Oracle linux 6.3 安装11g R2 RAC on vbox1 安装系统2安装oracle linux 6.33 rac1系统设置4 克隆并配置虚拟主机5 vbox虚拟共享存储并使用udev绑定 6 安装11g r2.1.0 gird7 asmca8安装db9 DBCA
1 安装系统
Virtual box 4.3
Oracle linux 6.3
Oracle 11g r2
Make sure "Adapter 1" is enabled, set to "Bridged Adapter", then click on the "Adapter 2" tab.
Make sure "Adapter 2" is enabled, set to "Bridged Adapter" or "Internal Network", then click on the "System" section.
Move "Hard Disk" to the top of the boot order and uncheck the "Floppy" option, then click the "OK" button.
取消软驱跟硬盘的启动方式，然后ok
The virtual machine is now configured so we can start the guest operating system installation.
2安装oracle linux 6.3
skip
选择语言
选择存储设备
Basic storage devices
Yes
Hostname----rac1
Configure network
Edit--connect automatically--eth0,eth1
Ipv4
192.168.2.188 255.255.255.0 192.168.2.2
1
172.168.1.18 vmac1-priv ----r1 eth1
时区
Password--xxxx
Replace existing linux system
Wirte
Desktop--
oracle linux service--
Customer later
安装包
reboot
forward
No.不要注册，no thankds
Username
Fullname
Password
不同步时区，
Finish
3 rac1系统设置
3.1 Disable firewall
[[email protected] ~]# service iptables stop
iptables: Flushing firewall rules: [ OK ]
iptables: Setting chains to policy ACCEPT: filter [ OK ]
iptables: Unloading modules: [ OK ]
[[email protected] ~]# chkconfig iptables off
[[email protected] ~]# chkconfig iptables --list
iptables 0:off 1:off 2:off 3:off 4:off 5:off 6:off
3.2 Disable selinux
vi /etc/selinux/config
Selinux=disable
[[email protected] ~]# vi /etc/selinux/config
SELINUX=disabled
3.3 /etc/hosts
Vi /etc/hosts copy ip 配置
[[email protected] ~]# vi /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.2.188 rac1
192.168.2.189 rac2
#Private IP
172.168.1.18 rac1-priv
172.168.1.19 rac2-priv
#Virtual IP
192.168.2.137 rac1-vip
192.168.2.138 rac2-vip
#Scan IP
192.168.2.139 rac-scan
Ping rac1
Ssh rac1
192.168.2.188 12crac1
192.168.2.189 12crac2
#Private IP
172.168.1.18 12crac1-priv
172.168.1.19 12crac2-priv
#Virtual IP
192.168.2.137 12crac1-vip
192.168.2.138 12crac2-vip
#Scan IP
192.168.2.139 12crac-scan
[[email protected] ~]# hostname
12crac1
3.4创建用户和组
[[email protected] ~]# groupdel asmadmin
- [[email protected] ~]# groupdel asmdba
- [[email protected] ~]# groupdel asmoper
- [[email protected] ~]# groupdel oinstall
- groupdel: cannot remove the primary group of user 'oracle'
- [[email protected] ~]# groupdel dba
- [[email protected] ~]# groupdel oinstall
- groupdel: cannot remove the primary group of user 'oracle'
- [[email protected] ~]# userdel oracle
- [[email protected] ~]# userdel grid
- [[email protected] ~]# groupdel oinstall
groupadd -g 5000 asmadmin
groupadd -g 5001 asmdba
groupadd -g 5002 asmoper
groupadd -g 6000 oinstall
groupadd -g 6001 dba
groupadd -g 6002 oper
useradd -g oinstall -G asmadmin,asmdba,asmoper grid
useradd -g oinstall -G dba,asmdba oracle
[[email protected] ~]# userdel grid
userdel: user grid is currently logged in
passwd oracle
--oracle
passwd grid
--grid
useradd: warning: the home directory already exists.
