This product is the sum of the one-sided green leaf area per unit ground area.
A newer version JAXA/GCOM-C/L3/LAND/LAI/V2 is also available for this dataset which uses this algorithm for processing.
GCOM-C conducts long-term and continuous global observation and data collection to elucidate the mechanism behind fluctuations in radiation budget and carbon cycle needed to make accurate projections regarding future temperature rise. At the same time, cooperating with research institutions having a climate numerical model, it contributes to reduction of errors in temperature rise prediction derived from the climate numerical model and improvement of accuracy of prediction of various environmental changes. SGLI mounted on GCOM-C is the succession sensor of the Global Imager (GLI) mounted on ADEOS-II (MIDORI II) and is the Imaging Radiometer which measures the radiation from near-ultraviolet to thermal infrared region (380 nm-12 um) in 19 channels. Global observation of once for approximately every two days is possible at mid-latitude near Japan by observation width at ground greater than 1,000 km. In addition, SGLI realizes high resolution than the similar global sensor and has a polarized observation function and a multi-angle observation function.
此乘积为单位地面面积的单面绿叶面积之和。
更新版本的 JAXA/GCOM-C/L3/LAND/LAI/V2 也可用于此数据集,该数据集使用此算法进行处理。
GCOM-C 进行长期和持续的全球观测和数据收集,以阐明辐射收支和碳循环波动背后的机制,从而对未来温度上升做出准确预测。同时,与有气候数值模型的研究机构合作,有助于减少气候数值模型得出的温升预测误差,提高各种环境变化的预测精度。安装在 GCOM-C 上的 SGLI 是安装在 ADEOS-II (MIDORI II) 上的 Global Imager (GLI) 的连续传感器,是测量从近紫外到热红外区域 (380 nm-12 um) 的辐射的成像辐射计在 19 个频道中。在日本附近的中纬度地区,地面观测宽度超过 1,000 公里,可以进行大约每两天一次的全球观测。此外,SGLI 实现了比同类全局传感器更高的分辨率,并具有偏振观测功能和多角度观测功能。
Dataset Availability
2018-01-01T00:00:00 - 2020-06-28T00:00:00
Dataset Provider
Global Change Observation Mission (GCOM)
Collection Snippet
ee.ImageCollection("JAXA/GCOM-C/L3/LAND/LAI/V1")
Resolution
2.5 arc minutes
Bands Table
Name | Description | Min* | Max* | Units |
LAI_AVE | The sum of the one-sided green leaf area per unit ground area. | 65531 | none | |
LAI_QA_flag | LAI QA | |||
LAI_QA_flag Bitmask |
|
* = Values are estimated
影像属性:
Name | Type | Description |
ALGORITHM_VERSION | String | Algorithm version |
GRID_INTERVAL | String | Spatial resolution |
GRID_INTERVAL_UNIT | String | Unit of GRID_INTERVAL |
IMAGE_END_TIME | String | Image acquisition end time |
IMAGE_START_TIME | String | Image acquisition start time |
PROCESSING_RESULT | String | Good, Fair, Poor, NG |
PROCESSING_UT | String | Processing time |
PRODUCT_FILENAME | String | Source filename |
PRODUCT_VERSION | String | Product version |
SATELLITE_DIRECTION | String | Satellite orbit direction |
LAI_AVE_OFFSET | String | Offset |
LAI_AVE_SLOPE | String | Slope |
数据说明:
This dataset is free to use without any restrictions (including commercial use). Anyone wishing to publish analyzed results or value added data products should properly credit the original G-Portal data, e.g., "PR data by Japan Aerospace Exploration Agency". For value added data products, please indicate the credit of the original G-Portal data, e.g., "Original data for this value added data product was provided by Japan Aerospace Exploration Agency."
See G-Portal's terms of service (Article 7) for additional information.
引用:
Ono, Y. (Nov. 2011). GCOM-C1 / SGLI LAI Product Algorithm Theoretical Basis Document (Version 1). Retrieved from https://suzaku.eorc.jaxa.jp/GCOM_C/data/ATBD/ver1/Ono_Y_ATBD.pdf
var dataset = ee.ImageCollection("JAXA/GCOM-C/L3/LAND/LAI/V1")
.filterDate('2020-01-01', '2020-02-01');
// Multiply with slope coefficient
var dataset = dataset.mean().multiply(0.001).log10();
var visualization = {
bands: ['LAI_AVE'],
min: -3.0,
max: 1.66,
palette: [
"040274","040281","0502a3","0502b8","0502ce","0502e6",
"0602ff","235cb1","307ef3","269db1","30c8e2","32d3ef",
"3be285","3ff38f","86e26f","3ae237","b5e22e","d6e21f",
"fff705","ffd611","ffb613","ff8b13","ff6e08","ff500d",
"ff0000","de0101","c21301","a71001","911003",
]
};
Map.setCenter(128.45, 33.33, 5);
Map.addLayer(dataset, visualization, "Leaf Area Index");