H3C 交换机 OpenFlow 配置指南

目录

1. Console 连接交换机
2. 配置 VLAN
3. 创建实例并映射 VLAN
4. 配置控制器1的IP地址并激活实例
5. 验证配置

1. Console 连接交换机

笔记本连接需要一个 USB 转 RS232 串口线。

MacOS

连接后，MacOS 下可以从终端查看设备状态

bash $ ls /dev/cu.usbserial-*
/dev/cu.usbserial-A106Z8ML
           

然后可以用 screen 连接。

screen /dev/cu.usbserial-A106Z8ML
           

Windows

可以用 SecureCRT 或者串口精灵之类的程序通过串口连接。

连接以后，按几次 Enter，输出大概是

<H3C>%Jan  1 21:20:28:599 2011 H3C SHELL/5/SHELL_LOGIN: TTY logged in from aux0.

<H3C>
           

2. 配置 VLAN

创建VLAN 4092和4094

<H3C> system-view

[H3C] vlan 4092

[H3C-vlan4092] quit

[H3C] vlan 4094

[H3C-vlan4094] quit
           

创建VLAN接口1并配置IP地址

上图是官方文档中的例子

[H3C] interface vlan-interface 1

[H3C-Vlan-interface1] undo shutdown

[H3C-Vlan-interface1] ip address 192.168.49.1 24

[H3C-Vlan-interface1] quit
           

设置完以后，将控制器所在PC的IP地址设置为 192.168.49.49，可以通过 ping 测试是否连通。

[H3C]ping 192.168.49.49
Ping 192.168.49.49 (192.168.49.49): 56 data bytes, press CTRL_C to break
56 bytes from 192.168.49.49: icmp_seq=0 ttl=64 time=1.897 ms
56 bytes from 192.168.49.49: icmp_seq=1 ttl=64 time=1.268 ms
56 bytes from 192.168.49.49: icmp_seq=2 ttl=64 time=1.627 ms
56 bytes from 192.168.49.49: icmp_seq=3 ttl=64 time=1.170 ms
56 bytes from 192.168.49.49: icmp_seq=4 ttl=64 time=1.855 ms

--- Ping statistics for 192.168.49.49 ---
5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 1.170/1.563/1.897/0.297 ms
[H3C]%Jan  1 21:47:00:208 2011 H3C PING/6/PING_STATISTICS: Ping statistics for 192.168.49.49: 5 packet(s) transmitted, 5 packet(s) received, 0.0% packet loss, round-trip min/avg/max/std-dev = 1.170/1.563/1.897/0.297 ms.
           

3. 创建 OpenFlow 实例并映射 VLAN

<H3C> system-view

[H3C] openflow instance 1

[H3C-of-inst-1] classification vlan 4092 mask 4093
           

配置端口

[H3C]interface Ten-GigabitEthernet 1/0/1

[H3C-Ten-GigabitEthernet1/0/1] port type trunk 

[H3C-Ten-GigabitEthernet1/0/1] port trunk permit vlan 4092

[H3C-Ten-GigabitEthernet1/0/1] quit
           

我们需要把希望 OpenFlow 管理的端口加入 vlan 4092 中。

其中 1/0/1 用于连接控制器，1/0/2 保留。

<H3C> system-view

[H3C] vlan 4092

[H3C-vlan4092] port Ten-GigabitEthernet 1/0/3 Ten-GigabitEthernet 1/0/4 ... Ten-GigabitEthernet 1/0/48

[H3C-vlan4092] quit
           

4. 配置控制器1的IP地址并激活实例

[H3C-of-inst-1] controller 1 address ip 192.168.49.49

[H3C-of-inst-1] active instance
           

5. 验证配置

<H3C-of-inst-1> display openflow instance 1

Instance 1 information:

Configuration information:
 Description   : --
 Active status : Active
 Inactive configuration:
  None
 Active configuration:
  Classification: VLAN, total VLANs(1)
   4092
  In-band management VLAN, total VLANs(0)
   Empty VLAN
  Connect mode: Multiple
  MAC address learning: Enabled
  TCP DSCP value: 64
  Flow table:
   Table ID(type): 0(Extensibility), count: 9
  Flow-entry max-limit: 65535
  Datapath ID: 0x000188df9eeaaaaa
  Default table-miss: Drop
  Forbidden port: None
  Qinq Network: Disabled
  TCP connection backup: Enabled
Port information:
 Ten-GigabitEthernet1/0/1
 Ten-GigabitEthernet1/0/3
 Ten-GigabitEthernet1/0/4
 ...
 Ten-GigabitEthernet1/0/47
 Ten-GigabitEthernet1/0/48
Active channel information:
 Controller 1 IP address: 192.168.49.49 port: 6633

           

然后就可以在 PC 上启动控制器，等待交换机连接。

参考文档

[1] OpenFlow配置实例（详解）

[2] OpenFlow配置指导

[3] 二层技术-以太网交换配置指导(各种 VLAN 配置)

[4] S12500上的OpenFlow配置

[5] H3C S6800系列以太网交换机配置