丨 Preface
One of the things that drove me the most crazy about this year's New Year was the cleaning, because my family lived in a relatively high place, so in order to prevent accidents, I also installed an anti-theft net early in the decoration. At the beginning of the two years, I did not find any drawbacks, I thought it was still quite practical, after all, safety is the best. But the problem is that the window of my room and living room only has a two-thirds A4 paper-sized opening, and only one hand can be reached out, coupled with the obstruction of the anti-theft net, which makes it very difficult to clean the window when cleaning, and the outer side of the glass is difficult to wipe.
So, after wiping a window glass for two hours, I resolutely called the housekeeping staff to clean it. Although it cost a few hundred dollars, the effect was really good, and every place was very clean. And I learned that aunt cleaning used an artifact called the "window cleaning robot" when cleaning the window, which can be automatically cleaned as long as it is placed on the window. So I wondered in my heart, why not start a window cleaning robot, so that you don't have to be so crazy when you clean the window, and the cost performance is still high, after all, please ask the housekeeping to clean it once for hundreds.
Ecovacs (Ecovacs) window treasure WINBOT W1 PRO window cleaning robot glass cleaning robot home window cleaning artifact WG888-11 ¥2899 purchase
丨About the Coworth W1 Pro window cleaning robot
Coworth (Ecovacs) window treasure WINBOT W1 PRO window cleaning robot (hereinafter referred to as: Cobos W1 Pro) is a model I finally started after a few days of shopping on Taobao, at that time I liked it: on the one hand, I liked the good reputation of the Coworth brand, on the other hand, I learned that the overall product of Coworth W1 Pro was very good, so I started.
The outer packaging is a large carton, and the blue and white color scheme is quite stylish.
After opening the carton, there was a small surprise, Cobos actually came with a very good quality storage box, fabric material texture, and we usually use the notebook storage box about the same size. It is also excellent to close the zipper and install the window cleaner and take it to the mother-in-law's house for cleaning.
Open the storage box and you can see the Coworth W1 Pro console and a bunch of accessories, neatly stacked.
In addition to the main unit, the accessories have a power cord, safety hooks, special cleaning fluids and two gaskets.
Take a look at the console of the Coworth W1 Pro, the appearance is square, which is conducive to cleaning the window area without leaving dead corners.
There is a POWER button on the front, which I originally thought was a power switch, but it was actually just a start/pause key, and the real power switch was set at the bottom of the machine.
Next to the POWER button is the water injection port, the Coworth W1 Pro comes with a 60ml capacity water tank, and the water injection port can be filled with special detergent or water to start working.
To be honest, before I started the Coworth W1 Pro, I also seriously thought about "Will it fall?" This problem, even combined with the previous purchase of Taobao on the free hole suction cup hook fell within two months of use, came to the conclusion that "the window cleaning robot is not reliable". But after taking a deeper look at how window-cleaning robots work, I overturned that conclusion. Because the principle of window cleaning robot adsorbing on glass is to use the vacuum pump or fan at its bottom to create suction to adsorb the machine on the glass, and then drive it through the roller to achieve "walking" on the glass surface.
Of course, just like a fat man weighing hundreds of pounds is inconvenient to walk, this suction is not to say that the bigger the better. And the suction power of this Coworth W1 Pro is 2800PA. It is understood that this is the best suction value obtained after many tests, which can ensure the reliability of the machine when working, and can ensure that the operation will not be hindered because of excessive suction.
Speaking of this, there should be many small partners to complain: "We don't understand what 2800PA suction, you can say it in layman's terms." emm...... The simple 2800PA suction is about the same as the load of 80KG, which can withstand 10 winds. Therefore, the 1.5kg cobos W1 Pro with a net weight of 1.5kg theoretically has no risk of falling after turning on the working mode - but the safety rope still has to be tied, after all, it is not afraid of ten thousand.
