Insiders tell you that it's not enough to buy wallcoverings just by looking at the color! There is a lot of article on the purchase of wall coverings, and it is necessary to master the tricks and try to avoid overturning after pasting. Carefully organize a detailed lightning protection guide, be sure to read it before buying!
| Material selection
This refers to the adhesive material. The bottom adhesive material should be environmentally friendly and breathable, and there are three kinds of wall cloth bonding materials on the market: cold glue, hot glue and hot melt mesh film. Its superiority ranking: hot melt web film> hot glue > cold glue
✔ Cold glue wallcovering: cold glue is a traditional material of environmentally friendly vegetable glue, generally used glutinous rice glue, on the wall for a long time will appear warping, falling off and other situations. In addition, because the main ingredient of glutinous rice glue is glutinous rice, which contains a large number of nutrients, it is easy to breed microorganisms and mildew.
✔ Hot glue wallcovering: The back of the wallcovering comes with adhesive, no need to glue it during construction, and use a steam iron to glue the wall directly. There are three main advantages: first, the effect is more beautiful after pasting; second, it is more environmentally friendly; Third, it can effectively prevent mildew in the wall covering. However, the hot glue wallcovering with poor quality feels bad, and it is easy to produce glue penetration on the wall, and it is not breathable.
✔ Hot melt mesh wallcovering: The new wallcloth bonding material, different from ordinary hot glue, is a layer of mesh structure, which is generally used for the bonding of high-end cars and suit linings, with better air permeability and more environmental protection. SkyOcean wall cloth is a four-layer structure, of which two layers of adhesive layers are made of hot melt mesh film, which is very soft to the touch, and has stronger air permeability.
| Fabric selection
The wall cloth layer should be selected after three treatments, namely waterproof, oil-proof, and anti-fouling treatment. This is a special process and technique that makes the fabric resistant to water, oil and stain penetration. When you buy it, you can test it with the items around you.
| Color proofreading
The problem of wall cloth color difference is caused by a variety of reasons, and some effective measures can be used to proofread the color when purchasing:
✔ Know the material when choosing: You should understand the natural color difference of the material in advance, so as to reduce many problems in the later stage.
✔ Comparison test: You can use a small sample on the wall to compare and check whether there is a color difference.
✔ Consider light and angles: Observe the color of the wallcovering in different light and angles to ensure the authenticity and consistency of the color.
✔ Choose big brand products: Buy big brand products and reduce the possibility of color difference.
| Construction issues
At present, there are generally three construction methods for wall covering, and the advantages of hot-melt mesh film materials are more obvious.
1. Cold glue paste: liquid glue, after the workers finish the wall, use a roller brush to evenly brush the glue on the wall or wall cloth for pasting, and the wall cloth is easy to penetrate the glue during construction.
2. Hot glue paste: the wall cloth comes with adhesive, and the iron is used to heat the wall cloth when pasting, so that the wallcloth adhesive melts and produces stickiness.
3. Hot melt mesh film paste: environmentally friendly adhesive material, different from ordinary hot glue, it is a layer of mesh structure, breathable and environmentally friendly, convenient construction, ironed on the wall, no odor volatilization, can be pasted on the same day.