Configure VNC Server on CentOS 7 / RHEL 7

The following simple guide help you to setup the VNC server on RHEL 7/CentOS 7 machines, VNC help to share the desktop with the other machines which has a client installed. VNC server and client are not installed by default, you need to setup the vnc server manually.

Before installing the VNC server, let us install Gnome desktop.

[root@server ~]# yum groupinstall "GNOME Desktop"

Install the tigervnc server and X11 fonts.

[root@server ~]# yum install tigervnc-server xorg-x11-fonts-Type1

Copy the VNC server configuration file to /etc/systemd/system/ for configuring the system service. While copying, you can mention which port it should listen. By default VNC server listens on 5900, but if you setup port-offset for VNC; we can run a service on a sub-port of the default port 5900. For example, if we mention port 5, it will be accessible on 5905.  You can connect the VNC server by specifying ipaddress:sub-port (192.168.2.109:5 or 192.168.2.109:5905)

[root@server ~]# cp /lib/systemd/system/[email protected] /etc/systemd/system/vncserver@:5.service

Edit the copied file.

[root@server ~]# vi /etc/systemd/system/vncserver@:5.service

At the end of file, you will find the lines like below.

[Unit]

Description=Remote desktop service (VNC)

After=syslog.target network.target[Service]

Type=forking

# Clean any existing files in /tmp/.X11-unix environment

ExecStartPre=/bin/sh -c ‘/usr/bin/vncserver -kill %i > /dev/null 2>&1 || :’

ExecStart=/sbin/runuser -l <USER> -c “/usr/bin/vncserver %i”

PIDFile=/home/<USER>/.vnc/%H%i.pid

ExecStop=/bin/sh -c ‘/usr/bin/vncserver -kill %i > /dev/null 2>&1 || :'[Install]

WantedBy=multi-user.target

Replace <USER> with your real user, in my case i replaced with user called “raj” with the screen size.

ExecStart=/sbin/runuser -l raj -c “/usr/bin/vncserver %i -geometry 1280×1024″

PIDFile=/home/raj/.vnc/%H%i.pid

Add firewall rules to allow the VNC connection, the following rule is set as per the port-offset mentioned in the previous step.

[root@server ~]# firewall-cmd --permanent --zone=public --add-port=5905/tcp [root@server ~]# firewall-cmd --reload

Start VNC server after switching to raj.

[raj@server ~]$ vncserver

Set the password.

You will require a password to access your desktops.

Password:

Verify:

xauth:  file /home/raj/.Xauthority does not exist

New ‘localhost.localdomain:1 (raj)’ desktop is server.itzgeek.com:1

Creating default startup script /home/raj/.vnc/xstartup

Starting applications specified in /home/raj/.vnc/xstartup

Log file is /home/raj/.vnc/server.itzgeek.com:1.log

Reload the systemctl daemon as root

systemctl daemon-reload

Start the VNC service as root.

systemctl start vncserver@:5.service

Enable it on system startup as root.

systemctl enable vncserver@:5.service

Take remote desktop.

ipaddress:5905 or ipaddress:5

CentOS 7 – VNC Connection

You will be asked to enter the password, enter the password that you have created earlier.

CentOS 7 – VNC Authendication

Now you will get the vnc desktop session.