laitimes

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

author:Garfield's Storybook

Lead

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds,

And if you don't step on it, then the high-speed rail will be uncontrolled, and there will even be major accidents.

Because this "pedal" is the key used to control high-speed rail,

If you don't step on it, then you won't be able to maintain the speed and direction of the high-speed rail.

As a result, high-speed rail will deviate from the track intentionally or unintentionally, causing danger.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

Moreover, this pedal also needs to be stepped on every 30 seconds by the high-speed rail driver.

Just to avoid falling asleep or being distracted, it will have any impact on the control of the high-speed rail.

Special control pedals for high-speed rail.

What kind of magic does this pedal have?

put the control of high-speed rail in the hands of the driver,

Rather than handing over control of high-speed rail to a system.

In this way, not only is the security problem relatively large, but even if there is a problem,

If the system can't solve it immediately, there is a risk that an accident may arise as a result.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

Therefore, in order to better let the high-speed rail driver control the direction and speed of the high-speed rail,

That's why we designed such a pedal.

High-speed rail is controlled by the driver stepping on the pedal,

Once the high-speed rail driver does not step on this pedal,

Then the system will automatically stop the high-speed rail at the nearest station.

Rather than continuing to be controlled by high-speed rail drivers.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

So if something happens to the high-speed rail driver, he can't step on this pedal.

Then there will be a situation where high-speed rail is out of control.

Because of this pedal, the high-speed rail driver will not be too distracted,

There will be no falling asleep, so passengers can take the high-speed rail with more peace of mind.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

But if you're flying an airplane, then there's going to be an autopilot system.

So the system of the aircraft will be a little more robust.

So the safety level of the aircraft is a little higher than that of the high-speed rail.

However, the high-speed rail system is still very safe.

The pedal of the high-speed rail.

The pedal is an important control device for high-speed rail.

As long as the high-speed rail driver steps on it, then the high-speed rail can move forward.

And all the operations are done by the driver,

And the system is only an auxiliary role, and will not dominate the direction and speed of high-speed rail.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

And the pedal also has the function of preventing the driver from falling asleep and preventing the driver from being distracted.

If the high-speed rail driver does not step on this pedal, then the system will automatically emergency brake.

Then it automatically controls the high-speed rail and stops it at the nearest station.

Regardless of whether the high-speed rail driver is intentional or unaware, then the system will automatically control the high-speed rail.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

But this pedal is still very safe,

Because with it, then the safety of high-speed rail is higher,

And it also takes some of the pressure off the system and the driver.

The design of the pedal is also very large to avoid or reduce the occurrence of accidents.

But there are still some people who don't support it, and they think it's a humiliation for high-speed rail drivers.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

But the high-speed rail driver thinks it's a very good design,

There is nothing to dispute, since such a design can ensure the safety of high-speed rail,

Then it's good, it's very good anyway, and it's not self-defeating.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

So why can't this pedal be pressed for more than 30 seconds,

If you pedaled for more than 30 seconds, then what would happen, and whether a high-speed rail driver had ever experienced such a process.

High-speed rail drivers cannot pedal for more than 30 seconds.

In fact, this 30 seconds is not fixed,

Rather, it is formulated by the instructor according to the actual situation.

Most of the high-speed rail lines are very flat.

And there will be no curves, as long as the high-speed rail driver is familiar with the line,

Then it is very reassuring to drive.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

But there are some complicated routes,

There will be a lot of curves, and the route is very unpredictable.

High-speed rail drivers need to be doubly concerned.

There can be no slackness at all, but relatively speaking, high-speed rail drivers are more difficult.

And the high-speed rail system is also relatively loose.

When the line is complex, it is necessary to approximate the behavior of high-speed rail.

Then it will be possible to affect the speed and direction of high-speed rail.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

So the system will be controlled by high-speed rail.

So in order to avoid intentional or unintentional distraction, there is this "pedal".

But this pedal is designed by the system of high-speed rail,

The older generation of railroad people is also very hard,

Every once in a while, you need to control the speed direction of the high-speed rail.

Not only is this hard, but it's also distracting.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

So engineers in order to reduce their burden,

But it is not possible to relax their attention, so such a "pedal" is arranged for them.

Logistics support for high-speed rail.

In this way, not only does it reduce their burden,

It can also improve safety, and this pedal is still proposed by the old railway personnel,

But there are some people who have a skewed view and think that they think the guidance of the older generation of railroad workers is wrong.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

However, the development of high-speed rail still depends on logistics support.

Without logistical support, no matter how good the high-speed rail driver is, he will not be able to drive the high-speed rail well.

There can even be major accidents.

Without logistical support, it will be very tiring, and high-speed rail will also have to develop, so it is necessary to develop a personnel system.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

With a basic personnel system, so that talents can have sustainable development,

With the right high-speed rail track and personnel cooperation,

In this way, we can drive a safe and reliable high-speed railway.

In order to allow passengers to take the high-speed rail more securely.

Therefore, the older generation of railway personnel has outstanding features.

Epilogue.

The high-speed rail system as an intelligent system,

has a high position,

And the driver of the high-speed rail is the master of the high-speed rail,

The high-speed rail is also opened, so it is very good.

Why do high-speed rail drivers have to step on the "pedal" every 30 seconds? What happens if you don't step on it?

High-speed rail to the extreme, is already remarkable,

It's better to do it again, so you don't need to stress too much.

Everyone is very familiar with high-speed rail, and it is also very convenient to take high-speed rail.

It can well drive the development of the economy.

Read on