The new machine in June has been released, and the new machine in July is being warmed up one after another, and the number of new machines is expected to exceed that in June, there are already a number of new machines in the warm-up, such as OPPO, Red Devil, real me and other mobile phone brands, this is just the first batch of new machines, and there will be new machines to warm up later. On the whole, the new machines in June are mainly small folding screens and new tablets, and the difference is in July, which is dominated by high-end machines, game phones and other models. At the same time, Qualcomm's Snapdragon 8 Gen 3 leading version was also launched at the same time, and the Red Devil gaming phone won the first launch.
In fact, the models equipped with the Snapdragon 8 Gen 3 leading version are more positioned in terms of performance + games, mainly because games have high requirements for mobile phone performance. In terms of carrying rate alone, the Snapdragon 8s Gen 3 chip is more popular, whether it is on smartphones or tablets, this chip is present. The Snapdragon 7+ Gen 3 chip released at the same time does not have a very high carrying rate, after all, the performance is not low or high. For example, the Snapdragon 8 series chips are positioned at the high-end and flagship levels, while the Snapdragon 7 series chips are mainly mid-range, and the Snapdragon 6 series chips are mainly low-end.
At the same time, OPPO's new machine was officially announced, and it will be officially released on July 2, the model is OPPO A3 new machine, positioned in the low-end machine market, so the configuration is not high. The focus of the new machine is on the screen, body, drop resistance and wear resistance, etc., which is similar to the previous OPPO A3 Pro, after all, it is the same series of models, and it is normal to have the same positioning. At the same time,OPPO official has also warmed up the appearance of the new machine、Body thickness、Screen design and other aspects have also been warmed up to a certain extent,After all, the new machine is not far from the release time,Natural high-speed preheating。
According to the official warm-up, the OPPO A3 new machine has three colors, namely mountain stream green, aurora purple, and quiet sea black, while the rear camera group adopts a circular plate design. There are four punch holes on the rear, two of which are cameras, a flash, and the other should be decorative. The screen adopts a straight screen + centered single punch hole design, which is also the design scheme adopted by the most new machines at present. The thickness of the body is 7.15mm, which is thinner than the Oppo A3 Pro version (7.53mm), and the weight of the new device has not warmed up for the time being, and it is expected to be within 200g. In terms of drop resistance and wear resistance, it is mainly optimized and upgraded in terms of fuselage glass and architecture.
According to exposure, the new OPPO A3 machine is equipped with SM6375 processor, which should be Qualcomm's Snapdragon 6s Gen 3 chip, using 6nm process technology, CPU is octa-core, respectively, 2 2.3GHz A78, 6 2.202GHzA55, GPU is Adreno619, and the performance is naturally low-end. The screen is a 6.7-inch centered punch-hole screen with an FHD+ (high definition) resolution and is expected to support a 120Hz refresh rate. Although the performance of the screen is not very high, it has also reached the low-end level, and the design is also in line with the market demand, and the drip screen is not used.
The image configuration of the new machine has also been exposed, with a front camera of 8 million pixels, and a dual camera on the rear, which are the main camera of 50 million pixels, and a camera of 2 million pixels. It's still okay to shoot as a life-level, after all, the positioning of the new machine is not high, and the cost is limited. The battery capacity of the new device is 5000mAh, and the charging speed has not been announced for the time being. It has three configuration versions, namely 8GB+256GB, 12GB+256GB/512GB version, and supports 1TB expansion. On the whole, the new machine is more suitable for positioning in the old machine, low-end machine, and standby machine market.
[Note: The picture comes from the Internet/official, such as infringement and deletion of the picture; This article is original and must be investigated for infringement. ]