laitimes

No. 1 in the city! A record high!

recently

Jiangsu Province in 2024

The list of the first (set) major equipment to be identified is publicized

The equipment of 7 enterprises in Wujiang was selected

Ranked first in the city

The number of certifications has reached a record high

No. 1 in the city! A record high!

The selected enterprises in Wujiang are:

↓↓↓

Suzhou Mingzhi Technology Co., Ltd

MLD2000 Super large cold box core shooter

Bozhon Seiko Technology Co., Ltd

L6 is used in the manufacture of blade battery cells

High-speed and high-precision cutting and stacking equipment

Yizumi Precision Machinery (Suzhou) Co., Ltd

UN1600D1M-tHP伺服智能高精密

Parallel four-color large-scale polymer injection molding machine

Suzhou Maiwei Technology Co., Ltd

MV-LH06H 高效双面微晶

HHF VHF PECVD mass production equipment for heterojunction cells

CGN Dasheng Accelerator Technology Co., Ltd

DD2.0/50mA 电离辐射技术

Antibiotic wastewater and bacterial residue treatment equipment

Eastern Superconducting Technology (Suzhou) Co., Ltd

SE-HTSC-DC10kV/6kA

Based on second-generation (YBCO) high-temperature superconducting materials

Superconducting DC transmission cable system equipment

Suzhou Jumaike Intelligent Technology Co., Ltd

JMK-RX-5001 PIM

Ultra-micro integrated inductor intelligent production line

Suzhou Mingzhi Technology Co., Ltd

No. 1 in the city! A record high!

Suzhou Mingzhi Technology Co., Ltd.'s "MLD2000 ultra-large cold box core shooting machine" innovatively applies digital sand shooting technology, achieving a breakthrough in increasing the maximum sand injection volume from 1700L to 2000L; The innovative application of high-dose catalyst equilibrium quantitative technology has achieved a breakthrough in reducing the blowing curing time from 300s to ≤240s. The innovative application of heavy-duty drive technology has achieved a breakthrough in increasing the maximum operating load from 20 tons to 40 tons; The intelligent control technology of large-scale core shooter based on deep learning technology is innovatively applied to realize the informatization and intelligent management of the production system of large-scale core shooter.

Bozhon Seiko Technology Co., Ltd

No. 1 in the city! A record high!

Bozhon Precision Technology Co., Ltd.'s "L6 high-speed and high-precision cutting and stacking equipment applied to blade battery cell manufacturing" has broken through a number of key technologies such as multi-vision fusion calibration, synchronous control of pole piece flying cutting, large-size multi-station high-speed and high-precision pole piece stacking, etc., and the comprehensive technical indicators are at the international advanced level, which can effectively solve the technical bottlenecks such as insufficient precision and efficiency, poor monomer consistency and low yield in the process of blade battery cell slicing and lamination, and promote the production and manufacturing of blade batteries to achieve quality and efficiency improvement.

Yizumi Precision Machinery (Suzhou) Co., Ltd

No. 1 in the city! A record high!

Yizumi Precision Machinery (Suzhou) Co., Ltd.'s "UN1600D1M-tHP Servo Intelligent High-precision Parallel Four-color Large Polymer Injection Molding Machine" is equipped with 4 injection tables, distribution shaft mechanism and adaptive clamping force adjustment system, which can be widely used in automobiles, electronics, medical equipment, daily necessities and other fields. Independently developed the online testing technology of injection molding machine mold, which improved the molding quality of injection molding machine products; At the same time, it is equipped with an intelligent control system based on the cloud platform to realize remote monitoring and intelligent control of the equipment.

Suzhou Maiwei Technology Co., Ltd

No. 1 in the city! A record high!

The MV-LH06H high-efficiency bifacial microcrystalline heterojunction cell VHF VHF PECVD mass production equipment of Suzhou Myway Technology Co., Ltd. adopts advanced VHF-PECVD technology, which can form a microcrystalline silicon film with high conductivity and high light transmittance on the surface of the cell, which can significantly improve the cell efficiency. At the same time, the equipment adopts environmentally friendly low-temperature manufacturing process and silicon wafer thinning technology to reduce the use of raw materials and energy consumption, reduce carbon footprint, and conform to the development trend of green environmental protection.

CGN Dasheng Accelerator Technology Co., Ltd

No. 1 in the city! A record high!

CGN Dasheng Accelerator Technology Co., Ltd.'s "DD2.0/50mA Ionizing Radiation Technology for the Treatment of Antibiotic Wastewater and Bacterial Residue Equipment" has broken through the technical bottlenecks such as the high efficiency of wastewater in antibiotic production wastewater and the application of antibiotic bacterial residue engineering and the difficulty of harmless disposal of bacterial residue, and has the advantages of strong treatment capacity, high treatment efficiency and high degree of equipment automation, and the technical level has reached the international advanced level. The fungus residue after harmless treatment can be composted aerobically to achieve resource utilization.

Eastern Superconducting Technology (Suzhou) Co., Ltd

No. 1 in the city! A record high!

Eastern Superconducting Technology (Suzhou) Co., Ltd.'s "SE-HTSC-DC10kV/6kA Superconducting DC Transmission Cable System Equipment Based on the Second Generation (YBCO) High-temperature Superconducting Materials" is integrated by the superconducting DC cable body, low-temperature Dewar pipe, cable termination, refrigeration system and monitoring system, and is the first 100-meter-level positive and negative coaxial cold-insulated high-temperature superconducting DC cable system in China, which is applied to the first superconducting DC distribution network project for medium and low voltage in China.

Suzhou Jumaike Intelligent Technology Co., Ltd

No. 1 in the city! A record high!

The "JMK-RX-5001 PIM ultra-micro integrated inductor intelligent production line" of Suzhou Jumaike Intelligent Technology Co., Ltd. pioneered the integrated design, which simplifies the cold pressing, winding, powder filling connection, hot pressing, grinding, spraying, paint stripping and other processes in the inductor production process. Compared with the single-axis and double-axis winding methods in the industry, the five-axis winding can be realized at one time, and the inductance defect rate is kept within 3%, which greatly improves the inductor production efficiency.

The first (set) major technical equipment

It is to achieve a major technological breakthrough,

High-end equipment that has not yet achieved market performance

It is to promote the high-end, intelligent,

An important starting point for green development

Wujiang attaches great importance to it

The cultivation of the first (set) major equipment

At present, there are a total of 57 products

Passed the first (set) major equipment certification in Jiangsu Province

The number ranks among the top in Suzhou City

Wujiang will continue to play the role of the main body of enterprise innovation

Encourage major complete sets of equipment and key core components enterprises

The weak links that restrict the development of the industry

Carry out key core technology research

Carry out technological innovation and new product research and development

Accelerate the construction of an independent and controllable advanced manufacturing system

Promote the high-quality development of the manufacturing industry