在完成了POD和VM之间互访验证后，本篇将进入VM中，重点关注两个常用的流量管理能力：
- 应用通过标签进行分组
- 每个分组的多个副本可以动态落组和迁出
本篇
示例的拓扑如下图所示。ack中部署上游服务hello1，请求下游服务hello2。在4个ecs节点上，各部署了一个hello2应用，其中两个为
en
版本，与hello1之间的通信使用蓝线表示；另外两个为
fr
版本，与hello1之间的通信使用绿线表示。
1 搭建实验环境
部署hello1 POD
alias k="kubectl --kubeconfig $USER_CONFIG"
k apply -f yaml/hello1-deploy.yaml 部署hello2 app
在 vm1/vm2两个ecs节点上启动如下docker container，作为group1
sh sh/ssh1.sh
docker run \
--rm \
--network host \
--name http_v1 \
registry.cn-beijing.aliyuncs.com/asm_repo/http_springboot_v1:1.0.1 在 vm3/vm4两个ecs节点上启动如下docker container，作为group2
sh sh/ssh3.sh
docker run \
--rm \
--network host \
--name http_v2 \
registry.cn-beijing.aliyuncs.com/asm_repo/http_springboot_v2:1.0.1 部署hello2 WorkloadEntry
MESH_ID=$(head -n 1 "$MESHID_CONFIG")
aliyun servicemesh AddVmAppToMesh \
--ServiceMeshId "$MESH_ID" \
--Namespace vm-blue-green \
--ServiceName hello2-svc \
--Ips "$VM_PRI_1","$VM_PRI_2","$VM_PRI_3","$VM_PRI_4" \
--Ports http:8001 \
--Labels app=http-workload
echo "done" 为4个WorkloadEntry增加version标签，v1/v2的设置为
v1
，v3/v4的设置为
v2
spec:
address: 192.168.0.170
labels:
app: http-workload
version: v1 2 蓝绿部署验证
hello2 VirtualService
apiVersion: networking.istio.io/v1alpha3
kind: VirtualService
metadata:
namespace: hello-grouping
name: hello2-vs
spec:
hosts:
- hello2-svc
http:
- name: http-route
match:
- uri:
prefix: /hello
route:
- destination:
host: hello2-svc
subset: v1
weight: 50
- destination:
host: hello2-svc
subset: v2
weight: 50 hello2 DestinationRule
apiVersion: networking.istio.io/v1alpha3
kind: DestinationRule
metadata:
namespace: hello-grouping
name: hello2-dr
spec:
host: hello2-svc
subsets:
- name: v1
labels:
version: v1
trafficPolicy:
loadBalancer:
simple: ROUND_ROBIN
- name: v2
labels:
version: v2
trafficPolicy:
loadBalancer:
simple: ROUND_ROBIN 轮询验证
hello1_pod=$(k get pod -l app=hello1-deploy -n hello-grouping -o jsonpath={.items..metadata.name})
verify_in_loop() {
for i in {1..8}; do
echo ">$i test hello2-svc.hello-grouping.svc.cluster.local"
resp=$(k exec "$hello1_pod" -c hello-v1-deploy -n hello-grouping -- \
curl -s hello2-svc.hello-grouping.svc.cluster.local:8001/hello/eric)
if [[ "no healthy upstream" == $resp ]]; then
echo "stop, no healthy upstream."
exit
fi
echo "$resp"
done
}
m get workloadentry -n hello-grouping -o wide
verify_in_loop 预期的结果如下所示。流量转移首先会按照group间(
v1
和
v2
)的比例配置进行，进入group后会按负载均衡策略(ROUND_ROBIN)进行路由。
...
