Home decoration, from traditional decoration gradually to custom decoration for the transformation. In fact, the so-called custom decoration here is actually mainly the customization of some wooden products in our interior. The customization of wooden products includes the customization of various cabinets such as our indoor cabinets, wardrobes, lockers, balcony cabinets, bathroom cabinets, etc. And in all the cabinets here, in fact, the most important material is the plate. Because the plate is closely related to the environmental protection of our indoors, the choice of plate is particularly critical. For different decoration companies to push out the plate is also different. In this article, the home miscellaneous altar will answer the question of which plate is more environmentally friendly. The home miscellaneous altar summarizes the more commonly used plates at present, mainly including the following six kinds, which are to give you answers.
(1): Solid wood planks
(1), solid wood board, can be said to be the highest level of environmental protection at present, can also be said that solid wood board is no pollutant board. Because the solid wood board is made by cutting the raw material using the raw wood, there is no chemical composition in the solid wood board. Solid wood board is currently the most high-grade, the most environmentally friendly decoration board.
(2) Production process. The production process of solid wood panels is also very simple, that is, the processing of traditional wooden products. The raw material it uses is our wood, which is cut into plates according to the thickness requirements of a section of wood, and then the plates are processed to form the solid wood boards we require. The surface of solid wood boards is divided into many kinds according to different treatment processes. For example, we are more common in the solid wood of the baking paint board, and there is the solid wood board of the log board, that is, the surface does not do baking paint and so on.
(3) Select Suggestion. Because the environmental requirements of solid wood boards are very high, and the processing technology requirements of solid wood boards on the boards themselves are relatively high, the scope of use is limited. For example, the moisture content of the plate is required to meet the requirements, and the density of the plate must also meet the requirements, which leads to the restriction of solid wood board in many aspects. When choosing solid wood panels, we must pay attention to particularly humid places, do not choose solid wood boards, and where it is easy to shine in the sun, it is not recommended that you choose solid wood boards. Therefore, at present, solid wood panels are generally used for wooden floors in our homes, as well as furniture and so on.
(2): Solid wood finger joint
(1), solid wood fingering board, if from the perspective of environmental performance, personally think that it is second only to solid wood board a kind of board. With solid wood finger joints, it itself also needs to use some glue, which is what we often call white latex, but its dosage is very small. Therefore, its environmental performance is also relatively good.
(2) Production process. The production and manufacturing process of solid wood fingerboard, that is, the use of logs as raw materials, but the specification size of the log is relatively small, it needs to be processed into different sizes, and then in the place where the board is docked, it is similar to the way of finger jointing, so it is called solid wood fingerboard. Solid wood direct board, because the upper and lower surface does not need to paste the plywood, so the amount of glue used is also very small. Solid wood fingerboard is non-toxic and harmless board, very environmentally friendly and safe.
(3) Select Suggestion. For solid wood fingerboards, you will often see them. Like many of the assembled furniture we buy, most of them are solid wood fingerboards. However, the solid wood fingerboard has a very fatal defect, that is, it is easy to crack, and its stability is not particularly good, so now the solid wood fingerboard is rarely used in custom furniture. In fact, there is another reason, that is, the price of solid wood fingerboard is still relatively high. Therefore, we customize furniture at home, and it is generally not recommended that you choose solid wood fingerboard. However, if you choose some small assembly furniture, you can choose solid wood finger joints.
(3): Large core plate
(1), large core board, in fact, also known as joinery board. This kind of plate is also divided into different types according to the different core materials. For example, some core materials are whole pieces of wood, but some core materials are made of wood strips spliced together. In general, on the upper and lower surfaces of the large core board, a single board is pasted, and the middle is the board or wooden strip. Its environmental protection level, I personally think is not particularly good. In terms of environmental protection, the large core board is behind the solid wood board and the finger joint board.
(2) For the large core board, it is divided into different environmental protection grades. For example, we often say that the E1 level of the large core board, there is the European standard E0 level of the large core board. Here we must choose a large core plate above E1 when choosing. In fact, the amount of large core board is still relatively large, if we use a large number of large core boards, it may also cause the overall indoor formaldehyde content to exceed the standard. Even if we choose to meet the criteria, it is not necessarily guaranteed that there will be no harm to our human body.
(4): Plywood
(1), in fact, the so-called plywood also refers to multi-layer board. Plywood is currently a kind of on-site processing plate that is more commonly used. What we see is that after the plate is cut, the inside is layer by layer, which is made by pressing a single sheet of thin plate. The environmental performance of plywood is not particularly good, and the environmental protection of plywood is even worse than that of large core board.
(2) Select Suggestions. For plywood, personally believe that it is not recommended for home improvement products or customized products in home improvement. For example, plywood is only used for temporary reinforcement parts, such as the protection of the ground, the protection of the doorway, the use of plywood, and in the local ceiling, may also use a large core board. But few use large core boards to make custom furniture.
(5): Granule plate
(1), particle board, in fact, our other name is particle board. The raw material of the granular plate is the use of some particles that are completely crushed, which can also be solid wood particles, or the particles of a type of plant such as straw and bark. The specific production process is that the middle is thick particles, the fine particles used in the upper and lower layers, or similar to shavings, and finally a large amount of glue is added to the press. Therefore, the environmental performance of the granular board is even worse than that of the large core board, and the multi-layer board is between Bo Zhong.
(2) Select Suggestions. At present, there are many granular plates on the market. Brands like the ones we know well, such as EGGER board, Dew River, Crosbond, etc., are actually particle boards used. This is due to the fact that the structure of the granular plate itself is very stable, and the overall processability is very good, especially when it comes to factory processing. Granular board is currently the most commonly used material in customized products in home improvement. Therefore, when we choose, we must choose a granular plate that meets the standard. For example, we have to choose the E1 level standard, so that its formaldehyde release is very small, which can meet the indoor use.
(vi): MDF
(1) MDF is a plate made of some wood materials used as raw materials, crushed and pressed. At this time, the crushing is not granules or broken fibers, and then added glue to press the formation, so after the MDF is cut, it is found that the interior is similar to a powder. However, the MDF is also a manually manufactured such plate, and the glue content is still relatively large. It can be said that MDF is the same as particle board, the amount of glue used is not too different, and the environmental protection is basically the same.
(2) Select Suggestions. For MDF, we also know that there is another name, called Euthonne board, in fact, they are essentially a kind of plate, but the production place is different. For MDF, furniture is rarely used today. In our home improvement, the place where we can commonly use MDF is the door panel, the partition wall. For custom furniture cabinets, cabinet doors, try not to choose MDF.
Conclusion
For the various plates used in home improvement, we must understand their environmental performance. So when we choose a decoration company, if it is customized by the decoration company, we must ask the decoration company which kind of plate is used, and then what is the qualification standard of this plate. For this point, the above is also more detailed, so you can go to a careful understanding when choosing. Finally, I would like to remind you that it is the plate we choose for home improvement, in fact, the preferred plate is solid wood board, granular board and large core board. In addition, there is a kind of plate called ecological board, we can also understand, in fact, ecological board is only a name for surface treatment, like we often say multi-layer board, density board, large core board, etc., if you use paper dip treatment, you can make ecological board, this must be clear to everyone.
【Personal originality, picture from the network, infringement link is deleted】