There is a special mold temperature machine called die-casting mold temperature machine in the industrial mold temperature machine equipment, and the die-casting special mold temperature machine is the name of the temperature control equipment in the die-casting industry, which is mainly used in a variety of die-casting process industries. At present, the special mold temperature machine for die-casting is used more in magnesium-aluminum alloy die-casting, zinc alloy and other die-casting. With the development of industry, mold temperature machine manufacturers have also emerged, and there are large and small manufacturers all over the country. In the process of using the die-casting special mold temperature machine, the mold temperature machine manufacturer Xingde Machinery suggests that users should collect several requirements for the use of the mold temperature machine to better help users use the mold temperature machine equipment.
Mold temperature machine
1. Preparation before use: Before using the die-casting special mold temperature machine, you should pay attention to whether the hydraulic gauge of the die-casting special mold temperature machine and various parts such as power supply, heater, controller, pressure gauge, pump, etc. are in normal working condition. Whether the valve of the cooling water pipeline of the mold temperature machine is opened, and whether the cooling water supply is normal; Turn on the power supply of the control cabinet, check whether the voltage of the mold temperature machine is normal, and check whether the indicator light and each display instrument are normal. Check whether there is any debris around, and if there is debris that needs to be cleaned up, especially flammable and explosive materials. Be careful to check for leaks around the mold temperature machine. There should be sufficient fire-fighting equipment near oil and electrical equipment. Do not use water as a fire extinguishing agent.
2. Key points in use: In the use of the mold temperature machine, the operation of the mold temperature machine equipment should be guaranteed to be trouble-free. During the use process, the operator should pay attention to the operation of the mold temperature machine, and adjust the parameters and emergencies in time. If you hear an abnormal sound in the mold temperature machine, you also need to stop the machine for inspection, and you must not continue to use it.
Mold temperature machine manufacturers
3. Lower the temperature 10 minutes before shutting down and keep it below 70 °C, because the surface temperature of the heating tube can reach 600~700 °C, it will be shut down suddenly, the heat transfer medium is not circulating, and carbon is often formed on the surface of the heating tube, which affects the use of the high-temperature oil/water pump unit
This results in a slower heating rate and a pungent odor.
It should be noted that during the process of the mold temperature machine, the water pump and oil pump of the mold temperature machine should be checked regularly for oil leakage. If necessary, the shaft seal of the pump can also be replaced periodically. Replace the heat transfer oil regularly, for the oil temperature machine above 200 °C, we need to replace the heat transfer oil regularly every two to three months, and for the oil temperature machine below 200 °C, we can replace it every six months or so, so as to avoid the problem of temperature can not be added. Check whether there is any unobstructed place in the inlet and outlet pipes of the equipment. The inlet filter needs to be checked, this is a place where dirt tends to accumulate and it is recommended to clean it regularly.
Die-casting mold temperature machine
As a die-casting special mold temperature machine manufacturer, whether it is R & D manufacturing or practical technology is very experienced, here to provide customers with several requirements for the use of die-casting special mold temperature machine, is after many on-site installation and maintenance of technical personnel, it is helpful to every customer, can be collected for later use.