[[email protected] home]# userdel oracle
[[email protected] home]# ll
total 12
drwx------. 4 54322 54321 4096 Jan 27 13:59 grid
drwx------. 31 hongquanrac1 hongquanrac1 4096 Jan 28 03:06 hongquanrac1
drwx------. 4 54321 54321 4096 Jan 27 13:42 oracle
[[email protected] home]# rm -rf oracle/
[[email protected] home]# useradd -g oinstall -G dba,asmdba oracle
Creating mailbox file: File exists
[[email protected] home]# cd /var/spool/mail/
[[email protected] mail]# ll
total 0
-rw-rw----. 1 54322 mail 0 Jan 27 13:59 grid
-rw-rw----. 1 hongquanrac1 mail 0 Jan 26 22:23 hongquanrac1
-rw-rw----. 1 54321 mail 0 Jan 27 13:42 oracle
-rw-rw----. 1 rpc mail 0 Jan 26 21:59 rpc
[[email protected] mail]# rm oracle
rm: remove regular empty file `oracle'? y
[[email protected] mail]# useradd -g oinstall -G dba,asmdba oracle
useradd: user 'oracle' already exists
[[email protected] mail]# userdel oracle
[[email protected] mail]# useradd -g oinstall -G dba,asmdba oracle
useradd: warning: the home directory already exists.
Not copying any file from skel directory into it.
[[email protected] mail]# id oracle
uid=502(oracle) gid=6000(oinstall) groups=6000(oinstall),5001(asmdba),6001(dba)
[[email protected] mail]# su - oracle
[[email protected] ~]$
--------------
mkdir /s01
mkdir /g01
chown oracle:oinstall /s01
chown grid:oinstall /g01
[[email protected] ~]# mkdir /s01
[[email protected] ~]# mkdir /g01
[[email protected] ~]# chown oracle:oinstall /s01
[[email protected] ~]# chown grid:oinstall /g01
安装相应的包
[[email protected] ~]# cd /etc/yum.repos.d
[[email protected] yum.repos.d]# mv public-yum-ol6.repo public-yum-ol6.repo.bak
[[email protected] yum.repos.d]# touch public-yum-ol6.repo
[[email protected] yum.repos.d]# vi public-yum-ol6.repo
[oel6]
name = Enterprise Linux 6.3 DVD
baseurl=file:///media/"OL6.3 x86_64 Disc 1 20120626"/Server
gpgcheck=0
enabled=1
----OL6.3 x86_64 Disc 1 20120626
[[email protected] ~]# yum install oracle-rdbms-server-11gR2-preinstall-1.0-6.el6
--oracle-rdbms-server-12cR1-preinstall
Oracle官方文档中指定的在OracleLinux 6上使用oracle-rdbms-server-12cR1-preinstall功能，其实应该具体指定到ORACLELinux 6U6（6.6）版本才能支持。
3.5 etc/security/limits.conf
[[email protected] ~]# vi /etc/security/limits.conf
# oracle-rdbms-server-11gR2-preinstall setting for nofile soft limit is 1024
oracle soft nofile 1024
# oracle-rdbms-server-11gR2-preinstall setting for nofile hard limit is 65536
oracle hard nofile 65536
# oracle-rdbms-server-11gR2-preinstall setting for nproc soft limit is 2047
oracle soft nproc 2047
# grid-rdbms-server-11gR2-preinstall setting for nofile soft limit is 1024
grid soft nofile 1024
# grid-rdbms-server-11gR2-preinstall setting for nofile hard limit is 65536
grid hard nofile 65536
# grid-rdbms-server-11gR2-preinstall setting for nproc soft limit is 2047
grid soft nproc 2047
# grid-rdbms-server-11gR2-preinstall setting for nproc hard limit is 16384
grid hard nproc 16384
