The burr on the edge of aluminum alloy parts, about 0.5mm, is that there is a clamping line for a week, which needs to be removed and installed on the robotic arm, what is a good cost-saving solution? If you want to remove it, you can use the cost-effective RBZ floating reciprocating pneumatic file.
RBZ reciprocating pneumatic file, telescopic range: 10mm, frequency: 90000bpm-1, can clamp 5mm round file, flat file, can be selected according to aluminum alloy burr, floating to give the file buoyancy force, flexible deburring, file with grinding effect.
Aluminum alloy slight small burr, cost-effective solution, the use of RBZ floating reciprocating pneumatic file, the overall cost is reduced, and the weight is light, the diameter is 40mm, and it can be installed on a light robot, which can be flexibly deburred. Of course, for large burrs, it is still necessary to remove the floating spindle with high torque.