此配置可以直接複制粘貼使用
//While you can edit this file, it’s best to put your changes in
//”User/Preferences.sublime-settings”, which overrides the settings in //here.Settings may also be placed in file type specific options files,
//for example, in Packages/Python/Python.sublime-settings for python files.
// 雖然您可以編輯此檔案,但最好将您的更改放在
//User / Preferences.sublime-settings,它将覆寫此處的設定。
//也可以将設定放置在檔案類型特定的選項檔案中,例如,
//在python檔案的Packages / Python / Python.sublime-settings中。
{
//Sets the colors used within the text area
//設定文本區域中使用的顔色
//主題檔案
"color_scheme": "Packages/Color Scheme - Default/Monokai.tmTheme",
// Note that the font_face and font_size are overriden in the platform
// specific settings file, for example, "Preferences (Linux).sublime-settings".
// Because of this, setting them here will have no effect: you must set them
// in your User File Preferences.
//字型樣式、大小
"font_face": "",
"font_size": 10,
// Valid options are "no_bold", "no_italic", "no_antialias", "gray_antialias",
// "subpixel_antialias", "no_round" (OS X only) and "directwrite" (Windows only)
// 字型選項:
//no_bold不顯示粗體字,
//no_italic不顯示斜體字,
//no_antialias和no_antialias關閉反鋸齒
//subpixel_antialias和no_round是OS X系統獨有的
//directwrite是Windows系統獨有的
"font_options": [],
// Characters that are considered to separate words
// 在文字上輕按兩下會全選目前的内容,如果裡面出現以下字元,就會被截斷
"word_separators": "./\\()\"'-:,.;<>[email protected]#$%^&*|+=[]{}`~?",
// Set to false to prevent line numbers being drawn in the gutter
// 是否顯示行号
"line_numbers": true,
// Set to false to hide the gutter altogether
// 是否顯示行号邊欄
"gutter": true,
// Spacing between the gutter and the text
// 行号邊欄和文字的間距
"margin": 4,
// Fold buttons are the triangles shown in the gutter to fold regions of text
// 是否顯示代碼折疊按鈕
"fold_buttons": true,
// Hides the fold buttons unless the mouse is over the gutter
// 不管滑鼠在不在行号邊欄,代碼折疊按鈕一直顯示
"fade_fold_buttons": true,
// Columns in which to display vertical rulers
//列顯示垂直标尺,在中括号裡填入數字,寬度按字元計算
"rulers": [],
// Set to true to turn spell checking on by default
// 是否打開拼寫檢查
"spell_check": false,
// The number of spaces a tab is considered equal to
// Tab鍵制表符寬度
"tab_size": 4,
// Set to true to insert spaces when tab is pressed
// 設為true時,縮進和遇到Tab鍵時使用空格替代
"translate_tabs_to_spaces": false,
// If translate_tabs_to_spaces is true, use_tab_stops will make tab and
// backspace insert/delete up to the next tabstop
// translate_tabs_to_spaces設定為true,Tab和Backspace的删除/插入作用于制表符寬度
// 否則作用于單個空格
"use_tab_stops": true,
// Set to false to disable detection of tabs vs. spaces on load
// false時禁止在載入的時候檢測制表符和空格
"detect_indentation": true,
// Calculates indentation automatically when pressing enter
// 按回車時,自動與制表位對齊
"auto_indent": true,
// Makes auto indent a little smarter, e.g., by indenting the next line
// after an if statement in C. Requires auto_indent to be enabled.
//針對C語言的
"smart_indent": true,
// Adds whitespace up to the first open bracket when indenting. Requires
// auto_indent to be enabled.
// 需要啟用auto_indent,第一次打開括号縮進時插入空格?(沒測試出來效果…)
"indent_to_bracket": false,
// Trims white space added by auto_indent when moving the caret off the
// line.
// 顯示對齊的白線是否根據回車、tab等操作自動填補
"trim_automatic_white_space": true,
// Disables horizontal scrolling if enabled.
// May be set to true, false, or "auto", where it will be disabled for
// source code, and otherwise enabled.