# grid-rdbms-server-11gR2-preinstall setting for stack soft limit is 10240KB
grid soft stack 10240
# grid-rdbms-server-11gR2-preinstall setting for stack hard limit is 32768KB
grid hard stack 32768
4 克隆并配置虚拟主机
默认配置到安装的目录，6.3的网络配置不一样
复制主机，当前状态，重新初始化mac地址------完全复制rac2
Init 6 重启，init 0 关机
修改vmac2的IP
cd /etc/udev/rules.d/
vi 70-persistent-net.rules
[[email protected] ~]# vim /etc/udev/rules.d/70-persistent-net.rules
用eth2，eth3的mac地址分别替换eth0，eth1的mac地址，并删除2,3
使用ifconfig
start_udev
Reboot/init 6重启过后
重启过后可以连接，不能连接请检查配置eth0，eth1的顺序
[[email protected] ~]# more /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x8086:0x1004 (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:12:29:85", ATTR{type}=="1", KERN
EL=="eth*", NAME="eth0"
# PCI device 0x8086:0x1004 (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:a6:fe:47", ATTR{type}=="1", KERN
EL=="eth*", NAME="eth1"
[[email protected] ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:12:29:85
inet addr:192.168.2.189 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe12:2985/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:478 errors:0 dropped:2 overruns:0 frame:0
TX packets:83 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:53165 (51.9 KiB) TX bytes:10537 (10.2 KiB)
eth1 Link encap:Ethernet HWaddr 08:00:27:A6:FE:47
inet addr:192.168.2.134 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fea6:fe47/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:4565 (4.4 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:480 (480.0 b) TX bytes:480 (480.0 b)
[[email protected] network-scripts]# pwd
/etc/sysconfig/network-scripts
[[email protected] network-scripts]# more ifcfg-Auto_eth0
HWADDR=08:00:27:12:29:85
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.2.189
PREFIX=24
GATEWAY=192.168.2.2
DNS1=192.168.2.2
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="Auto eth0"
UUID=6819daf9-606b-428f-a8fe-7a447825579c
ONBOOT=yes
LAST_CONNECT=1422351622
[[email protected] network-scripts]# more ifcfg-Auto_eth1
HWADDR=08:00:27:A6:FE:47
TYPE=Ethernet
BOOTPROTO=none
IPADDR=192.168.2.134
PREFIX=24
GATEWAY=192.168.2.2
DNS1=192.168.2.2
DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
IPV6INIT=no
NAME="Auto eth1"
UUID=e1c6038b-e6d7-4f3e-8ec7-c482191a5b00
ONBOOT=yes
LAST_CONNECT=1422351621
修改主机名
[[email protected] network-scripts]# vi /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=rac2
GATEWAY=192.168.2.2
[[email protected] ~]# ping rac2
PING rac2 (192.168.2.189) 56(84) bytes of data.
64 bytes from rac2 (192.168.2.189): icmp_seq=1 ttl=64 time=0.045 ms
64 bytes from rac2 (192.168.2.189): icmp_seq=2 ttl=64 time=0.134 ms
64 bytes from rac2 (192.168.2.189): icmp_seq=3 ttl=64 time=0.045 ms
^C
--- rac2 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2664ms
rtt min/avg/max/mdev = 0.045/0.074/0.134/0.043 ms
[[email protected] ~]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of these two values:
