Wave and Wave Body Interactions | |
---|---|
Current Chapter | Ship Kelvin Wake |
Next Chapter | Linear Wave-Body Interaction |
Previous Chapter | Wavemaker Theory |
This is an incomplete page |
---|
Contents
[hide]
- 1 Introduction
- 1.1 Translating Coordinate System
- 1.2 Kelvin wake
- 1.3 Application of the Group velocity
- 1.4 Solution of the equation for angle
Introduction
Wake created behind a ship
A ship moving over the surface of undisturbed water sets up waves emanating from the bow and stern of the ship. The waves created by the ship consist of divergent and transverse waves. The divergent wave are observed as the wake of a ship with a series of diagonal or oblique crests moving outwardly from the point of disturbance. These wave were first studied by Lord Kelvin
Translating Coordinate System
We have a the standard fixed coordinate system
x,y,z x,y,z and a moving coordinate systems which is moving in the x x direction with speed U U . We denote the moving coordinate systems in the x x direction by
x¯=x+Ut x¯=x+Ut
Let
Φ(x,t) Φ(x,t) be the velocity potential describing the potential flow generated by the ship relative to the earth frame. The same potential expressed relative to the ship frame is Φ¯(x¯,t) Φ¯(x¯,t) . The relation between the two potentials is given by the identity
Φ(x,y,z,t)=Φ¯(x¯,y,z,t)=Φ¯(x−Ut,y,z,t) Φ(x,y,z,t)=Φ¯(x¯,y,z,t)=Φ¯(x−Ut,y,z,t)
where the relation between the coordinates of the two coordinate systems has been introduced. Note the time dependence occurs in two places in
Φ¯ Φ¯ and in one place in Φ Φ . The governing equations are always derived relative to the earth coordinate system and time derivatives are initially taken on Φ Φ . Therefore
dΦdt=ddtϕ¯(x−Ut,y,z,t)=∂ϕ∂t−U∂ϕ∂x dΦdt=ddtϕ¯(x−Ut,y,z,t)=∂ϕ∂t−U∂ϕ∂x
All time derivatives of the earth fixed velocity potential
Φ Φ which appear in the free surface condition and the Bernoulli equation can be expressed in terms of derivatives of Φ¯ Φ¯ using the Galilean transformation derived above.
If the flow is steady relative to the ship fixed coordinate system
∂Φ¯∂t=0 ∂Φ¯∂t=0
but
dΦdt=−U∂Φ¯∂x dΦdt=−U∂Φ¯∂x
or, the ship wake is stationary relative to the ship but not relative to an observed on the beach.
Kelvin wake
Diagram of the Kelvin Wake
Local view of Kelvin wake consists approximately of a plane progressive wave group propagating in direction
θ θ . As noted above surface wave systems of general form always consist of combinations of plane progressive waves of different frequencies and directions. The same model will apply to the ship kelvin wake. Relative to the earth frame, the local plane wave in Infinite Depth takes the form
Φ=igAωekz−ik(xcosθ+ysinθ)+iωt Φ=igAωekz−ik(xcosθ+ysinθ)+iωt
Relative to the ship frame
barΦ=igAωekz−ik(xcosθ+ysinθ)−i(kUcosθ−ω)t barΦ=igAωekz−ik(xcosθ+ysinθ)−i(kUcosθ−ω)t
But relative to the ship frame waves are stationary, so we must have:
kUcosθ=ω kUcosθ=ω
or
ωk=Cp=Ucosθ ωk=Cp=Ucosθ
This implies the following
- The phase velocity of the waves in the kelvin wake propagating in direction θ θ must be equal to Ucosθ Ucosθ , otherwise they cannot be stationary relative to the ship.
- Relative to the earth system the frequency of a local system propagating in direction θ θ is given by the relation ω=kUcosθ ω=kUcosθ
Relative to the earth system the Infinite Depth Dispersion Relation for a Free Surface states
ω2=gk ω2=gk
so that
λ(θ)=2πU2cos2θg λ(θ)=2πU2cos2θg
This is the wavelength of waves in a Kelvin wake propagating in direction
θ θ which are stationary relative to the ship.