// 是否自動換行,如果選auto,需要加雙引号
"word_wrap": "auto",
// Set to a value other than 0 to force wrapping at that column rather than the
// window width
// 設定視窗内文字區域的寬度
"wrap_width": 0,
// Set to false to prevent word wrapped lines from being indented to the same
// level
// 防止被縮進到同一級的字換行
"indent_subsequent_lines": true,
// Draws text centered in the window rather than left aligned
// 如果沒有定義過,則檔案居中顯示(比如建立的檔案)
"draw_centered": false,
// Controls auto pairing of quotes, brackets etc
// 自動比對引号,括号等
"auto_match_enabled": true,
// Word list to use for spell checking
// 拼寫檢查的單詞清單路徑
"dictionary": "Packages/Language - English/en_US.dic",
// Set to true to draw a border around the visible rectangle on the minimap.
// The color of the border will be determined by the "minimapBorder" key in
// the color scheme
// 代碼地圖的可視區域部分是否加上邊框,邊框的顔色可在配色方案上加入minimapBorder鍵
"draw_minimap_border": false,
// If enabled, will highlight any line with a caret
// 突出顯示目前光标所在的行
"highlight_line": false,
// Valid values are "smooth", "phase", "blink", "wide" and "solid".、
// 設定光标閃動方式
"caret_style": "smooth",
// Set to false to disable underlining the brackets surrounding the caret
// 是否特殊顯示目前光标所在的括号、代碼頭尾閉合标記
"match_brackets": true,
// Set to false if you'd rather only highlight the brackets when the caret is
// next to one
// 設為false時,隻有光标在括号或頭尾閉合标記的兩端時,match_brackets才生效
"match_brackets_content": true,
// Set to false to not highlight square brackets. This only takes effect if
// match_brackets is true
// 是否突出顯示圓括号,match_brackets為true生效
"match_brackets_square": true,
// Set to false to not highlight curly brackets. This only takes effect if
// match_brackets is true
// 是否突出顯示大括号,match_brackets為true生效
"match_brackets_braces": true,
// Set to false to not highlight angle brackets. This only takes effect if
// match_brackets is true
// 是否突出顯示尖括号,match_brackets為true生效
"match_brackets_angle": false,
// Enable visualization of the matching tag in HTML and XML
// html和xml下突出顯示光标所在标簽的兩端,影響HTML、XML、CSS等
"match_tags": true,
// Highlights other occurrences of the currently selected text
// 全文突出顯示和目前選中字元相同的字元
"match_selection": true,
// Additional spacing at the top of each line, in pixels
// 設定每一行到頂部,以像素為機關的間距,效果相當于行距
"line_padding_top": 0,
// Additional spacing at the bottom of each line, in pixels
// 設定每一行到底部,以像素為機關的間距,效果相當于行距
"line_padding_bottom": 0,
// Set to false to disable scrolling past the end of the buffer.
// On OS X, this value is overridden in the platform specific settings, so
// you'll need to place this line in your user settings to override it.
// 設定為false時,滾動到文本的最下方時,沒有緩沖區
"scroll_past_end": true,
// This controls what happens when pressing up or down when on the first
// or last line.
// On OS X, this value is overridden in the platform specific settings, so
// you'll need to place this line in your user settings to override it.
// 控制向上或向下到第一行或最後一行時發生什麼(沒明白也沒試出來)
"move_to_limit_on_up_down": false,
// Set to "none" to turn off drawing white space, "selection" to draw only the
// white space within the selection, and "all" to draw all white space
// 按space或tab時,實際會産生白色的點(一個空格一個點)或白色的橫線(tab_size設定的制表符的寬度),選中狀态下才能看到
// 設定為none時,什麼情況下都不顯示這些點和線
// 設定為selection時,隻顯示選中狀态下的點和線
// 設定為all時,則一直顯示
"draw_white_space": "selection",
// Set to false to turn off the indentation guides.
// The color and width of the indent guides may be customized by editing
// the corresponding .tmTheme file, and specifying the colors "guide",
// "activeGuide" and "stackGuide"
// 制表位的對齊白線是否顯示,顔色可在主題檔案裡設定(guide,activeGuide,stackGuide)
"draw_indent_guides": true,
// Controls how the indent guides are drawn, valid options are
// "draw_normal" and "draw_active". draw_active will draw the indent
// guides containing the caret in a different color.