# targeted - Targeted processes are protected,
# mls - Multi Level Security protection.
SELINUXTYPE=targeted
5 vbox虚拟共享存储并使用udev绑定
ASMLIB !=ASM
5.1 UDEV来绑定
Rac1创建 VID格式，固定大小 的虚拟磁盘（6个 5个G），存储--stat
E:\rac1\Disk1.vdi
配置完rac1 后，在设置rac2，添加已经创建好的共享磁盘
虚拟介质管理，修改创建的磁盘为 可共享，重启vbox
Rac2创建磁盘---使用已共享的6个磁盘，确定已共享
分别启动rac1，rac2进行绑定
[[email protected]12crac1 ~]# cd /dev/
[[email protected] dev]# ls -l sd*
brw-rw---- 1 root disk 8, 0 Mar 17 04:12 sda
brw-rw---- 1 root disk 8, 1 Mar 17 04:12 sda1
brw-rw---- 1 root disk 8, 2 Mar 17 04:12 sda2
brw-rw---- 1 root disk 8, 16 Mar 17 04:12 sdb
brw-rw---- 1 root disk 8, 32 Mar 17 04:12 sdc
brw-rw---- 1 root disk 8, 48 Mar 17 04:12 sdd
brw-rw---- 1 root disk 8, 64 Mar 17 04:12 sde
brw-rw---- 1 root disk 8, 80 Mar 17 04:12 sdf
brw-rw---- 1 root disk 8, 96 Mar 17 04:12 sdg
[[email protected]12crac2 ~]# cd /dev/
[[email protected] dev]# ls -l sd*
brw-rw---- 1 root disk 8, 0 Mar 17 04:12 sda
brw-rw---- 1 root disk 8, 1 Mar 17 04:12 sda1
brw-rw---- 1 root disk 8, 2 Mar 17 04:12 sda2
brw-rw---- 1 root disk 8, 16 Mar 17 04:12 sdb
brw-rw---- 1 root disk 8, 32 Mar 17 04:12 sdc
brw-rw---- 1 root disk 8, 48 Mar 17 04:12 sdd
brw-rw---- 1 root disk 8, 64 Mar 17 04:12 sde
brw-rw---- 1 root disk 8, 80 Mar 17 04:12 sdf
brw-rw---- 1 root disk 8, 96 Mar 17 04:12 sdg
2个节点上分别执行
cd /dev
ls -l /dev
在Linux 6上使用UDEV解决RAC ASM存储设备名问题
http://www.askmaclean.com/archives/%E5%9C%A8linux-6%E4%B8%8A%E4%BD%BF%E7%94%A8udev%E8%A7%A3%E5%86%B3rac-asm%E5%AD%98%E5%82%A8%E8%AE%BE%E5%A4%87%E5%90%8D%E9%97%AE%E9%A2%98.html
for i in b c d e f g ;
do
echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules
done
/sbin/start_udev
分别在2个节点上执行
节点1
[[email protected] ~]# cd /dev/
[[email protected] dev]# ls -l sd*
brw-rw---- 1 root disk 8, 0 Jan 28 02:17 sda
brw-rw---- 1 root disk 8, 1 Jan 28 02:17 sda1
brw-rw---- 1 root disk 8, 2 Jan 28 02:17 sda2
brw-rw---- 1 root disk 8, 16 Jan 28 02:17 sdb
brw-rw---- 1 root disk 8, 32 Jan 28 02:17 sdc
brw-rw---- 1 root disk 8, 48 Jan 28 02:17 sdd
brw-rw---- 1 root disk 8, 64 Jan 28 02:17 sde
brw-rw---- 1 root disk 8, 80 Jan 28 02:17 sdf
brw-rw---- 1 root disk 8, 96 Jan 28 02:17 sdg
[[email protected] dev]# cat /etc/udev/rules.d/99-oracle-asmdevices.rules
[[email protected] dev]# echo "options=--whitelisted --replace-whitespace" >> /etc/scsi_id.config
[[email protected] dev]# for i in b c d e f ;
> do
> echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules
> done
[[email protected] dev]# cat /etc/udev/rules.d/99-oracle-asmdevices.rules
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBc4a46c76-e22aed86", NAME="asm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBd0dbffe4-cb516af9", NAME="asm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBe1ddb493-474a8e0e", NAME="asm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBa6b6a83b-f9d00a2a", NAME="asm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB1b8dba16-09341986", NAME="asm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660"
[[email protected] ~]# /sbin/start_udev
Starting udev: [ OK ]
[[email protected] ~]# cd /dev/
[[email protected] dev]# ls -l asm*
brw-rw---- 1 grid asmadmin 8, 16 Jan 28 02:37 asm-diskb
