Question bank source: Safety production mock test, one-stop public account applet
According to the requirements of the new N1 forklift driver test syllabus, the N1 forklift driver mock test questions will be compiled to form a set of N1 forklift driver mock test questions, and students can conduct N1 forklift driver self-test through the N1 forklift driver license test.
1. [Multiple choice questions] The "Special Equipment Safety Law of the People's Republic of China" stipulates that the user shall be ordered to stop using the relevant special equipment if it uses special equipment that has not been regularly inspected or has failed to pass the inspection, and shall be fined above () or below. （ AC ）
A, 30,000 yuan
B. 10,000 yuan
C. 300,000 yuan
2. [Multiple choice questions] The "Rules for the Administration of the Use of Special Equipment" stipulates that when the name of the user unit or property right unit is changed, the user unit or property right unit shall go to the registration authority to change its name and replace it with a new use registration certificate, and the registration authority shall mark the cancellation on the original use registration certificate and the original use registration form. （ ABD ）
A. The original use registration certificate
B. Proof of change of unit name
C. Periodic inspection report within the validity period
D. Refill in the use registration form (in duplicate).
3. [Multiple choice question] In order to restrict and control the running speed of the field car, the field car must be equipped with a braking system, and the main function of the braking system is (). （ ABD ）
A. Make the field car slow down quickly and even stop
B. Change the driving direction of the field car
C. Prevent the field car from exceeding a certain speed when going down a long slope
D. Make the field car park stably without slippery
4. [Multiple choice questions] People's unsafe behaviors are divided into (). （ ABCD ）
A. Unsafe position and posture
B. Dangerous behaviors and wrong actions
C. Violations of rules and regulations
D. Unsafe behaviors in joint work
5. [Multiple choice questions] Which of the following systems is an integral part of a diesel engine? （）（ ABD ）
A. Fuel supply system
B. Cooling system
C. Ignition system
D. Lubrication system
6. [Multiple choice questions] The maintenance of field cars can generally be divided into (). （ ABC ）
A. Daily maintenance
B. First-level maintenance
C. Secondary maintenance
D. Three-level maintenance
7. [Multiple choice questions] The main signs in the road traffic signs in the field (factory) area can be divided into (), operation area signs and notice signs. （ ABCD ）
A. Warning signs
B. Prohibition signs
C. Indication signs
D. Guiding signs
8. [Multiple choice question] The reason why the forklift oil pump motor does not work when operating the multi-way valve is (). （ ABC ）
A. The switch of the oil pump motor is out of order
B. The voltage is too low
C. Motor failure
D. Poor lubrication of the gantry
9. [Multiple choice question] The role of the vehicle brake is (). （ ABCD ）
A. Restrict the driving movement of the vehicle
B. Deceleration
C. Parking
D. Ensure safety
10. [Multiple choice questions] The technical measures that should be taken during the vehicle closing period are (). （ ABCD ）
A. Load shedding
B. Speed limit
C. Drive correctly
D. Choose high-quality fuels and lubricants to strengthen maintenance
11. [Multiple choice questions] The characteristics of the use of the vehicle during the closing period are (). （ ABC ）
A. The surface friction of the parts is fierce and the wear speed is fast
B. Lubricating oil deteriorates quickly
C. There are many driving failures
12. [Multiple choice questions] Lead-acid batteries are mainly composed of (). （ ABC ）
A. Electrolyte
B. Positive plate
C. Negative plate
D. Single-cell battery
13. [Multiple choice question] The "Special Equipment Safety Law of the People's Republic of China" stipulates that the department responsible for the safety supervision and management of special equipment shall establish a complete supervision and management file and () for the special equipment that has been registered for use in accordance with the law. （ C ）
A. Online publicity system
B. Retrieval system
C. Information query system
14. [Multiple choice question] The "Special Equipment Safety Law of the People's Republic of China" stipulates that if the special equipment user fails to register the use of special equipment in accordance with the regulations, it shall be ordered to make corrections within a time limit; If the correction is not made within the time limit, it shall be ordered to stop using the relevant special equipment and shall be fined (C)
A. Between 10,000 yuan and 50,000 yuan
B. Between 20,000 and 50,000 yuan
C. Between 10,000 yuan and 100,000 yuan
D. Between 30,000 yuan and 300,000 yuan
15. [Multiple choice question] The "Rules for the Management of the Use of Special Equipment" stipulates that the maintenance of special equipment shall meet the requirements of (). （ D ）
A. Use
B. Safety
C. Regulation
D. Relevant safety technical specifications and instructions for use and maintenance
16. [Multiple Choice] Traffic Sign Recognition - What kind of traffic sign is this?