// 制表位的對齊白線,draw_normal為一直顯示,draw_active為隻顯示目前光标所在的代碼控制域
"indent_guide_options": ["draw_normal"],
// Set to true to removing trailing white space on save
// 為true時,儲存檔案時會删除每行結束後多餘的空格
"trim_trailing_white_space_on_save": false,
// Set to true to ensure the last line of the file ends in a newline
// character when saving
// 為true時,儲存檔案時光标會在檔案的最後向下換一行
"ensure_newline_at_eof_on_save": false,
// Set to true to automatically save files when switching to a different file
// or application
// 切換到其它檔案标簽或點選其它非本軟體區域,檔案自動儲存
"save_on_focus_lost": false,
// The encoding to use when the encoding can't be determined automatically.
// ASCII, UTF-8 and UTF-16 encodings will be automatically detected.
// 編碼時不能自動檢測編碼時,将自動檢測ASCII, UTF-8 和 UTF-16
"fallback_encoding": "Western (Windows 1252)",
// Encoding used when saving new files, and files opened with an undefined
// encoding (e.g., plain ascii files). If a file is opened with a specific
// encoding (either detected or given explicitly), this setting will be
// ignored, and the file will be saved with the encoding it was opened
// with.
// 預設編碼格式
"default_encoding": "UTF-8",
// Files containing null bytes are opened as hexadecimal by default
// 包含空位元組的檔案被打開預設為十六進制
"enable_hexadecimal_encoding": true,
// Determines what character(s) are used to terminate each line in new files.
// Valid values are 'system' (whatever the OS uses), 'windows' (CRLF) and
// 'unix' (LF only).
// 每一行結束的時候用什麼字元做終止符
"default_line_ending": "system",
// When enabled, pressing tab will insert the best matching completion.
// When disabled, tab will only trigger snippets or insert a tab.
// Shift+tab can be used to insert an explicit tab when tab_completion is
// enabled.
// 設定為enabled時,在一個字元串間按Tab将插入一個制表符
// 設定為true時,按Tab會根據前後環境進行代碼自動比對填補
"tab_completion": true,
// Enable auto complete to be triggered automatically when typing.
// 代碼提示
"auto_complete": true,
// The maximum file size where auto complete will be automatically triggered.
// 代碼提示的大小限制
"auto_complete_size_limit": 4194304,
// The delay, in ms, before the auto complete window is shown after typing
// 代碼提示延遲顯示
"auto_complete_delay": 50,
// Controls what scopes auto complete will be triggered in
// 代碼提示的控制範圍
"auto_complete_selector": "source - comment",
// Additional situations to trigger auto complete
// 觸發代碼提示的其他情況
"auto_complete_triggers": [ {"selector": "text.html", "characters": "<"} ],
// By default, auto complete will commit the current completion on enter.
// This setting can be used to make it complete on tab instead.
// Completing on tab is generally a superior option, as it removes
// ambiguity between committing the completion and inserting a newline.
// 設為false時,選擇提示的代碼按回車或點選可以輸出出來,但選擇true時不會輸出而是直接換行
"auto_complete_commit_on_tab": false,
// Controls if auto complete is shown when snippet fields are active.
// Only relevant if auto_complete_commit_on_tab is true.
// auto_complete_commit_on_tab必須為true,控制代碼提示的活躍度
"auto_complete_with_fields": false,
// By default, shift+tab will only unindent if the selection spans
// multiple lines. When pressing shift+tab at other times, it'll insert a
// tab character - this allows tabs to be inserted when tab_completion is
// enabled. Set this to true to make shift+tab always unindent, instead of
// inserting tabs.
// 設定為false,使用Shift + tab總是插入制表符
"shift_tab_unindent": false,
// If true, the copy and cut commands will operate on the current line
// when the selection is empty, rather than doing nothing.
//複制與剪切的
"copy_with_empty_selection": true,
// If true, the selected text will be copied into the find panel when it's
// shown.
// On OS X, this value is overridden in the platform specific settings, so
// you'll need to place this line in your user settings to override it.