brw-rw---- 1 grid asmadmin 8, 32 Jan 28 02:38 asm-diskc
brw-rw---- 1 grid asmadmin 8, 48 Jan 28 02:38 asm-diskd
brw-rw---- 1 grid asmadmin 8, 64 Jan 28 02:38 asm-diske
brw-rw---- 1 grid asmadmin 8, 80 Jan 28 02:38 asm-diskf
节点2 一样的操作
5.2 手动配置ssh等效性
Oracle用户
[[email protected] grid_11]# /bin/ln -s /usr/bin/ssh /usr/local/bin/ssh
[[email protected] grid_11]# /bin/ln -s /usr/bin/scp /usr/local/bin/scp
[[email protected] grid_11]#
[[email protected] ~]$ mkdir ~/.ssh
[[email protected] ~]$ cd .ssh
[[email protected] .ssh]$ ssh-keygen -t rsa
[[email protected] .ssh]$ ssh-keygen -t dsa
[[email protected] .ssh]$ touch authorized_keys
[[email protected] .ssh]$ ssh rac1 cat /home/oracle/.ssh/id_rsa.pub >> authorized_keys
[[email protected] .ssh]$ ssh rac1 cat /home/oracle/.ssh/id_dsa.pub >> authorized_keys
[[email protected] .ssh]$ ssh rac2 cat /home/oracle/.ssh/id_dsa.pub >> authorized_keys
[email protected]'s password:
cat: /home/oracle/.ssh/id_dsa.pub: No such file or directory
在节点2上执行以上操作
[[email protected] .ssh]$ ssh rac2 cat /home/oracle/.ssh/id_dsa.pub >> authorized_keys
[email protected]'s password: ---成功
[[email protected] .ssh]$ scp authorized_keys rac1:/home/oracle/.ssh/
authorized_keys
[[email protected] .ssh]$ ssh rac1 date
Wed Jan 28 04:40:34 EST 2015
[[email protected] .ssh]$ ssh rac2 date
Wed Jan 28 04:40:46 EST 2015
Grid用户的等效性
[[email protected] ~]$ cd .ssh/
[[email protected] .ssh]$ ssh-keygen -t rsa
[[email protected] .ssh]$ ssh-keygen -t dsa
[[email protected] .ssh]$ touch authorized_keys
[[email protected] .ssh]$ ssh rac1 cat /home/grid/.ssh/id_rsa.pub >> authorized_keys
[[email protected] .ssh]$ ssh rac2 cat /home/grid/.ssh/id_rsa.pub >> authorized_keys
cat: /home/grid/.ssh/id_rsa.pub: No such file or directory
[[email protected] .ssh]$ ssh rac2 cat /home/grid/.ssh/id_rsa.pub >> authorized_keys
[email protected]'s password:
[[email protected] .ssh]$ ssh rac1 cat /home/grid/.ssh/id_dsa.pub >> authorized_keys
[[email protected] .ssh]$ ssh rac2 cat /home/grid/.ssh/id_dsa.pub >> authorized_keys
[[email protected] .ssh]$ scp authorized_keys rac2:/home/grid/.ssh/
authorized_keys
2个节点分别执行
[[email protected] .ssh]$ ssh rac1 date
Wed Jan 28 04:50:39 EST 2015
[[email protected] .ssh]$ ssh rac2 date
Wed Jan 28 04:50:45 EST 2015
2个节点分别执行
[[email protected] .ssh]$ ssh-agent $SHELL
[[email protected] .ssh]$ ssh-add
Identity added: /home/grid/.ssh/id_rsa (/home/grid/.ssh/id_rsa)
Identity added: /home/grid/.ssh/id_dsa (/home/grid/.ssh/id_dsa)
[[email protected] .ssh]$
6 安装11g r2.1.0 gird
解压
[[email protected] software]# unzip linux.x64_11gR2_grid.zip
[[email protected] software]# unzip linux.x64_11gR2_grid.zip -d grid_11
xterm
[[email protected] software]# xterm
-bash: xterm: command not found
[[email protected] software]# yum install xterm
[[email protected] software]# xterm -help
X.Org 6.8.99.903(253) usage:
xterm [-options ...] [-e command args]
/usr/bin/xterm -ls -display $DISPLAY
----------------------11.2.3
[[email protected] g01]# ll
total 956252
-rw-r--r-- 1 root root 979195792 Mar 17 04:27 p10404530_112030_Linux-x86-64_3of7.zip
[[email protected] g01]# unzip p10404530_112030_Linux-x86-64_3of7.zip