（ B ）
A. Overtaking is prohibited
B. It is forbidden to go straight
C. No motor vehicles
D. It is forbidden to turn to the right
17. [Multiple choice question] The brand of internal combustion engine oil is large, indicating that it (). （ A ）
A. High viscosity
B. Small viscosity
C. Easy to vaporize
D. It is not easy to vaporize
18. [Multiple Choice] The "Special Equipment Safety Law of the People's Republic of China" was formulated to strengthen the safety of special equipment, prevent special equipment (), ensure personal and property safety, and promote economic and social development. （ C ）
A. Production safety accidents
B. Serious accidents
C. Accident
19. [Multiple choice question] Forklift injury accidents mainly involve three comprehensive factors: people, vehicles, and (). （ A ）
A. Road environment
B. Violations
C. Safety signs
20. [Multiple choice] The forklift shall not exceed () km/h on the main road in the factory. （ A ）
A、10
B、20
C、30
D、40
21. [Multiple choice question] In the event of an accident, we should follow the principle of "() do not let go", find out the cause, distinguish the responsibility, and deal with it seriously. （ B ）
A、三
B, IV
C. V
22. [Multiple choice question] In the workplace safety signs, the safety color of the sign is blue, which means: (). （ B ）
A. Remind people to pay attention
B. Directives, which require people to comply with them
C. Prohibition and Blocking
23. [Multiple choice question] It is not allowed to reverse at railway crossings () one-way roads, detours, narrow roads, steep slopes and other sections. （ C ）
A. Straight intersection
B. Honking and accelerating
C. Intersections
D. In the workshop
24. [Multiple choice question] Stop on the side of the road at night to prevent collisions. （ C ）
A. Turn off all lights in the car
B. Turn on all the lights in the car
C. Turn on the width indicator light and tail light
25. [Multiple choice question] For mechanically driven field vehicles, when downshifting, the first thing should be ensured (). （ C ）
A. The clutch has been released
B. Press the accelerator pedal
C. Reduce the speed of the vehicle to a speed suitable for the lower gear.
26. [Multiple choice question] For mechanically driven field cars, when upshifting, the driver should operate the accelerator pedal (), and the gear action should be accurate and neat. （ B ）
A. Hurry and slow down
B. Steady and fast release
C. Steady and slow release
27. [Multiple Choice] When the clutch pedal is slowly lifted, the pressure plate gradually compresses the friction plate under the action of the compression spring, and the transmitted torque is gradually (). （ B ）
A. Decrease
B. Enlargement
C. No change
28. What is the part that [Multiple Choice] points to?
（ B ）
A. Hoisting cylinder
B. Chain
C. Sprockets
29. [Multiple choice question] Li drove a 3T forklift to the warehouse for operation, and immediately took emergency braking because someone suddenly crossed the passage during the drive. In a hurry, the accelerator pedal was pressed as the brake pedal, and the forklift continued to move forward and knocked down the pedestrian, causing serious injuries. Analysis of the cause of the accident: () ( C )
A. Illegal operation
B. Speeding
C. Operation error
30. [Multiple Choice] The diesel engine enters the cylinder from the intake valve (). （ C ）
A. Combustible mixture
B. Atomized diesel
C. Pure air
31. [Multiple Choice] The diesel engine has a high compression ratio, high thermal efficiency, low fuel consumption rate, and low diesel price, so the fuel economy performance of the diesel engine is higher than that of the gasoline engine. （ A ）
A、好
B、差
C. Same
32. [Multiple choice question] When the viscosity of diesel fuel is high, the flow resistance is large, and the atomization is poor, resulting in incomplete combustion, black smoke from the exhaust pipe, and fuel consumption (). （ B ）
A. Reduction
B. Increase
C. No change
33. [Multiple Choice] Choose the right viewpoint based on the following phenomena?
