How to choose a suitable industrial computer for you? There is a lot of learning in this, and today the source of industrial computer manufacturers gives you science popularization. Generally speaking, the choice of industrial computer should pay attention to 6 aspects, the specific content is provided by the Freer industrial computer, the shared industrial computer science knowledge, I hope to help you in need of friends.
First, consider the actual working environment installation space requirements. Depending on the on-site installation size, you can choose from 1U to 7U industrial computers of different sizes (suitable for rackmount installation) and smaller fanless embedded industrial computers (suitable for embedded installation). Before purchasing the industrial computer, the installation space should be measured in advance, and if the embedded is selected, the opening size should be planned in advance, which can be consulted in detail.
Second, choose the installation method on the basis of the installation space. At present, the mainstream industrial computer installation methods such as Freer industrial computers on the market can choose wall-mounted, rack-mounted, desktop, embedded, and at the same time, it is also necessary to consider the front outlet, the rear outlet, etc., to avoid wiring difficulties and improper installation of the rework trouble.
Third, it depends on the requirements of the application environment. According to the needs of the environment, choose different industrial computers, if it is a low temperature or high temperature environment, to consider the wide temperature industrial computer, if it is a dusty working environment, large vibration, there is classical radiation interference, then it is necessary to choose an industrial computer with good anti-resistance performance, Freer Industrial Control attaches great importance to this performance.
Fourth, see if the configuration meets the requirements or can be customized. Although the computing power requirements of the industrial computer are not as high as those of the commercial computer, as with the purchase of the computer, the purchase of the industrial computer also depends on the processor, storage, memory and other configurations. Now the industrial computer, standard and optional can meet most industrial application requirements, if there is a special need, can allow manufacturers to customize.
Fifth, look at extensibility. Because in actual use, the industrial computer needs to connect many external devices, so it depends on what interface type is actually needed, whether there are CPCI, USB, and other types of interfaces, PCI, PCIE slots and so on. Knock on the point: If you buy not an industrial computer but an assembly machine, pay attention to considering the interface problem when selecting the board. Now the I/O modules of the industrial computer are very rich, and everyone should focus on the problem of adaptation and expansion.
Sixth, look at the brand. Industrial computer is a product applied in key occasions, directly related to the success or failure of the entire project, so the choice of brand is very important! The more the source manufacturer brand, the more will pay attention to the quality of the materials, the service will be more in place, can avoid a lot of trouble. In fact, there are also many greedy and cheap industrial control machines that buy some small workshops, either they are not durable, or they cut corners and shoddy.
Freer industrial computer source manufacturers, focusing on the field of industrial control for several years, hope to help everyone solve more industrial computer problems.