[[email protected] g01]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg_12crac1-lv_root
37727768 9239268 26571984 26% /
tmpfs 1544612 88 1544524 1% /dev/shm
/dev/sda1 495844 55656 414588 12% /boot
[[email protected] g01]# cd
[[email protected] ~]# mkdir /media/"OL6.3 x86_64 Disc 1 20120626"
mkdir: cannot create directory `/media/OL6.3 x86_64 Disc 1 20120626': File exists
[[email protected] ~]# mount -t iso9660 /dev/sr0 /media/"OL6.3 x86_64 Disc 1 20120626"
mount: no medium found on /dev/sr0
[[email protected] ~]# cd /media/
[[email protected] media]# ll
total 12
drwxr-xr-x. 2 root root 4096 Mar 17 02:22 cdrom
drwxr-xr-x 12 yhq1314 yhq1314 6144 Jun 26 2012 OL6.3 x86_64 Disc 1 20120626
dr-xr-xr-x 4 yhq1314 yhq1314 2048 Jun 26 2012 Oracle Linux Server
[[email protected] ~]# mount -t iso9660 /dev/sr0 /media/"OL6.3 x86_64 Disc 1 20120626"
mount: block device /dev/sr0 is write-protected, mounting read-only
[[email protected] ~]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/vg_12crac1-lv_root
37727768 9239324 26571928 26% /
tmpfs 1544612 112 1544500 1% /dev/shm
/dev/sda1 495844 55656 414588 12% /boot
/dev/sr0 3589186 3589186 0 100% /media/OL6.3 x86_64 Disc 1 20120626
[[email protected] ~]# yum install xterm
--/usr/bin/xterm -ls -display $DISPLAY
[[email protected] g01]# chown -R grid:oinstall grid_11
选择normal的话，需要3块磁盘
2个节点分别运行
/g01/oraInventory/orainstRoot.sh --节点1运行完在运行2节点
/g01/11.2.0/grid/root.sh --1节点运行完运行2节点
[[email protected] ~]# su - grid
[[email protected] ~]$ crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
[[email protected] ~]$ crs_stat -t -v
Name Type R/RA F/FT Target State Host
----------------------------------------------------------------------
ora....ER.lsnr ora....er.type 0/5 0/ ONLINE ONLINE rac1
ora....N1.lsnr ora....er.type 0/5 0/0 ONLINE ONLINE rac1
ora.OCR.dg ora....up.type 0/5 0/ ONLINE ONLINE rac1
ora.asm ora.asm.type 0/5 0/ ONLINE ONLINE rac1
ora.cvu ora.cvu.type 0/5 0/0 ONLINE ONLINE rac1
ora.gsd ora.gsd.type 0/5 0/ OFFLINE OFFLINE
ora....network ora....rk.type 0/5 0/ ONLINE ONLINE rac1
ora.oc4j ora.oc4j.type 0/1 0/2 ONLINE ONLINE rac1
ora.ons ora.ons.type 0/3 0/ ONLINE ONLINE rac1
ora....SM1.asm application 0/5 0/0 ONLINE ONLINE rac1
ora....C1.lsnr application 0/5 0/0 ONLINE ONLINE rac1
ora.rac1.gsd application 0/5 0/0 OFFLINE OFFLINE
ora.rac1.ons application 0/3 0/0 ONLINE ONLINE rac1
ora.rac1.vip ora....t1.type 0/0 0/0 ONLINE ONLINE rac1
ora....SM2.asm application 0/5 0/0 ONLINE ONLINE rac2
ora....C2.lsnr application 0/5 0/0 ONLINE ONLINE rac2
ora.rac2.gsd application 0/5 0/0 OFFLINE OFFLINE
ora.rac2.ons application 0/3 0/0 ONLINE ONLINE rac2
ora.rac2.vip ora....t1.type 0/0 0/0 ONLINE ONLINE rac2
ora.scan1.vip ora....ip.type 0/0 0/0 ONLINE ONLINE rac1
[[email protected] ~]$ olsnodes -n #.查看集群中节点配置信息
rac1 1
rac2 2
[[email protected] ~]$ olsnodes -n -i -s -t
rac1 1 rac1vip Active Unpinned
rac2 2 rac2vip Active Unpinned
[[email protected] ~]$ ps -ef|grep lsnr|grep -v 'grep'|grep -v 'ocfs'|awk '{print$9}'
LISTENER_SCAN1
LISTENER
[[email protected] ~]$ srvctl status asm -a
ASM is running on rac2,rac1
ASM is enabled.
