In the whole network cabling project, cabinet cabling is a very particular work. How to make the cabinet wiring neat and beautiful is a big test of the professional skills of our weak current novices.
The importance of the cabinet specification cabling
The cabinet systematically solves the problems of high-density heat dissipation, large number of cable attachment and management, large-capacity power distribution, and full compatibility with rack-mounted equipment from different manufacturers in computer applications, so that the data center can operate in a highly stable environment.
With the vigorous development of the Internet industry and the upgrading of network products such as servers and switches, the cabinets used should accommodate more equipment than before.
If the cable in the cabinet wiring is not well laid and the system is not enough, it will not only lead to damage to the cable or prolong the time of increasing the replacement cable, but also hinder the airflow and cause the equipment to overheat and shut down.
Master these tips to keep your wiring organized, and you can get a promotion and a raise.
Master these tips and get your cabinet wiring organized
1. Ensure that the air conditioning shield of the cabinet is open to avoid overheating of the equipment and causing crashes.
2. Each network cable inside the cabinet should be labeled to avoid unnecessary troubles caused by later maintenance.
3. The switch should be fixed on the top of the cabinet with matching ears to help the network cable move.
4. Paste the asset number of each server, and print out the asset number + barcode together through the label printer, each print two consistent, and paste one on the front and side of the device.
5. Generally, the power line and the network cable are routed from different directions, and each section is tied with a cable tie.
6. The backend of the network cable head connecting the server and the switch should be marked with a cable tie label with the same number, and it should be consistent with the switch port number.
7. When wiring the cabinet, make sure that the power cord plug and the server power connector are fixed with label ties at both ends.
8. The wiring between the cabinet and the cabinet is generally routed from the top direction of the cabinet.
9. If the cabinet is a switch with internal and external networks, try to use two different colors of network cables to distinguish them.
Cabinet wiring is a technical job, and the wiring is done in a regular and orderly manner, which not only brings great convenience to the later maintenance, but also facilitates us to view the inside of the cabinet, and more importantly, allows the equipment to play the highest performance.
What's more, it is difficult for the boss to see such a perfect wiring without giving you a salary increase.
Source@Weak Current Talent Network