// 選中的文本按Ctrl + f時,自動複制到查找面闆的文本框裡
"find_selected_text": true,
// When drag_text is enabled, clicking on selected text will begin a
// drag-drop operation
//拖動文本
"drag_text": true,
//
// User Interface Settings
//
// The theme controls the look of Sublime Text's UI (buttons, tabs, scroll bars, etc)
//主題
"theme": "Default.sublime-theme",
// Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to
// scroll slower, or set to larger than 1 to scroll faster
// 滾動的速度
"scroll_speed": 1.0,
// Controls side bar animation when expanding or collapsing folders
// 左邊邊欄檔案夾動畫
"tree_animation_enabled": true,
// Makes tabs with modified files more visible
//高亮未儲存檔案
"highlight_modified_tabs": false,
// 标簽頁的關閉按鈕
"show_tab_close_buttons": true,
// Show folders in the side bar in bold
//在側邊欄顯示檔案夾
"bold_folder_labels": false,
// OS X 10.7 only: Set to true to disable Lion style full screen support.
// Sublime Text must be restarted for this to take effect.
//開啟全屏,針對 OS X 10.7
"use_simple_full_screen": false,
// OS X only. Valid values are true, false, and "auto". Auto will enable
// the setting when running on a screen 2880 pixels or wider (i.e., a
// Retina display). When this setting is enabled, OpenGL is used to
// accelerate drawing. Sublime Text must be restarted for changes to take
// effect.
//針對OS X,使用OpenGL畫圖,需重新開機
"gpu_window_buffer": "auto",
// Valid values are "system", "enabled" and "disabled"
//延遲滾動條
"overlay_scroll_bars": "system",
//
// Application Behavior Settings
//
// Exiting the application with hot_exit enabled will cause it to close
// immediately without prompting. Unsaved modifications and open files will
// be preserved and restored when next starting.
//
// Closing a window with an associated project will also close the window
// without prompting, preserving unsaved changes in the workspace file
// alongside the project.
// 熱退出功能!退出時不會提示是否儲存檔案,而是直接退出
"hot_exit": true,
// remember_open_files makes the application start up with the last set of
// open files. Changing this to false will have no effect if hot_exit is
// true
//記憶之前打開的檔案
"remember_open_files": true,
// OS X only: When files are opened from finder, or by dragging onto the
// dock icon, this controls if a new window is created or not.
//始終在新視窗打開檔案,針對OS X
"open_files_in_new_window": true,
// OS X only: This controls if an empty window is created at startup or not.
//在打開程式的時候建立視窗,針對OS X
"create_window_at_startup": true,
// Set to true to close windows as soon as the last file is closed, unless
// there's a folder open within the window. This is always enabled on OS X,
// changing it here won't modify the behavior.
//當沒有檔案時,關閉程式,針對Windows
"close_windows_when_empty": false,
// Show the full path to files in the title bar.
// On OS X, this value is overridden in the platform specific settings, so
// you'll need to place this line in your user settings to override it.
//在标題欄顯示絕對路徑
"show_full_path": true,
// Shows the Build Results panel when building. If set to false, the Build
// Results can be shown via the Tools/Build Results menu.
"show_panel_on_build": true,
// Preview file contents when clicking on a file in the side bar. Double
// clicking or editing the preview will open the file and assign it a tab.
//在側邊欄預覽檔案
"preview_on_click": true,
// folder_exclude_patterns and file_exclude_patterns control which files
// are listed in folders on the side bar. These can also be set on a per-
// project basis.
// 哪些檔案會被顯示到邊欄上
"folder_exclude_patterns": [".svn", ".git", ".hg", "CVS"],
"file_exclude_patterns": ["*.pyc", "*.pyo", "*.exe", "*.dll", "*.obj","*.o", "*.a", "*.lib", "*.so", "*.dylib", "*.ncb", "*.sdf", "*.suo", "*.pdb", "*.idb", ".DS_Store", "*.class", "*.psd", "*.db"],
// These files will still show up in the side bar, but won't be included in
// Goto Anything or Find in Files
"binary_file_patterns": ["*.jpg", "*.jpeg", "*.png", "*.gif", "*.ttf", "*.tga", "*.dds", "*.ico", "*.eot", "*.pdf", "*.swf", "*.jar", "*.zip"],
// List any packages to ignore here. When removing entries from this list,
// a restart may be required if the package contains plugins.
// 删除你想要忽略的插件,需要重新開機
"ignored_packages": ["Vintage"]
}