In the production of panel furniture, the edge banding process is undoubtedly a crucial part. In the past, most manufacturers used edge banding machines with 2-3 employees to complete this process. However, with the increasing labor costs, more and more manufacturers choose to use edge banding machine rotary lines to reduce labor costs. A set of edge banding machine rotary line can save 800 labor costs in one day, helping furniture factories to achieve real cost reduction and efficiency increase.
So the question is, how to select the rotary line of the edge banding machine? We have summarized three key points for you.
1. The large plate is easily rotated
The design of the No. 2 machine of the rotary line of many edge banding machines is unreasonable, and the matching degree with the No. 1 machine and the No. 3 machine is not good, and it is difficult for the large plate to rotate. Therefore, when selecting the rotary line of the edge banding machine, it should be noted that the conveying equipment that can be easily rotated by large plates should be selected.
2. The rotation of the small plate is smooth
If the speed ratio of the edge banding machine and the No. 1 machine does not match, it is easy to have an unsmooth rotation when the small plate rotates, which affects the work efficiency. Therefore, the rotary line needs to match the corresponding No. 1 machine for different edge banding machines to improve the work efficiency and smoothness of the rotary line.
3. Do not knock the board or touch the board
Due to the unreasonable height design of some rotary lines, the board is not smooth, and it is easy to bump the plate, which affects the yield rate. In order to improve the yield rate, when selecting the rotary line, it is necessary to pay attention to the decreasing height of the three nodes, and add anti-collision wheels at the key rotary nodes to avoid edge damage.
The above is all the content of how to choose the edge banding machine rotary line, I hope it will be helpful to you. If you have any questions about the edge banding machine rotary line, you may wish to leave a message in the comment area.