laitimes

The machining center cuts carbon fiber plates, and the 50,000 rpm NAKANISHI high-speed electric spindle can be processed

The machining center machine tool cuts carbon fiber plates, with a thickness of 1mm, and the requirement is that the cutting edge is free of burrs, what processing solutions can be processed? To meet the requirements, the 50,000 rpm NAKANISHI high-speed electric spindle HES can be used, and the spindle runout accuracy is within 1um, which can meet the processing needs.

The machining center cuts carbon fiber plates, and the 50,000 rpm NAKANISHI high-speed electric spindle can be processed

  The carbon fiber plate is relatively thin, the cutting should be smooth, the use of high-speed, high-precision spindle, equipped with a good tool can meet the processing needs. According to the tool holder adapted to the machining center, you can choose a 50,000 rpm increase tool holder, NAKANISHI high-speed electric spindle, and high precision, high speed, smooth incision without burrs.

The machining center cuts carbon fiber plates, and the 50,000 rpm NAKANISHI high-speed electric spindle can be processed
The machining center cuts carbon fiber plates, and the 50,000 rpm NAKANISHI high-speed electric spindle can be processed

  NAKANISHI high-speed spindle HES is mostly used for drilling micro holes, slots, fine milling, high-gloss machining, etc., and BT30, BT40, BT50, HSKA63 tool holders are optional, and 80,000 rpm are optional, so you can choose the right model according to the actual processing situation.

Read on