What should I do if the screws can't be unscrewed? Teach you a good way, no matter what screws are removed as soon as they are removed.
In the daily maintenance or disassembly work, we often encounter some screws, due to long-term use or external force and slippery silk or slippery buds. This kind of problem made it possible to remove screws that could have been easily removed, even with all our best efforts. But don't be discouraged, today I'm going to introduce you to a simple and practical solution.
First of all, find a section of electrical tape, which usually has strong adhesion and some elasticity. After tearing off a small piece, stick it to the tip of the screwdriver, making sure that the tape fits snugly against the surface of the screwdriver.
Next, slowly insert the taped screwdriver into the screw slot. The tape increases the friction between the screwdriver and the screw, which helps prevent the screwdriver from slipping again while spinning. After a few more rotations, the screws began to bulge gradually, which meant that we were one step closer to a successful removal.
At the same time, we can also find a small wooden stick or toothpick and clamp it between the screw heads. This is done to provide an extra point of support that helps us pull out the screws more easily. Finally, with a single pull, the screws can be easily removed.
Seeing this, do you think this method is both simple and practical? It doesn't require complicated tools or great skill, just a little patience and ingenuity. I hope this article can help you avoid detours and improve your work efficiency when facing similar problems. Of course, if you have other better solutions or suggestions, please leave a message in the comment area to share. Thank you all for your visit and support! If you find this article helpful, don't forget to like and retweet it!