The mold temperature machine is composed of a water tank, a heating and cooling system, a power transmission system, a liquid level control system, a temperature sensor, an injection port and other devices. Under normal circumstances, the arrival in the power transmission system makes the hot fluid reach the mold from the water tank equipped with a built-in heater and cooler, and then return to the water tank from the mold, and the temperature sensor measures the temperature of the hot fluid and transmits the data to the controller of the control part; The controller regulates the temperature of the hot fluid, and thus indirectly regulates the humidity of the mold. If, in production, the temperature of the mold exceeds the set value of the controller, the controller will open the solenoid valve and connect the water inlet pipe until the temperature of the hot flow liquid, that is, the temperature of the mold, returns to the set value. If the mold base temperature falls below the set point, the controller turns on the heater.
Nanjing Xingde mold temperature machine for all walks of life, complete models of chillers, explosion-proof, waterproof and dustproof support non-standard customization, imported brand accessories, quality assurance, rich cases, free program consultation, technical door-to-door service, we are attentive, you are worry-free.