Hello everyone, I'm Long'er, don't throw away the empty drink bottles in the house, so that the two knives solve the big problem of every household.
After watching the video, I quickly made one, which is so practical. I believe that there are many drink bottles like these in every household, in addition to this large one, there are also this relatively small one, and they usually throw it away after drinking the drink.
In fact, there are many uses for drinking bottles like this in our homes, and the bottles we are going to use today should be as large as possible.
Therefore, we don't need this relatively small mineral water bottle today, like the drink bottle that usually drinks Sprite and Coke, we can use it, and we remove the packaging before use.
Of course, if you prefer the packaging on the top of the bottle and its pattern and color, then you don't need to tear it off.
After tearing it off, we now rinse the bottle with running water, because it is a drink, so it still contains some drink residues, sweet and sticky, which will affect the finished product we make, so it must be cleaned.
After washing the bottle, we try to control the moisture inside, then tighten the cap, and then wipe the moisture on the surface of the bottle with a towel.
Then take a disposable cup at home, like a paper cup, a plastic cup can be covered at the mouth of our bottle like this, where the mouth of the cup touches, we can also use a marker pen to make a mark, and if we can remember, we will directly use a utility knife along the place where the bottle mouth just touched, and cut this part of the bottle mouth to it.
If you have scissors at home, if you feel more convenient to use scissors like me, we can also change to scissors to cut, I personally think it will be more convenient and easy to use with scissors.
Then cut off the bottom of it, this place is relatively hard, before the scissors we use a utility knife to poke a small hole in it, and then directly use scissors along the edge of the bottom of the bottom of the plastic bottle to cut off all the bottom, cut off this part of the Oh, a while to use it, this time with a towel to dry the water inside.
Be sure to use a clean towel, after all the drying, now we use scissors to cut it into such fine pieces from the bottom edge of the bottle mouth, each small piece is about 0.5 cm wide, after all the cuts, we get a bottle of this kind.
Then gently press it in the middle with your hand, press it like this, make the bottle mouth smaller, more flexible, and after a little tidying, we have a plastic bottle of these.
So what exactly is a plastic bottle like this for? Many friends may be confused, when it comes to disposable cups, every household has them, and he has brought a lot of convenience to our lives.
For example, when going out for a picnic, for example, when guests come to the house, then as long as a disposable cup is used, so that we can avoid the embarrassing situation of washing the cup or the cup being dirty, or breaking the cup, and the disposable cup like this is thrown away when it is used up, which is clean and trouble-free, although it is particularly convenient and brings us a lot of convenience.
However, there are 50 disposable cups like this in a pack, so if there are so many cups at once, if there is no storage box, there will be this and that one everywhere, and the mood is bad just by looking at it.
So the plastic bottle we made just now is actually a disposable cup storage box, our homemade storage box, so before using, we need to use a lighter to bake the edge of the cut, because there will be a lot of plastic barbs in the cut place, which is easy to scratch the hand, and the practicality is not great.
After the bottle mouth is baked, now the bottom of the part of the bottle that we just cut off also needs to be baked back and forth with a lighter.
After a simple bake, first put it aside for later use, and then we can choose one side at any place on the surface of the plastic bottle, and then put hot melt glue on it, and the hot melt glue should be a little more.
After laying the glue, now we can paste it anywhere we want to paste, such as in the kitchen, such as in the living room, in the dining room, or next to our water dispenser, it can be pasted very firmly, you can see that no matter how you pull and how you slap, it is still immovable, especially firm.
Now we can put all the disposable cups in, and we can cover the part that has just been cut out, and we can cover it directly on top of this disposable cup storage artifact that we have made ourselves.
In fact, we have strong hands-on ability, we can also wrap some good-looking cloth on our plastic bottle, or paste some of our favorite paintings on the plastic bottle, so that it will appear more individual, so that we can see that our cup storage artifact is done, it is particularly convenient when taking the cup, and it is not stuck at all.
Not only that, but these cups in our bottles, it doesn't take two or more at once, and it doesn't fall out of it, so do you know what the principle is? Feel free to leave a message in the comment area!
It can be seen with the naked eye that the cup storage artifact we made is quite successful, no matter which corner of the home is not easy to find, it does not take up space, and it is also very beautiful. Isn't this small way to store paper cups that I shared with you today very good?
You must know that it costs more than 10 or 20 yuan or even higher to buy a container for storing cups, but we only need to use a plastic bottle at home to easily store our paper cups, whether it is this kind of paper cup or our plastic cup, you can use it to store Oh, even if you don't want it, you won't feel a pity to take it off and throw it away.
Then I hope today's sharing can help you, like my video, remember to like and follow and collect, this issue of video sharing is here, let's see you in the next video, bye. #头条创作挑战赛#