7 asmca
只在节点rac1执行即可
进入grid用户下
[[email protected] ~]# su - grid
利用asmca
[[email protected] ~]$ asmca
这里看到安装grid时配置的OCR盘已存在
添加DATA盘，点击create，使用裸盘/dev/asm-diske,diskf
创建FRA
8安装db
节点1
[[email protected] ~]$ vi .bash_profile
[[email protected] ~]$ cat .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export GRID_HOME=/g01/11.2.0/grid
export ORACLE_HOME=/g01/11.2.0/grid
export PATH=$GRID_HOME/bin:$GRID_HOME/OPatch:/sbin:/bin:/usr/sbin:/usr/bin
export ORACLE_SID=+ASM1
export LD_LIBRARY_PATH=$GRID_HOME/lib:$GRID_HOME/lib32
export ORACLE_BASE=/g01/orabase
export ORA_NLS10=$ORACLE_HOME/nls/data
export NLS__China.AL32UTF8
节点2一样
配置root环境变量
[[email protected] ~]# vi .bash_profile
[[email protected] ~]# cat .bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export GRID_HOME=/g01/11.2.0/grid
export ORACLE_HOME=/g01/11.2.0/grid
export PATH=$GRID_HOME/bin:$GRID_HOME/OPatch:/sbin:/bin:/usr/sbin:/usr/bin
9 安装oracle数据库
[[email protected] s01]# ll
total 2442056
drwxr-xr-x 8 oracle oinstall 4096 Sep 22 2011 database
-rw-r--r--. 1 root root 1358454646 Jan 28 2015 p10404530_112030_Linux-x86-64_1of7.zip
-rw-r--r--. 1 root root 1142195302 Jan 29 2015 p10404530_112030_Linux-x86-64_2of7.zip
[[email protected] ~]$ logout
[[email protected] s01]# su - grid
[[email protected] ~]$ crs_stat |grep vip
NAME=ora.12crac1.vip
TYPE=ora.cluster_vip_net1.type
NAME=ora.12crac2.vip
TYPE=ora.cluster_vip_net1.type
NAME=ora.scan1.vip
TYPE=ora.scan_vip.type
[[email protected] ~]$ crsctl stat res ora.12crac1.vip
NAME=ora.12crac1.vip
TYPE=ora.cluster_vip_net1.type
TARGET=ONLINE
STATE=ONLINE on 12crac1
[[email protected] ~]$ crsctl stat res ora.12crac1.vip -p
NAME=ora.12crac1.vip
TYPE=ora.cluster_vip_net1.type
ACL=owner:root:rwx,pgrp:root:r-x,other::r--,group:oinstall:r-x,user:grid:r-x
ACTION_FAILURE_TEMPLATE=
ACTION_SCRIPT=
ACTIVE_PLACEMENT=1
AGENT_FILENAME=%CRS_HOME%/bin/orarootagent%CRS_EXE_SUFFIX%
AUTO_START=restore
CARDINALITY=1
CHECK_INTERVAL=1
CHECK_TIMEOUT=30
DEFAULT_TEMPLATE=PROPERTY(RESOURCE_CLASS=vip)
DEGREE=1
DESCRIPTION=Oracle VIP resource
ENABLED=1
FAILOVER_DELAY=0
FAILURE_INTERVAL=0
FAILURE_THRESHOLD=0
GEN_USR_ORA_STATIC_VIP=
GEN_USR_ORA_VIP=
HOSTING_MEMBERS=12crac1
LOAD=1
LOGGING_LEVEL=1
NLS_LANG=
NOT_RESTARTING_TEMPLATE=
OFFLINE_CHECK_INTERVAL=0
PLACEMENT=favored
PROFILE_CHANGE_TEMPLATE=
RESTART_ATTEMPTS=0
SCRIPT_TIMEOUT=60
SERVER_POOLS=*
START_DEPENDENCIES=hard(ora.net1.network) pullup(ora.net1.network)
START_TIMEOUT=0
STATE_CHANGE_TEMPLATE=
STOP_DEPENDENCIES=hard(ora.net1.network)
STOP_TIMEOUT=0
TYPE_VERSION=2.1
UPTIME_THRESHOLD=1h
USR_ORA_ENV=
USR_ORA_VIP=12crac1-vip
VERSION=11.2.0.3.0
[[email protected] ~]$ crsctl stat res ora.net1.network
NAME=ora.net1.network
TYPE=ora.network.type
TARGET=ONLINE , ONLINE
