There are a lot of good-looking decoration designs, but when you land, you know that there are many "troublesome" details.
The "trouble" in the decoration design means that you have to run over and over again, confirm over and over again, and if you are not careful, the overturn will be completely overturned.
In this issue, the 10 popular decoration designs shared, don't mess with the stars who are afraid of trouble, and those who are not afraid of difficulties, have money and leisure, and also know what are the difficulties in implementation.
1. Retro sink
Retro washbasins are different from traditional washbasins, delicate and artistic, and usually have no storage cabinets, which is suitable for small apartments with the pursuit of appearance.
However, it is such a small sink that is difficult to implement.
First of all, the faucet, the wall faucet is exquisite, but it lacks the retro taste, the retro style of the non-wall faucet, and you have to consider the hidden problem of the hot and cold water inlet valve, and the basin alone does not have any blocking ability;
Then there is the sewerage, which is more suitable for wall rows, and the floor drainage is less interesting, and it also means that the sewer that is originally matched with the basin cannot be used, and you have to spend a hundred yuan budget to buy the sewer again.
The right-angle sewer, from the beginning of the buried pipe, you have to determine the height and angle, otherwise it will not be installed in the later stage, and the elbow will have to be added, which violates the original intention of appearance. (as shown below)
There are also some retro sinks that are more complicated, with a double-switch faucet.
Every time I wash my hands, the hot water is too hot, and the cold water is too cold, so I have to break it again and adjust it to the right temperature.
Adults may sacrifice a little sense of use because of their appearance, and they can accept it, but if they have children at home, they are afraid that they will burn their hands with hot water.
2. Flower tiles
In the past two years, the tile bathroom has been very popular, with a variety of designs, rich colors and textures, strong decorative effects, and the use of colors to make space partitions.
Especially in the bathroom, the impression of a small and messy space, under the decoration of tiles, can also become a rather artistic space, and the appearance is improved by several grades.
However, I don't know if I don't shop, and I really shop to my own home and find that the so-called appearance is based on countless troubles.
First of all, the bricklayer stage, when paving, the pattern is not on the seam, there will be a small wrong edge, the key is not the quality of the brick itself, it is a common problem that all tiles and small white bricks will appear, and it is simply a detail control.
Then, when it came to the beauty stage, it collapsed even more.
In the figure below, if you directly use white sewing, the small petals that come out are incomplete, and all of them are sewn with black, which is equivalent to expanding the gap and making it uglier.
To be perfect, you have to sew white on white and black on black.
It's not difficult to say, but when it is actually implemented, the sewing master will shirk all kinds of things, and finally have to spend more budget to realize his hobby.
This is still a black and white tile, if it is a colored, more subtle, delicate color, plus money may not be able to find a suitable sewing master.
When you have taken care of all the previous steps, you think that you can rest assured, then I advise you not to be happy too early, because, after a few years, it suddenly cracked, not a beautiful seam but a tile.
Only then did I know that 99% of the tiles on the market were semi-porcelain tiles, and semi-porcelain tiles had high water absorption, low hardness, easy water absorption and cracking, and were only suitable for wall tiles and not suitable for paving. (Crying without tears)
3. Double door
Because after the French style decoration became popular, the double door also became popular, the door opening was larger, and the exquisite line design made the sense of ceremony really sufficient.
Every time I see it, I hear the voice of "Princess, please come in!"
But calm down and think about it, people's double doors are opened by a special housekeeper, and they are two.
When we arrived at our own home, it would be a bit far-fetched to make a normal size door opening.
The key is that every time you open the door, you either have to open it with both hands at the same time to do stretching exercises, and if you want to enter it with one hand, you have to enter sideways, and suddenly I feel that the sense of ritual that I was once obsessed with is more like a tax on IQ.
Moreover, it is difficult to land with double doors, not to mention the problem that the proportion is not coordinated and not good-looking, the biggest difficulty is that the offline stores are not sold, all communication depends on comparison, and the landing effect depends on luck.
In the end, a lot of money was spent, and batch after batch of cars overturned.
In addition, like this arc door frame, there is also the problem of splicing seams, and it is almost impossible to see what needs to be repaired in the later stage.
4. Suspended TV wall
Complex TV background wall, because of high cost, easy obsolescence and other reasons, has been complained about in the past two years, and few people have made it at home.
Instead, the most popular is the design of the suspended TV wall, which looks lighter and more transparent, making the space at home more layered, more beautiful and atmospheric, full of modernity, and deeply loved by young decorators.
But the simpler the design, the more details need to be done behind it, such as the floating video wall, and the initial hydropower stage has to design the circuit network cable to ensure that it is completely hidden behind the TV.
Then the steel frame structure is fixed on the wall, and the approximate cost is about 1,000 yuan, which is an additional item to communicate with the decoration company in advance.
Immediately afterwards, it is necessary to use a carpentry board to make a base on the steel frame, which belongs to the scope of carpentry's work.
After this series is all done, it is relatively simple, and only the oiler needs to paint later.
However, it should be noted that,To get a good effect,In the embedded frame of the TV,You have to make a black paint base。
5. Colored wall
I have to admit that the color wall is definitely the lowest-cost personalized realization and creative implementation method in the decoration design.
The clever use of color can create a unique atmosphere and creative effect, and the implementation process is not complicated, and the implementation cost is not high, usually an extra color plus a few hundred dollars.
But the problem will be in the later stage, and the unified evaluation of those who have done it is: perfect but be careful.
Because, once scratched and broken, it is difficult to find the same color to repair in the later stage (the remaining wall paint of the same color will also have color difference due to oxidation and other reasons), not only for people who are afraid of trouble, anyone, should not tolerate the cost of the wall.