Application of the Group velocity
An observer sitting on an earth fixed frame observes a local wave system propagating in direction
θ θ travelling at its group velocity dωdK dωdK by virtue of the Rayleigh device which states that we need to focus on the speed of the energy density ( ∼ ∼ wave amplitude) rather than the speed of wave crests. So, relative to the earth fixed inclined coordinate system (X′,Y′) (X′,Y′) :
X′t=Vg=dωdK X′t=Vg=dωdK
Or
X′=dωdKt ⟹ ddK(KX′−ωt)=0 X′=dωdKt ⟹ ddK(KX′−ωt)=0 X′=Xcosθ+Ysinθ=xcosθ+ysinθ+Utcosθ X′=Xcosθ+Ysinθ=xcosθ+ysinθ+Utcosθ
So:
KX′−ωt=K(xcosθ+ysinθ)+(KUcosθ−ω)t KX′−ωt=K(xcosθ+ysinθ)+(KUcosθ−ω)t
However
(KUcosθ−ω)t=0 (KUcosθ−ω)t=0 so that the Rayleigh condition for the velocity of the group takes the form:
ddK[K(θ)(xcosθ+ysinθ)]=0 ddK[K(θ)(xcosθ+ysinθ)]=0
By virtue of the dispersion relation derived above:
K(θ)=gU2cos2θ K(θ)=gU2cos2θ
It follows from the chain rule of differentiation that Rayleigh's condition is:
ddθ[gU2cos2θ(xcosθ+ysinθ)]]=0 ddθ[gU2cos2θ(xcosθ+ysinθ)]]=0
At the position of the Kelvin waves which are locally observed by an observer at the beach.
- So the "visible" waves in the wake of a ship are wave groups which must travel at the local group velocity. These conditions translate into the above equation which will be solved and discussed next. More discussion and a more mathematical derivation based on the principle of stationary phase can be found in Newman 1977.
Solution of the equation for angle
Graphical image of the equations
The solution of the above equation will produce a relation between
yx yx and θ θ . So local waves in a Kelvin wake can only propagate in a certain direction θ θ , given yx yx .
Simple algebra leads to:
yx=−cosθsinθ1+sin2θ=yx(θ) yx=−cosθsinθ1+sin2θ=yx(θ)
which implies that
- yx(θ) yx(θ) is anti-symmetric about θ=0 θ=0 and each part corresponds to the Kelvin wake in the port and starboard sides of the vessel. The physics on
either side is identical due to symmetry.
- θ=0 θ=0 : waves propagating in the same direction as the ship. These waves can only exist at Y=0 Y=0 as seen above.
- θ=π2 θ=π2 : waves propagating at a 90∘ 90∘ angle relative to the ship direction of forward translation.
- θ=35∘16′ θ=35∘16′ : (or 35,26°) waves propagating at an angle θ=35∘16′ θ=35∘16′ relative to the ship axis. These are waves seen at the caustic of the Kelvin wake.
Let the solution of
yx(θ) yx(θ) be of the form, when inverted:
Region I:θ=f1(yx) Region I:θ=f1(yx) Region II:θ=f2(yx) Region II:θ=f2(yx)
Note that observable waves cannot exist for values of
yx yx that exceed the value shown in the figure or yx∣∣Max=2−3/2 yx|Max=2−3/2 . This translates into a value for the corresponding angle equal to 19∘28′ 19∘28′ (or 19,47°) which is the angle of the caustic for any speed U U .
"transverse" and "divergent" wave systems in the Kelvin wake
The crests of the wave system trailing a ship, the Kelvin wake, are curves of constant phase of:
xcosθ+ysinθcos2θ=C xcosθ+ysinθcos2θ=C
In
Region I Region I :
C=xcosf1(yx)+ysinf1(yx)cos2f1(yx)≡G1(yx) C=xcosf1(yx)+ysinf1(yx)cos2f1(yx)≡G1(yx)
In
Region II Region II :
C=xcosf2(yx)+ysinf2(yx)cos2f2(yx)≡G2(yx) C=xcosf2(yx)+ysinf2(yx)cos2f2(yx)≡G2(yx)
Plotting these curves we obtain a visual graph of the "transverse" and "divergent" wave systems in the Kelvin wake.
