,這些注解與@Component 的語義是一樣的,完全通用, 在Spring 以後的版本中可能會給它們追加更多的語義。 是以,我們推薦使用@Repository 、@Service 、@Controller 來替代@Component 。
@Scope
• 例如
@Scope("session")
@Repository()
public class UserSessionBean implementsSerializable {}
• 說明
在使用XML 定義Bean 時,可以通過bean 的scope 屬性來定義一個Bean 的作用範圍,
同樣可以通過@Scope 注解來完成
@Scope中可以指定如下值:
singleton:定義bean的範圍為每個spring容器一個執行個體(預設值)
prototype:定義bean可以被多次執行個體化(使用一次就建立一次)
request:定義bean的範圍是http請求(springMVC中有效)
session:定義bean的範圍是http會話(springMVC中有效)
global-session:定義bean的範圍是全局http會話(portlet中有效)
@SessionAttributes
• 說明
Spring 允許我們有選擇地指定 ModelMap 中的哪些屬性需要轉存到 session 中,
以便下一個請求屬對應的 ModelMap 的屬性清單中還能通路到這些屬性。
這一功能是通過類定義處标注 @SessionAttributes 注解來實作的。
@SessionAttributes 隻能聲明在類上,而不能聲明在方法上。
• 例如
@SessionAttributes("currUser") // 将ModelMap 中屬性名為currUser 的屬性
@SessionAttributes({"attr1","attr2"})
@SessionAttributes(types = User.class)
@SessionAttributes(types = {User.class,Dept.class})
@SessionAttributes(types = {User.class,Dept.class},value={"attr1","attr2"})
@InitBinder
• 說明
如果希望某個屬性編輯器僅作用于特定的 Controller ,
可以在 Controller 中定義一個标注 @InitBinder 注解的方法,
可以在該方法中向 Controller 了注冊若幹個屬性編輯器
• 例如
@InitBinder
public void initBinder(WebDataBinder binder) {
SimpleDateFormat dateFormat = new SimpleDateFormat("yyyy-MM-dd");
dateFormat.setLenient(false);
binder.registerCustomEditor(Date.class, new CustomDateEditor(dateFormat, false));
}
@Required
• 例如
@required
public setName(String name){}
• 說明
@ required 負責檢查一個bean在初始化時其聲明的 set方法是否被執行, 當某個被标注了 @Required 的 Setter 方法沒有被調用,則 Spring 在解析的時候會抛出異常,以提醒開發者對相應屬性進行設定。 @Required 注解隻能标注在 Setter 方法之上。因為依賴注入的本質是檢查 Setter 方法是否被調用了,而不是真的去檢查屬性是否指派了以及賦了什麼樣的值。如果将該注解标注在非 setXxxx() 類型的方法則被忽略。
@Qualifier
• 例如
@Autowired
@Qualifier("softService")
private ISoftPMService softPMService;
• 說明
使用@Autowired 時,如果找到多個同一類型的bean,則會抛異常,此時可以使用 @Qualifier("beanName"),明确指定bean的名稱進行注入,此時與 @Resource指定name屬性作用相同。
參考資料
• jdk1.5 注解介紹
http://hi.baidu.com/gaoyaodi/blog/item/4cee6cf4706f2dddf3d385cd.html
• spring2.5 注解
http://www.infoq.com/cn/articles/spring-2.5-part-1
http://www.infoq.com/cn/articles/spring-2.5-ii-spring-mvc
• spring3.0 注解
http://tech.ddvip.com/2010-05/1273461026153068.html