車載以太網-100BASE-T1 SFP Module

100BASE-T1 SFP Module——100BASE-T1和SGMII之間全雙工轉換

The 100BASE-T1 SFP Module is the optimum solution to convert between 100BASE-T1 and SGMII. It fits into a standard Small Form-factor Pluggable (SFP) and generates 100 Mbit/s full-duplex 100BASE-T1.

100BASE-T1 SFP子產品是在100BASE-T1和SGMII之間進行轉換的最佳解決方案。 它采用标準的小型可插拔（SFP），可生成100 Mbit / s全雙工100BASE-T1。

It configures itself to Automotive 100BASE-T1 after power up. Master/slave mode of operation can be set with the DIP switch.

它在上電後配置為車載100BASE-T1。 可以使用DIP開關設定主/從操作模式。

Registers of the integrated Transceiver are accessible via I2C interface for diagnosis and reconfiguration.

可通過I2C接口通路內建收發器的寄存器，以進行診斷和重新配置。

It works seemlessly with our MediaGateway, which has one SFP slot.

它與我們的MediaGateway無縫相容， MediaGateway有一個SFP插槽。

Features 特點

• 100BASE-T1 and SGMII converter

  實作100Base-T1和SGMIi轉換

• DIP switch for Master/ Slave configuration

  通過DIP 開關實作Master/Slave配置

• Supports I2C for internal register access

  收發器的寄存器可以通過I2C接口通路

• Fits into a standard SFP Slot

  适用标準的SFP插槽

• Power requirements: 3.3 Volt DC

  供電：3.3V 直流

• Size: 68 x 14 x 14 mm

  尺寸：68 x 14 x 14 毫米