The working principle of an air-cooled mold temperature controller is mainly dependent on the heat exchange performance of the air. When heating is required, the air is heated to the set temperature through an electric heater or other heat source, and then the hot air is blown to the mold or other temperature-controlled objects through a fan to achieve the purpose of heating. When cooling is required, the heat on the surface of the mold is taken away by introducing cold air from the outside or using other cooling methods to achieve cooling.
Nanjing Xingde solves the problems of long delivery cycle and slow response, solves the problems of untimely after-sales, non-door-to-door after-sales, and high costs, and solves the problems of low work efficiency, uncontrollable temperature and high energy consumption of your equipment.