簡介
Netstat 指令用于顯示各種網絡相關資訊,如網絡連接配接,路由表,接口狀态 (Interface Statistics),masquerade
連接配接,多點傳播成員 (Multicast Memberships) 等等。
輸出資訊含義
執行netstat後,其輸出結果為
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp .:telnet .: ESTABLISHED
tcp .: .:netbios-ssn ESTABLISHED
tcp localhost.localdom: localhost.localdom: ESTABLISHED
tcp localhost.localdom: localhost.localdom: ESTABLISHED
tcp .: .:netbios-ssn CLOSE
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags Type State I-Node Path
unix [ ] STREAM CONNECTED @000000dd
unix [ ] STREAM CONNECTED @000000dc
unix [ ] DGRAM /dev/log
unix [ ] STREAM CONNECTED @000000df
從整體上看,netstat的輸出結果可以分為兩個部分:
一個是Active Internet
connections,稱為有源TCP連接配接,其中"Recv-Q"和"Send-Q"指%0A的是接收隊列和發送隊列。這些數字一般都應該是0。如果不是則表示軟體包正在隊列中堆積。這種情況隻能在非常少的情況見到。
另一個是Active UNIX domain
sockets,稱為有源Unix域套接口(和網絡套接字一樣,但是隻能用于本機通信,性能可以提高一倍)。
Proto顯示連接配接使用的協定,RefCnt表示連接配接到本套接口上的程序号,Types顯示套接口的類型,State顯示套接口目前的狀态,Path表示連接配接到套接口的其它程序使用的路徑名。
常見參數
-a (all)顯示所有選項,預設不顯示LISTEN相關
-t (tcp)僅顯示tcp相關選項
-u
(udp)僅顯示udp相關選項
-n 拒絕顯示别名,能顯示數字的全部轉化成數字。
-l 僅列出有在 Listen (監聽) 的服務狀态
-p 顯示建立相關連結的程式名
-r 顯示路由資訊,路由表
-e 顯示擴充資訊,例如uid等
-s 按各個協定進行統計
-c
每隔一個固定時間,執行該netstat指令。
提示:LISTEN和LISTENING的狀态隻有用-a或者-l才能看到
實用指令執行個體
1. 列出所有端口
(包括監聽和未監聽的)
列出所有端口 netstat -a
# netstat -a | more
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp localhost: *:* LISTEN
udp *:bootpc *:*
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix [ ACC ] STREAM LISTENING /tmp/.X11-unix/X0
unix [ ACC ] STREAM LISTENING //run/acpid.socket
列出所有 tcp 端口 netstat -at
# netstat -at
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp localhost: *:* LISTEN
tcp localhost:ipp *:* LISTEN
tcp *:smtp *:* LISTEN
tcp6 localhost:ipp [::]:* LISTEN
列出所有 udp 端口 netstat -au
# netstat -au
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp *:bootpc *:*
udp *: *:*
udp *:mdns *:*
2. 列出所有處于監聽狀态的
Sockets
隻顯示監聽端口 netstat -l
# netstat -l
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp localhost:ipp *:* LISTEN
tcp6 localhost:ipp [::]:* LISTEN
udp *: *:*
隻列出所有監聽 tcp 端口 netstat -lt
# netstat -lt
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp localhost: *:* LISTEN
tcp *:smtp *:* LISTEN
tcp6 localhost:ipp [::]:* LISTEN
隻列出所有監聽 udp 端口 netstat -lu
# netstat -lu
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
udp *: *:*
udp *:mdns *:*
隻列出所有監聽 UNIX 端口 netstat -lx
# netstat -lx
Active UNIX domain sockets (only servers)
Proto RefCnt Flags Type State I-Node Path
unix [ ACC ] STREAM LISTENING /maildrop
unix [ ACC ] STREAM LISTENING /cleanup
unix [ ACC ] STREAM LISTENING /ifmail
unix [ ACC ] STREAM LISTENING /bsmtp
3. 顯示每個協定的統計資訊
顯示所有端口的統計資訊 netstat -s
# netstat -s
Ip:
total packets received
with invalid addresses
forwarded
incoming packets discarded
incoming packets delivered
requests sent
Icmp:
ICMP messages received
input ICMP message failed.