（ D ）
A. The car needs to open the door manually when entering the garage
B. The vehicle needs to be stopped for maintenance
C. During maintenance, the fork teeth need to be lowered to the ground
D. It is strictly forbidden for the driver to leave when the goods are suspended
34. [Multiple choice question] The high-temperature performance of grease refers to the adhesion performance of grease at high temperature; Evaluation, safety production mock test is a good point, the indicators are: dropping point and (). （ A ）
A. Evaporation
B. Strength limit
C. Low temperature torque
35. [Multiple Choice] The hydraulic system is a transmission device that uses the pressure energy of the liquid in the container to transmit energy or power. （ B ）
A. Open
B. Sealed
C. It can be closed and opened
36. [Multiple choice question] The adjusted working pressure of the overflow safety valve generally does not exceed the rated working pressure of the system (), and shall not exceed the maximum allowable working pressure of the oil pump. （ B ）
A、100%
B、125%
C、155%
37. [Multiple choice question] The motor vehicle with the best environmental protection characteristics is (). （ B ）
A. Internal combustion vehicles
B. Electric vehicles
38. [Multiple Choice] The friction torque of the clutch should be the maximum torque of the engine. （ A ）
A. Greater than
B. Less than
C, equals
39. [Multiple Choice] Under the specified conditions, the temperature at which diesel fuel is cooled to a foggy or turbid condition due to the appearance of wax crystals is called: diesel (). （ B ）
A. Freezing point
B. Cloud point
C. Cold filter point
40. [Multiple Choice] Forklifts with small lifting heights, the higher frequency of rollover accidents are: (). （ A ）
A. Empty car
B. Heavy truck
C. It's hard to be sure
41. [Multiple choice question] Vehicles (), unsafe road sections such as dense crowds, narrow roads, poor sight distances, and large slopes should be avoided. （ C ）
A. Fast speed
B. Slow speed
C. Large flow rate
D. Ultra-wide
42. [Multiple choice question] The maintenance of vehicles should implement the principle of (). （ B ）
A. Repair first, timely maintenance
B. Prevention first, mandatory maintenance
C. Repair with failure and safe operation
43. [Multiple choice question] When there is an obstacle on one side of the road, the opposite side shall not be parked within () m at both ends of the section equal to the length of the obstacle. （ C ）
A、5
B、15
C、20
44. [Multiple choice question] The horizontal distance from the center of gravity of the rated lifting capacity of the goods to the vertical front surface of the fork is called the forklift's (). （ B ）
A. Load center of gravity
B. Load center distance
C. Load size
45. [Multiple choice question] The function of the drive axle is (). （ C ）
A. It plays the role of driving the engine speed and changing the torque of the drive train
B. Easy shifting, no abnormal noise, and light steering
C. Support the frame, bear the main load of the wheel, and bear the reaction force of the wheel transmission when driving
46. [True or False] The "Special Equipment Safety Law of the People's Republic of China" stipulates that special equipment refers to boilers, pressure vessels, and pressure pipelines. （）（ × ）
47. [True or False] The "Special Equipment Safety Law of the People's Republic of China" stipulates that special equipment operators shall immediately report to the special equipment safety management personnel if they find potential accidents or other unsafe factors during operation. （）（ × ）
48. [True or False] The "Special Equipment Safety Law of the People's Republic of China" stipulates that special equipment includes its attached safety accessories and safety protection devices. （）（ √ ）
49. [True or False] The "Regulations for the Safety and Technical Supervision of Special Motor Vehicles in the Field (Factory)" stipulates that the user unit can determine the cycle and content of the daily maintenance, self-inspection and comprehensive inspection of the field vehicle according to the heavy use of the field vehicle and the environmental conditions, but it shall not be higher than this regulation. （ × ）
50. [True or False] According to the "Regulations for the Safety and Technical Supervision of Special Motor Vehicles in the Field (Factory)", repair refers to the replacement or maintenance of one of the power units, transmission devices, gantry structures, frame structures, and body metal structures of the original field vehicles, but does not change the original main parameters of the field vehicles. （ √ ）
