As national regulations become more and more stringent on the governance of the concrete transportation industry, local governments have accelerated the elimination of traditional mixer trucks and promoted the application of green, safe and low-carbon mixer trucks has become the common responsibility, goal and pursuit of the whole industry. With the advantages of green environmental protection, strong power, long battery life, and intelligent safety, the M7E pure electric mixer truck has won the trust of users, and the market recognition and product reputation have been continuously improved.
Powerful, reliable and energy-saving
The reliability and durability of commercial concrete transportation vehicles have always been the focus of customers' attention. When purchasing electric mixer trucks, these two points are the pain points that commercial concrete enterprises are worried about. The M7E pure electric mixer truck is equipped with a large-capacity power battery pack of a well-known domestic brand, which has the advantages of high reliability and durability. At the same time, the motor with high-speed flat wire motor technology has higher motor efficiency. The peak output is 410 kW and the maximum torque is 2,500 Nm. Let the M7E pure electric mixer truck drive worry-free, not afraid of most road conditions.
In the slope scenario, the M7E pure electric mixer truck is matched with high-power dual motors and 7-speed EMT gearbox, which starts quickly and realizes uninterrupted power through multi-power source alternation, thus solving the problem that the vehicle cannot automatically shift gears in complex road conditions, and ensuring the safety of the vehicle for emergency braking and driving on slopes. At the same time, the gearbox adopts a drum shift actuator, which solidifies the cooperative control strategy in the hardware, which has accurate cooperative action, fast control response, and ensures smooth shift and high reliability.
In addition to reliability, the M7E electric mixer truck is also very energy-efficient. Compared with the traditional electric AMT system, the multi-power source system equipped with the M7E pure electric mixer truck can realize multiple modes such as single motor working alone and dual motors working together, and the load rate of a single motor can be increased by 1 time in low power demand scenarios (flat road no load), and the power consumption can be reduced by about 7%.
At the same time, the power uninterrupted technology is adopted, which can realize free gear shift on slopes, and compared with the locked operation of AMT, it can fully realize the efficient regional operation of the motor by using gear shifting, and the comprehensive power consumption is lower.
Safer, smarter
Mixer trucks have very high requirements for vehicle safety, especially commercial concrete for road driving and transportation, because this can ensure efficient operation. The M7E pure electric mixer truck is equipped with an intelligent network monitoring system, with blind spot detection, cylinder forward and reverse sensor, reversing camera, front view camera, multimedia screen, DSM fatigue monitoring camera, blind spot radar + sound and light alarm, left and right rearview mirror integrated blind spot camera and other intelligent configurations, effectively reducing the frequency of accidents, not only to ensure driving safety, but also to ensure that the transported concrete has ultra-high quality to meet the efficient operation.
Through this system, logistics enterprises can carry out real-time fleet management, such as vehicle online situation list, vehicle addition, chassis code, SIM card information management, etc., real-time monitoring of vehicle abnormalities, predictive fault prompts, financial control, vehicle operation analysis and other management, so as to achieve comprehensive safety of people, vehicles and goods.
Efficient operation and worry-free users
For mixer truck users, it is very important to have an efficient and reliable bodywork system in case of a failure of the bodyload system. The cylinder and mixing blades of the M7E pure electric mixer truck are made of high-strength fine-grained alloy steel, non-equigonal logarithmic spiral blades, coupled with the unique blade opening design, the feeding speed is greater than 3.2m³/min, and the discharging speed is greater than 2m³/min, which ensures high efficiency and at the same time, the mixing is more uniform, the residual rate is lower, and the service life is longer. It also has a unique leak-proof device to ensure that the concrete loading capacity meets the customer's needs. At the same time, the drive motor is directly connected to the stirring tank, replacing the crude oil pump + motor scheme, and the energy consumption loss is reduced by 15%. The speed of the tank is constant, which is safer and non-segregated when turning, which greatly improves the transportation quality of concrete.
In order to practice family service, the M7E pure electric mixer truck also creates an "efficient, convenient and professional" full-service solution for customers to fully ensure that users have no worries. Implement the whole process of "7×24×365" full order management, full-time online, to ensure that on call, quickly solve the problems encountered by customers.
With the advantages of high battery life, high energy saving, high reliability and high safety, the M7E pure electric mixer truck has been continuously recognized by green urban construction users. While helping customers create more benefits, we will also promote the green, low-carbon and high-quality development of the commercial concrete industry.