Tcp:
active connections openings
failed connection attempts
connection resets received
Udp:
packets received
packets to unknown port received.
.....
顯示 TCP 或 UDP 端口的統計資訊 netstat -st 或 -su
# netstat -st
# netstat -su
4. 在 netstat 輸出中顯示 PID 和程序名稱 netstat
-p
netstat -p 可以與其它開關一起使用,就可以添加 “PID/程序名稱” 到 netstat 輸出中,這樣 debugging
的時候可以很友善的發現特定端口運作的程式。
# netstat -pt
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp ramesh-laptop.loc: .:www CLOSE_WAIT /firefox
tcp ramesh-laptop.loc: lax:www ESTABLISHED /firefox
5. 在 netstat 輸出中不顯示主機,端口和使用者名 (host,
port or user)
當你不想讓主機,端口和使用者名顯示,使用 netstat -n。将會使用數字代替那些名稱。
同樣可以加速輸出,因為不用進行比對查詢。
# netstat -an
如果隻是不想讓這三個名稱中的一個被顯示,使用以下指令
# netsat -a --numeric-ports
# netsat -a --numeric-hosts
# netsat -a --numeric-users
6. 持續輸出 netstat
資訊
netstat 将每隔一秒輸出網絡資訊。
# netstat -c
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp ramesh-laptop.loc: ---.ama:www ESTABLISHED
tcp ramesh-laptop.loc: .:www CLOSING
tcp ramesh-laptop.loc: server----:www ESTABLISHED
tcp ramesh-laptop.loc: .:www CLOSING
^C
7. 顯示系統不支援的位址族 (Address
Families)
netstat --verbose
在輸出的末尾,會有如下的資訊
netstat: no support `AF IPXnetstat: no support `AF AX25netstat: no support `AF X25netstat: no support `AF NETROM
8. 顯示核心路由資訊 netstat
-r
# netstat -r
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
. * . U eth2
link-local * . U eth2
. . UG eth2
注意: 使用 netstat -rn 顯示數字格式,不查詢主機名稱。
9. 找出程式運作的端口
并不是所有的程序都能找到,沒有權限的會不顯示,使用 root 權限檢視所有的資訊。
# netstat -ap | grep ssh
tcp dev-db:ssh .: CLOSE_WAIT -
tcp dev-db:ssh .: CLOSE_WAIT -
找出運作在指定端口的程序
# netstat -an | grep ':80'
10. 顯示網絡接口清單
# netstat -i
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
eth0 BMU
eth2 BMRU
lo LRU
顯示詳細資訊,像是 ifconfig 使用 netstat -ie:
# netstat -ie
Kernel Interface table
eth0 Link encap:Ethernet HWaddr :::::
UP BROADCAST MULTICAST MTU: Metric:
RX packets: errors: dropped: overruns: frame:
TX packets: errors: dropped: overruns: carrier:
collisions: txqueuelen:
RX bytes: ( B) TX bytes: ( B)
Memory:f6ae0000-f6b00000
11. IP和TCP分析
檢視連接配接某服務端口最多的的IP位址
wss8848@ubuntu:~$ netstat -nat | grep "192.168.1.15:22" |awk '{print $5}'|awk -F: '{print $1}'|sort|uniq -c|sort -nr|head -20
18 221.136.168.36
3 154.74.45.242
2 78.173.31.236
2 62.183.207.98
2 192.168.1.14
2 182.48.111.215
2 124.193.219.34
2 119.145.41.2
2 114.255.41.30
1 75.102.11.99
TCP各種狀态清單
wss8848@ubuntu:~$ netstat -nat |awk
established)
Foreign
LISTEN
TIME_WAIT
ESTABLISHED
TIME_WAIT
SYN_SENT
wss8848@ubuntu:~$ netstat -nat |awk '{print $6}'|sort|uniq -c
143 ESTABLISHED
1 FIN_WAIT1
1 Foreign
1 LAST_ACK
36 LISTEN
6 SYN_SENT
113 TIME_WAIT
1 established)
netstat -nat |awk '{print $6}'|sort|uniq -c|sort -rn
awk '{print $1}' access.log |sort|uniq -c|sort -nr|head -10