51. [True or False] The "Regulations for the Safety and Technical Supervision of Special Motor Vehicles in the Field (Factory)" stipulates that the same set of devices can be used for the driving brake and parking brake control devices of forklifts. （ × ）
52. [True or False] The "Regulations for the Safety and Technical Supervision of Special Motor Vehicles in the Field (Factory)" stipulates that the road surface of the field vehicle should be flat and hard; When there are special road conditions such as steep slopes, long slopes, sharp bends, narrow roads, and deep ditches in the driving route, protective facilities, warning signs and speed limit reminders shall be set up. （ √ ）
53. [True or False] The "Regulations for the Safety and Technical Supervision of Special Motor Vehicles in the Field (Factory)" stipulates that the position of the driver of the ride-on forklift "safety production simulation test is one-pointed" can not be equipped with protective restraint devices such as seat belts. （ × ）
54. [True or False] According to the "Regulations for the Safety and Technical Supervision of Special Motor Vehicles in the Field (Factory)", the forklift with hydraulic transmission does not necessarily have the function of fretting motion. （ × ）
55. [True or False] The "Rules for the Management of the Use of Special Equipment" stipulates that the special equipment safety supervision department is responsible for handling the registration of the use of special equipment in accordance with the statutory duties and the requirements of these rules, except for the special equipment that is not required to be registered in these rules and other special equipment safety technical specifications. （ √ ）
56. [True or False] The "Rules for the Administration of the Use of Special Equipment" stipulates that the use of vehicle gas cylinders shall be registered in the unit of the vehicle. （ √ ）
57. [True or False] The "Regulations on the Safety Supervision of Special Equipment" stipulates that special equipment includes its attached safety accessories and safety protection devices. （）（ √ ）
58. [True or False] Do not mix engine oils produced by different specifications and manufacturers. Because different engine oil additives have different compositions, they are easy to form precipitates when mixed together, which is not good for engine lubrication. （）（ √ ）
59. [True or False] It is strictly forbidden to use braking inertia to slip away items during forklift operation. （）（ √ ）
60. [True or False] In order to improve work efficiency, forklift drivers can use braking inertia to slip away items. （ × ）
61. [True or False] Carbon dioxide fire extinguishers are suitable for extinguishing initial fires of petroleum and its products, combustible gases and electrical equipment. （）（ √ ）
62. [True or False] As a driver of a field car, you only need to manage your own field car, and you do not need to understand the new technology, new products, and new development direction of the current field car. （）（ × ）
63. [True or False] After the shutdown, if the lifting operation device is needed for warranty operation, the device must be firmly fixed. （ √ ）
64. [True or False] The good braking effect mainly depends on the size of the braking force on the road surface, and the safety of the production The mock test is easy to understand. （ √ ）
65. [True or False] Motor vehicles driving in the factory must keep a certain safety distance from the vehicles in front. （）（ √ ）
66. [True or False] The function of the speed limit valve of the forklift is mainly to limit the speed of the forklift to ensure safety. （）（ × ）
67. [True or False] Under normal circumstances, the forklift can carry 1 person to drive. （）（ × ）
68. [True or False] The bolts and nuts of the hinge pins of the inclined cylinders, masts and forks of forklifts are allowed to be loosened. （）（ × ）
69. [True or False] The lights and horns of the forklift do not affect the driving of the vehicle, and they can not be repaired after damage. （ × ）
70. [True or False] As long as the battery vehicle is running normally, there is no need to check whether the wires of each part are worn or short or open. （）（ × ）
71. [True or False] When the driver operates the forklift to carry goods with a high height or multiple stacked goods, he should use the mast tilt backward to stabilize the load. （）（ √ ）
72. [True or False] Compared with counterbalanced forklifts, reach trucks have the characteristics of high operation efficiency and good passability. （）（ × ）
