At the end of October this year, the Toyota II GR 86 was officially released in Japan, due to chip shortages, the new car sales time needs to be postponed to the first quarter of next year, but for the local JAPANESE GR 86 players, the recent ushered in good news. Toyota's Gazoo Racing performance division recently brought a series of GR Parts modification kits to the car, in addition to the appearance of exclusive air components, a new shape of forged aluminum rings, but also provide high and low adjustable shock absorbers, body shock rods, high-performance braking system and other chassis enhancement projects, making the GR 86 a track machine suitable for both mobile and static!
The original second-generation GR 86 has a very eye-catching dynamic body, but with the support of the GR Parts air power kit, it can be said that the finishing touch makes the overall appearance more murderous. First of all, the front part of the car is introduced into the GR front and lower spoiler wings, combined with the body color and matte black contrast coating, there is an improvement in the front aerodynamic effect, as for the outer edge of the left and right air intakes on both sides of the bumper also add horizontal spoiler fins, it is said that it can suppress the vehicle roll phenomenon when cornering, bringing a more linear driving experience.
The side of the car is replaced with a side skirt group of the same color as the body and the black trim is inserted to enhance the sense of layering. But the most eye-catching is still the newly developed, 19-inch five-spoke forged aluminum ring with a FALKEN AZENIS FK510 tire set in size 215/35 R19. On top of the original trunk spoiler wing, the rear part of the car has introduced a set of more streamlined ducktail spoiler wings, with the Aero stabilizing cover on the lower side of the rear windshield, which can rectify the air flowing to the trunk, improve the aerodynamic properties of the rear, and increase the tail downforce on the one hand. Other components such as the GR High Performance Exhaust Tailpipe and rear lower spoiler trim give the GR 86 a more performance-enhancing look.
Of course, if you want to further strengthen the details of the body, the original factory also provides aluminum / carbon fiber material mixed fuel tank cover, GR door handle protection sleeve, carbon fiber license plate frame, GR rain window, etc., rear triangle window / rear windshield anti-infrared film (can reduce the temperature inside the car, improve the air conditioning effect) and so on.
For the GR 86 chassis, a range of upgrade components are also available at the original plant. Such as the high and low gry high performance shock absorber, can further reduce the height of the car by 15mm, taking into account the dynamic handling reaction and road comfort, as for the engine room also introduced shock relief lever (Performance Damper), not only can absorb vibration from the road surface, but also has the effect of improving the steering reaction. Not only that, but the chassis section can also be selected with structural tie rods located at the front and rear wheels, which can increase rigidity and inhibit the degree of deformation of the body.
If you add a GR brake kit, in addition to the front four rear two-in-one brake calipers, it also provides a large disc (front 345mm, rear 330mm), coupled with GR brake pads, so that the braking performance and recession resistance are better.