When it comes to the installation design of steel radiators, this is not just as simple as hanging the radiators on the wall, it can really be described as "three points of equipment, seven points of installation"! Especially in this "seven-point installation", the importance of scheme design accounts for three points, which is enough to see its importance.
1. According to the owner's living habits and room type and other factors, divide the heating area of the house.
2. The installation position of the steel radiator mainly follows the principle of low and not high, and priority under the window.
In general, steel radiators are installed under window sills with low space utilization, which not only facilitates the convection of indoor air, but also heats the cold air coming in through the windows.
3. Try to avoid the heating pipe passing through the living room, if it is really unavoidable, the horizontal pipe can be arranged along the baseboard; The pipes up and down should be arranged in the corners of the wall next to the window, and the curtains should be used to cover them.
4. When the heating pipe needs to pass through the door of the room, it is recommended to go from the door and not slotted from below, so as not to damage the floor.
5. When the heating pipe is arranged in the room, it is recommended to be set on the back of the door, which saves the indoor space and facilitates the living and living.
6. Accessories such as radiator pipes and fixed pipe clamps should be consistent with the color of the wall to reduce the abrupt feeling and not affect the decoration effect in the room.
Imagine if the radiators in your home are not installed properly enough, won't the heating effect of the whole winter be greatly reduced? Moreover, if the radiator is not installed well, it may also affect the aesthetics of the home, making people feel unhappy when they look at it. So, a perfect installation design can really double the heating effect and make your home look neater and more beautiful!
Then, after we install the steel radiator, the acceptance work can not be sloppy! First of all, it is necessary to check whether the radiator and pipe are installed firmly from the appearance, and whether there is any shaking or loosening. Has the tube been corroded? Are there any random buckles or broken wires in the pipe fittings? You have to take a closer look at all of this, after all, safety comes first!
Next, it's time for the suppression test! This is a crucial step, and it must not be missing! The pressure test can check the radiator for water leaks and ensure the safety of the entire heating system. If the suppression test is passed, and there is no leakage, then you can basically rest assured!
And don't forget to check the bleed valve! The air release valve is one of the important components of the radiator, if the air release valve cannot be turned on or is broken, the gas will not be discharged, and the radiator will not be hot. Therefore, when accepting, you must try whether the air release valve is easy to use, and if there is a problem, you must repair it quickly!
In short, the installation design of steel radiators is really important! A good installation design will not only make the heating effect better, but also make the home more beautiful and tidy. Therefore, when you install radiators, you must pay attention to the design!
The above is the relevant content of "Steel Radiator Installation Design Ideas and Acceptance" summarized by the editor of the golden flagship aesthetic radiator, hoping to help everyone's life. If you want to know more about HVAC information, please pay more attention to the golden flagship, and the golden flagship will provide you with more complete, more detailed and updated information. If there are any deficiencies, please feel free to correct and put forward.