73. [True or False] In the process of transportation in the factory, due to the short freight distance, the goods may not be fixed or bundled. （）（ × ）
74. [True or False] When there is no obstacle, the speed of reversing should be faster so as not to obstruct traffic. （）（ × ）
75. [True or False] The field car has been in a state of sick operation, which can easily lead to the gradual decline of its performance, the gradual accumulation of problems, and the increasing number of potential safety hazards. （）（ √ ）
76. [True or False] Vehicles are allowed to park diagonally on the ramp. （）（ × ）
77. [True or False] When the field car is driving on a slippery road, the driver should hold the direction tightly, which way the rear of the car slides, which way to hit, and slam the direction back or press the brake pedal. （）（ × ）
78. [True or False] The goods loaded by the yard car should not exceed its specified carrying capacity. （）（ √ ）
79. [True or False] Under normal circumstances, special motor vehicles in the field (factory) can be mixed with people and goods. （）（ × ）
80. [True or False] For mechanically driven field vehicles, the driver should press the clutch pedal before starting to reduce the load on the starting engine. （）（ √ ）
81. [True or False] A small amount of alcohol can improve the driver's reaction sensitivity, so a small amount of alcohol can improve the driver's driving safety. （）（ × ）
82. [True or False] Outdoor work should be prohibited if the visibility is within 5m in bad weather. （）（ √ ）
83. [True or False] The so-called engine "boiling" refers to the boiling phenomenon caused by the coolant temperature exceeding the specified value. （）（ √ ）
84. [True or False] If the oil pump does not work, it may cause the oil pressure to be abnormal. （）（ × ）
85. [True or False] As long as the oil circuit of the diesel engine is normal, it can work normally. （）（ × ）
86. [True or False] When testing the battery electrolyte, the "safety production mock test is easy" can be illuminated with an open flame. （）（ × ）
87. [True or False] Electric field vehicles generally provide electrical energy by a battery pack, and the motor converts mechanical energy into electrical energy. （）（ × ）
88. [True or False] During the period when the safety production license of a construction enterprise is suspended, it can still contract new projects in areas other than the province where the certificate issuing authority is located. （ × ）
89. [True or False] The amount of impurities in the condensate is mainly determined by the quality and leakage of the cooling water leaked into the condensate. （）（ √ ）
90. [True or False] The clutch pressure plate spring has nothing to do with clutch slippage. （）（ × ）
91. [True or False] After adjustment, the rearview mirrors on both sides: From the rearview mirror, you can see two-thirds of the sky and one-third of the ground. （ × ）
92. [True or False] The hollow shaft of the vehicle transmission shaft is only used to save materials. （）（ × ）
93. [True or False] When the vehicle is filled with fuel, the staff must wear neat work clothes and gloves, and fireworks are prohibited around. （）（ √ ）
94. [True or False] The technical condition of the vehicle directly affects the safety of the vehicle. （）（ √ ）
95. [True or False] When the vehicle is overhauled, it is strictly forbidden to put all kinds of containers containing gasoline into the cab. （）（ √ ）
96. [True or False] Before the vehicle starts, observe the surroundings and confirm that there are no obstacles that hinder driving safety, first honk the horn and then start. （）（ √ ）
97. [True or False] Vehicles should choose a wide and straight road, good line of sight, and barrier-free on the side of the road, and should be carried out when the traffic rules permit. （）（ √ ）
98. [True or False] The faster the speed of the vehicle when turning, the greater the centrifugal force. （）（ √ ）
99. [True or False] Among the road traffic signs, only the indication signs belong to the main signs, and the others belong to the auxiliary signs. （）（ × ）
100. [True or False] () The Special Equipment Safety Law of the People's Republic of China was promulgated on June 29, 2013 and came into force on January 1, 2014. （ √ ）
Support accurate N1 forklift driver test questions in all regions of the country, and support safety qualification certificates, special operation certificates, vocational skills appraisal and other types of work question bank exercises.