6. a wireframe wall
After the simple wall is decorated with a wireframe, it presents a rich sense of hierarchy and increases the three-dimensional sense of space.
Moreover, it looks exquisite and concise, and the cost of realization is not high, and it has properly become the most popular decoration design at present.
However, did you know that the wireframe of the wall needs to be installed at the putty stage, and then the oiler will paint the wall together so that there will be no color difference.
The so-called installation and painting, there are also a lot of details inside, such as the line has to be played before the line, and you have to run to the scene of the line to prevent the proportion from being inappropriate and affecting the aesthetics.
Then, when installing, you have to look at the details of the corner splicing, if there is a bump, the latex paint is not flat in the later stage, and this consumption is a day or two.
When spraying paint on the wall, check whether the color paint is completely covered inside and at the bottom of the corner flower.
If you don't know this, usually the oiler will not be too careful, because these details have to be brushed little by little with a small brush, unless the big decoration company, the individual oiler, is generally hasty.
In addition, there is an unexpected and helpless detail, that is, the ink of the elastic line, part of which cannot be covered with latex paint.
At this time, if you want to deal with it well, you have to use sandpaper to grind off the extra elastic line little by little, and the oiler will say that this is not its job, and the person who installs the line has already settled the account, so he has to keep coordinating and angry in the middle.
8. Ash Fall District
It is also called a sunken entrance, which was once very popular, because it has a height difference with the interior, using the height difference to form a dust area, wearing the outside and putting it under the steps, and putting the home slippers on the steps, which can avoid bringing the outside sand and dust into the room.
The express delivery you get back can also be dismantled here, clean and hygienic.
Therefore, many people who love cleanliness and lazy people blindly follow the trend, thinking that doing it during decoration can keep the home clean and reduce the frequency of cleaning.
In fact, it is not the case, let's talk about the implementation first, the indoor space is obviously unrealistic to cut the height of the floor, and it has to be raised as a whole except for the entrance, so as to sacrifice the height of the floor (some people think that the ground needs to be leveled, which is incidental and does not affect).
If the height of the layer can be accepted, down is the problem of closing, two of the same material is good, can be spliced directly, between different materials, such as between tiles and wooden floors, the closure has to use the closing strip, for which you have to find a closure strip that can adapt to two colors.
After everything is ready, there are many problems in use, because the sweeper can not go up and down the steps, the dust area has to be cleaned separately, and because of the small space, brooms, mops and other large cleaning tools are not easy to start, every time the cat is cleaned on the ground, I always feel a little aggrieved.
In addition, I am speechless that I am an adult, under the good decoration designed by my own hands, I don't know how many times I have tripped, and there are elderly and children at home, so I dare not think about how careful I usually be.
By the way, it is still the direction of opening the door, if you ignore that your own door is inside, it is likely that the entrance and the door will fight, resulting in the door not being fully opened.
8. a wall bed
For guest bedrooms that are not commonly used at home, but are occasionally useful, the designer's solution is to make wall beds.
As shown in the picture below, when opened, it is a double bed, which is not needed to be put away and becomes one with the cabinet, which is very invisible.
But then two new problems arise:
The first is that nothing can be placed in this space, otherwise when the bed is used, it must be moved, otherwise the bed will not fall, and the room without things will not look neat, but as monotonous as an empty room.
The second is that all the supplies on the bed cannot be hidden in place, and they have to be stored separately after all of them are taken away, which is super troublesome.
Before I did it, I kept thinking about whether this was the best solution, and after I actually did it, I couldn't help but think that this is not as practical as a sofa bed, or a bed directly, at least the former is usually a sofa, and the latter is not troublesome.
9. Herringbone flooring
Compared with the traditional floor, the wooden floor after the herringbone splicing is paved, and the interior space has a stronger sense of beauty and art.
The key is to visually stretch the space through a certain angle splicing, making the space appear more spacious and three-dimensional, which has ushered in the love of many young people, including me.
When the idea was put into action, I ran all over the building materials market with enthusiasm, but found that the smaller floor shop did not have a herringbone floor at all, and some of them were uneven in quality and expensive, and they were often three or five hundred and one square meters.
In the end, I don't know how many families I compared, and finally found the one I wanted, until I was complacent after moving in, the floor of my house is too good.
But the good times didn't last long, and I found that the splicing seams started very quickly from scratch, and they became bigger and bigger, so big that the rice grains could be cut out when they fell in.
At this time, I searched on the Internet again, and it turned out that my house was not an exception, as long as the herringbone floor was paved, this problem generally existed, and it was even worse in the south.
In addition, to tell you the truth, I have only lived for half a year, and I am tired of seeing the floor, and I don't know when it will become the tears of the times.
10. Invisible door
Is the invisible door good-looking? The answer is that it is really good-looking! But in addition to being good-looking, is there any advantage? It seems that it does not, and there are a lot of disadvantages.
First of all, it must be invisible enough, the wall must be made of the same material as the door, or the wall is covered with wall panels, and the whole wall is pasted, which is extremely expensive.
Moreover, to be invisible enough, the handle cannot be installed on the outside, then you have to use a hydraulic hinge, even if you have enough budget, three points:
First, there are too many wood trim panels, environmental protection problems, second, the installation of large gaps, uneven and other overturning problems, third, hydraulic hinges are easy to break.
Of course, in addition to wood veneer, you can also paint latex paint on the door and wall, which can avoid the first problem, but the second and third problems also exist, and there will be new problems, the door painted with latex paint is not resistant to dirt, easy to peel off the paint, etc.
In short, if you are a person who is afraid of trouble, this kind of flashy invisible door is still not recommended to be installed, even if you have enough patience and money, you must think about whether these problems can be borne before making plans.