This article is based on the MIT open course notes and the original article can be found here
Ocean Wave Interaction with Ships and Offshore Energy Systems
Categories:
- Ocean Wave Interaction with Ships and Offshore Structures
- Incomplete Pages
- Linear Water-Wave Theory
Wave and Wave Body Interactions | |
---|---|
Current Chapter | Ship Kelvin Wake |
Next Chapter | Linear Wave-Body Interaction |
Previous Chapter | Wavemaker Theory |
This is an incomplete page |
---|
Contents
[hide]
- 1 Introduction
- 1.1 Translating Coordinate System
- 1.2 Kelvin wake
- 1.3 Application of the Group velocity
- 1.4 Solution of the equation for angle
Introduction
Wake created behind a ship
A ship moving over the surface of undisturbed water sets up waves emanating from the bow and stern of the ship. The waves created by the ship consist of divergent and transverse waves. The divergent wave are observed as the wake of a ship with a series of diagonal or oblique crests moving outwardly from the point of disturbance. These wave were first studied by Lord Kelvin
Translating Coordinate System
We have a the standard fixed coordinate system
x,y,z x,y,z and a moving coordinate systems which is moving in the x x direction with speed U U . We denote the moving coordinate systems in the x x direction by
x¯=x+Ut x¯=x+Ut
Let
Φ(x,t) Φ(x,t) be the velocity potential describing the potential flow generated by the ship relative to the earth frame. The same potential expressed relative to the ship frame is Φ¯(x¯,t) Φ¯(x¯,t) . The relation between the two potentials is given by the identity
Φ(x,y,z,t)=Φ¯(x¯,y,z,t)=Φ¯(x−Ut,y,z,t) Φ(x,y,z,t)=Φ¯(x¯,y,z,t)=Φ¯(x−Ut,y,z,t)
where the relation between the coordinates of the two coordinate systems has been introduced. Note the time dependence occurs in two places in
Φ¯ Φ¯ and in one place in Φ Φ . The governing equations are always derived relative to the earth coordinate system and time derivatives are initially taken on Φ Φ . Therefore
dΦdt=ddtϕ¯(x−Ut,y,z,t)=∂ϕ∂t−U∂ϕ∂x dΦdt=ddtϕ¯(x−Ut,y,z,t)=∂ϕ∂t−U∂ϕ∂x
All time derivatives of the earth fixed velocity potential
Φ Φ which appear in the free surface condition and the Bernoulli equation can be expressed in terms of derivatives of Φ¯ Φ¯ using the Galilean transformation derived above.
If the flow is steady relative to the ship fixed coordinate system
∂Φ¯∂t=0 ∂Φ¯∂t=0
but
dΦdt=−U∂Φ¯∂x dΦdt=−U∂Φ¯∂x
or, the ship wake is stationary relative to the ship but not relative to an observed on the beach.
Kelvin wake
Diagram of the Kelvin Wake
Local view of Kelvin wake consists approximately of a plane progressive wave group propagating in direction
θ θ . As noted above surface wave systems of general form always consist of combinations of plane progressive waves of different frequencies and directions. The same model will apply to the ship kelvin wake. Relative to the earth frame, the local plane wave in Infinite Depth takes the form
Φ=igAωekz−ik(xcosθ+ysinθ)+iωt Φ=igAωekz−ik(xcosθ+ysinθ)+iωt
Relative to the ship frame
barΦ=igAωekz−ik(xcosθ+ysinθ)−i(kUcosθ−ω)t barΦ=igAωekz−ik(xcosθ+ysinθ)−i(kUcosθ−ω)t
But relative to the ship frame waves are stationary, so we must have:
kUcosθ=ω kUcosθ=ω
or
ωk=Cp=Ucosθ ωk=Cp=Ucosθ
This implies the following
- The phase velocity of the waves in the kelvin wake propagating in direction θ θ must be equal to Ucosθ Ucosθ , otherwise they cannot be stationary relative to the ship.
- Relative to the earth system the frequency of a local system propagating in direction θ θ is given by the relation ω=kUcosθ ω=kUcosθ
Relative to the earth system the Infinite Depth Dispersion Relation for a Free Surface states
ω2=gk ω2=gk
so that
λ(θ)=2πU2cos2θg λ(θ)=2πU2cos2θg
This is the wavelength of waves in a Kelvin wake propagating in direction
θ θ which are stationary relative to the ship.