>5 test hello2-svc.hello-grouping.svc.cluster.local
Hello eric(192.168.0.171)
>6 test hello2-svc.hello-grouping.svc.cluster.local
Hello eric(192.168.0.170)
>7 test hello2-svc.hello-grouping.svc.cluster.local
Bonjour eric(192.168.0.172)
>8 test hello2-svc.hello-grouping.svc.cluster.local
Bonjour eric(192.168.0.198) 3 应用落迁验证
当前group1和group2各有2个实例，我们按如下顺序动态删除和增加workloadentry并验证流量：
- 将vm4从group2中迁出，使group1和group2节点比例为2:1
- 将vm2从group1中迁出，使group1和group2节点比例为1:1
- 将vm4落入group2，使group1和group2节点比例为1:2
- 将vm2落入group1，使group1和group2节点比例为2:2
hello1_pod=$(k get pod -l app=hello1-deploy -n hello-grouping -o jsonpath={.items..metadata.name})
echo "1 Test blue-green 2:1"
m delete workloadentry mesh-expansion-hello2-svc-4 -n hello-grouping
m get workloadentry -n hello-grouping -o wide
verify_in_loop
echo "2 Test blue-green 1:1"
m delete workloadentry mesh-expansion-hello2-svc-2 -n hello-grouping
m get workloadentry -n hello-grouping -o wide
verify_in_loop
echo "3 Test blue-green 1:2"
m apply -f yaml/wl4.yaml
m get workloadentry -n hello-grouping -o wide
verify_in_loop
echo "4 Test blue-green 2:2"
m apply -f yaml/wl2.yaml
m get workloadentry -n hello-grouping -o wide
verify_in_loop verify_in_loop() {
echo >test_traffic_result
for i in {1..100}; do
resp=$(k exec "$hello1_pod" -c hello-v1-deploy -n hello-grouping -- curl -s hello2-svc.hello-grouping.svc.cluster.local:8001/hello/eric)
if [[ "no healthy upstream" == $resp ]]; then
echo "stop, no healthy upstream."
rm -f test_traffic_result
exit
fi
echo "$resp" >>test_traffic_result
done
echo "result:"
sort test_traffic_result | grep -v "^[[:space:]]*$" | uniq -c | sort -nrk1
rm -f test_traffic_result
} 期待的结果如下。
1 Test blue-green 2:1
workloadentry.networking.istio.io "mesh-expansion-hello2-svc-4" deleted
NAME AGE
mesh-expansion-hello2-svc-1 28m
mesh-expansion-hello2-svc-2 64s
mesh-expansion-hello2-svc-3 28m
result:
56 Bonjour eric(192.168.0.172)
22 Hello eric(192.168.0.171)
22 Hello eric(192.168.0.170) 2 Test blue-green 1:1
workloadentry.networking.istio.io "mesh-expansion-hello2-svc-2" deleted
NAME AGE
mesh-expansion-hello2-svc-1 28m
mesh-expansion-hello2-svc-3 28m
result:
51 Bonjour eric(192.168.0.172)
49 Hello eric(192.168.0.170) 3 Test blue-green 1:2
workloadentry.networking.istio.io/mesh-expansion-hello2-svc-4 created
NAME AGE
mesh-expansion-hello2-svc-1 29m
mesh-expansion-hello2-svc-3 29m
mesh-expansion-hello2-svc-4 0s
result:
53 Hello eric(192.168.0.170)
24 Bonjour eric(192.168.0.198)
23 Bonjour eric(192.168.0.172) 4 Test blue-green 2:2
workloadentry.networking.istio.io/mesh-expansion-hello2-svc-2 created
NAME AGE
mesh-expansion-hello2-svc-1 29m
mesh-expansion-hello2-svc-2 1s
mesh-expansion-hello2-svc-3 29m
mesh-expansion-hello2-svc-4 37s
result:
26 Hello eric(192.168.0.171)
26 Hello eric(192.168.0.170)
24 Bonjour eric(192.168.0.198)
24 Bonjour eric(192.168.0.172) 到此，VM应用动态落迁实践验证完毕。通过本篇实验，我们可以掌握如何将VM应用进行分组，并根据实际情况，通过workload entry进行动态落组和迁出。
![1.Linux命令行使用技巧[图]](data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACwAAAAAAQABAAACAkQBADs=)