It is worth mentioning that for window cleaning robots, the risk of falling is not only related to suction, but also the timing belt and the driving wheel. After all, the window cleaning robot relies on suction adsorption on the one hand, and on the other hand, it must be wiped by the timing belt and the movement of the driving wheel. At this time, if the quality of the wheel is not up to standard, then it is easy to slip, or even get stuck, which will indeed increase the risk of falling.
This Coworth W1 Pro adopts a set of intelligent climbing system, with four major characteristics: 1, the timing belt uses a new type of hybrid rubber material with wear-resistant, non-slip, non-sticking characteristics, the surface and pattern embedding, to a certain extent, reduce the risk of slippage; 2, the drive wheel is external, to avoid water, can make the machine "walking" more stable; 3, the drive wheel adopts a three-point support design, with the timing belt can effectively improve the contact area with the glass, avoid falling off at the same time can also increase cleaning efficiency; 4, Timing belt cleaning to reduce secondary contamination.
In addition, the Coworth W1 Pro also has guide wheels in the bottom four corners, and also installs anti-drop sensors on each wheel, which can further ensure the safety of the machine when working in combination with the intelligent detection system.
The Coworth W1 Pro also offers two window wipes made of one-piece special yarns, and microfibers are attached to both the front and back surfaces, with a water retention rate of up to 400%, making it theoretically easier to remove stubborn stains.
丨 Actual experience
Work before some preparation, first of all, add water, Coworth W1 Pro has a built-in 60ml water tank, official data shows that a full can wipe about 20 square meters of glass area, enough for 3 to 4 rooms of the window glass to clean, but if you also want to wipe the living room floor to ceiling windows then you also need to add water. In addition, if you want to clean better, the Coworth W1 Pro also comes with a bottle of Cobos window treasure special cleaning liquid, or it is good to use the car's glass water.
Next, the window wipe cloth is wet with water and glued to the bottom of the machine.
Then the safety rope should be fixed, hooked with a hook or tied directly to the fixed guardrail. The maximum load capacity of this rope is 80kg, which can ensure that the Cobos W1 Pro does not fall even in the event of an accident.
After the preparation work is completed, the next step is to put the Coworth W1 Pro on the window glass (remember to put it on the flat glass surface, do not get stuck on the side of the window frame, so as not to weaken the adsorption), when you press the start button, you can clearly feel the suction appear, and then let go.
Put a GIF for you to feel, really suck very steadily, don't worry about it falling.
The Coworth W1 Pro has three built-in working modes, the first being Quick Mode and Deep Mode, the difference between the former cleaning 1 time and the latter cleaning 2 times. The last one is the fixed-point mode, if you encounter a stubborn stain, you can turn on this mode, and then the machine will repeatedly wipe 4 times in a specific local location to achieve the strongest cleaning effect.
As can be seen during the cleaning process, the sides of the Coworth W1 Pro can be sprayed with water in both directions. In general, if the glass is not particularly dirty, the default quick mode can meet the cleaning needs, which shows that the two-way cross water spray design is indeed powerful.
If you use it with the App, you can unlock more functions, and the pairing process is very simple, after turning on the power, let the App find the device to connect.
The APP can also choose the type of voice, for example, I live in the Cantonese area, naturally choose Cantonese.
Before the official start of cleaning, the app will also give the operation steps, follow the steps step by step, there will be no mistakes.
Of course, I use the most and count the fixed point function of the APP, which can freely control the cleaning position and can also spray water manually, which is very convenient.
丨 written at the end
Just as there is no easy job in the world, there is no housework in this world that is easy, like my house window cleaning is a very crazy housework, and the risk factor is relatively high. Therefore, I think it is still necessary to start a window cleaning robot, after all, its cleaning efficiency is much higher than that of human hands, and it is also particularly worry-free. In addition, the use experience of this Coworth W1 Pro is still good, the cleaning efficiency is very high, generally I can polish the whole glass with a quick mode, and the time consuming is relatively short. At the same time, there has been no jamming in the process of "walking" of the machine, and it is recommended that you try it.