Application of the Group velocity
An observer sitting on an earth fixed frame observes a local wave system propagating in direction
θ θ travelling at its group velocity dωdK dωdK by virtue of the Rayleigh device which states that we need to focus on the speed of the energy density ( ∼ ∼ wave amplitude) rather than the speed of wave crests. So, relative to the earth fixed inclined coordinate system (X′,Y′) (X′,Y′) :
X′t=Vg=dωdK X′t=Vg=dωdK
Or
X′=dωdKt ⟹ ddK(KX′−ωt)=0 X′=dωdKt ⟹ ddK(KX′−ωt)=0 X′=Xcosθ+Ysinθ=xcosθ+ysinθ+Utcosθ X′=Xcosθ+Ysinθ=xcosθ+ysinθ+Utcosθ
So:
KX′−ωt=K(xcosθ+ysinθ)+(KUcosθ−ω)t KX′−ωt=K(xcosθ+ysinθ)+(KUcosθ−ω)t
However
(KUcosθ−ω)t=0 (KUcosθ−ω)t=0 so that the Rayleigh condition for the velocity of the group takes the form:
ddK[K(θ)(xcosθ+ysinθ)]=0 ddK[K(θ)(xcosθ+ysinθ)]=0
By virtue of the dispersion relation derived above:
K(θ)=gU2cos2θ K(θ)=gU2cos2θ
It follows from the chain rule of differentiation that Rayleigh's condition is:
ddθ[gU2cos2θ(xcosθ+ysinθ)]]=0 ddθ[gU2cos2θ(xcosθ+ysinθ)]]=0
At the position of the Kelvin waves which are locally observed by an observer at the beach.
- So the "visible" waves in the wake of a ship are wave groups which must travel at the local group velocity. These conditions translate into the above equation which will be solved and discussed next. More discussion and a more mathematical derivation based on the principle of stationary phase can be found in Newman 1977.
Solution of the equation for angle
Graphical image of the equations
The solution of the above equation will produce a relation between
yx yx and θ θ . So local waves in a Kelvin wake can only propagate in a certain direction θ θ , given yx yx .
Simple algebra leads to:
yx=−cosθsinθ1+sin2θ=yx(θ) yx=−cosθsinθ1+sin2θ=yx(θ)
which implies that
- yx(θ) yx(θ) is anti-symmetric about θ=0 θ=0 and each part corresponds to the Kelvin wake in the port and starboard sides of the vessel. The physics on
either side is identical due to symmetry.
- θ=0 θ=0 : waves propagating in the same direction as the ship. These waves can only exist at Y=0 Y=0 as seen above.
- θ=π2 θ=π2 : waves propagating at a 90∘ 90∘ angle relative to the ship direction of forward translation.
- θ=35∘16′ θ=35∘16′ : (or 35,26°) waves propagating at an angle θ=35∘16′ θ=35∘16′ relative to the ship axis. These are waves seen at the caustic of the Kelvin wake.
Let the solution of
yx(θ) yx(θ) be of the form, when inverted:
Region I:θ=f1(yx) Region I:θ=f1(yx) Region II:θ=f2(yx) Region II:θ=f2(yx)
Note that observable waves cannot exist for values of
yx yx that exceed the value shown in the figure or yx∣∣Max=2−3/2 yx|Max=2−3/2 . This translates into a value for the corresponding angle equal to 19∘28′ 19∘28′ (or 19,47°) which is the angle of the caustic for any speed U U .
"transverse" and "divergent" wave systems in the Kelvin wake
The crests of the wave system trailing a ship, the Kelvin wake, are curves of constant phase of:
xcosθ+ysinθcos2θ=C xcosθ+ysinθcos2θ=C
In
Region I Region I :
C=xcosf1(yx)+ysinf1(yx)cos2f1(yx)≡G1(yx) C=xcosf1(yx)+ysinf1(yx)cos2f1(yx)≡G1(yx)
In
Region II Region II :
C=xcosf2(yx)+ysinf2(yx)cos2f2(yx)≡G2(yx) C=xcosf2(yx)+ysinf2(yx)cos2f2(yx)≡G2(yx)
Plotting these curves we obtain a visual graph of the "transverse" and "divergent" wave systems in the Kelvin wake.
This article is based on the MIT open course notes and the original article can be found here
Ocean Wave Interaction with Ships and Offshore Energy Systems
Categories:
- Ocean Wave Interaction with Ships and Offshore Structures
- Incomplete Pages
- Linear Water-Wave Theory