STATE=ONLINE on 12crac1, ONLINE on 12crac2
9 DBCA
dbca
[[email protected] ~]# su - oracle
[[email protected] ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.4.0 - Production on 30-OCT-2018 08:04:27
Copyright (c) 1991, 2013, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production
Start Date 30-OCT-2018 03:23:38
Uptime 0 days 4 hr. 40 min. 50 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/rac1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.15.7.11)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.15.7.13)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "bol" has 1 instance(s).
Instance "bol1", status READY, has 1 handler(s) for this service...
Service "bolXDB" has 1 instance(s).
Instance "bol1", status READY, has 1 handler(s) for this service...
The command completed successfully
[[email protected] ~]$ crs_stat -t
名称 类型 目标 状态 主机
------------------------------------------------------------
ora....SM1.asm application ONLINE ONLINE 12crac1
ora....C1.lsnr application ONLINE ONLINE 12crac1
ora....ac1.gsd application OFFLINE OFFLINE
ora....ac1.ons application ONLINE ONLINE 12crac1
ora....ac1.vip ora....t1.type ONLINE ONLINE 12crac1
ora....SM2.asm application ONLINE ONLINE 12crac2
ora....C2.lsnr application ONLINE ONLINE 12crac2
ora....ac2.gsd application OFFLINE OFFLINE
ora....ac2.ons application ONLINE ONLINE 12crac2
ora....ac2.vip ora....t1.type ONLINE ONLINE 12crac2
ora.DATADG.dg ora....up.type ONLINE ONLINE 12crac1
ora...._P.lsnr ora....er.type ONLINE ONLINE 12crac1
ora....N1.lsnr ora....er.type ONLINE ONLINE 12crac1
ora....EMDG.dg ora....up.type ONLINE ONLINE 12crac1
ora.asm ora.asm.type ONLINE ONLINE 12crac1
ora.cvu ora.cvu.type ONLINE ONLINE 12crac1
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE 12crac1
ora.oc4j ora.oc4j.type ONLINE ONLINE 12crac1
ora.ons ora.ons.type ONLINE ONLINE 12crac1
ora.scan1.vip ora....ip.type ONLINE ONLINE 12crac1
[[email protected] ~]$ srvctl status listener
Listener LISTENER_P is enabled
Listener LISTENER_P is running on node(s): 12crac2,12crac1
[[email protected] ~]$ olsnodes
12crac1
12crac2
[[email protected] ~]$ srvctl status listener
Listener LISTENER_P is enabled
Listener LISTENER_P is running on node(s): 12crac2,12crac1
[[email protected] ~]$ srvctl config scan
SCAN name: vmac-cluster-scan, Network: 1/192.168.2.0/255.255.255.0/eth0
SCAN VIP name: scan1, IP: /vmac-cluster-scan/192.168.2.194
[[email protected] ~]$ srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
[[email protected] ~]$ echo $ORACLE_SID
PROD1
[[email protected] ~]$ cd /s01/orabase/cfgtoollogs/dbca/PROD/
[[email protected] PROD]$ ls
CreateDBCatalog.log CreateDBFiles.log CreateDB.log trace.log
[[email protected] PROD]$ ls -ltr
total 472
-rw-r----- 1 oracle oinstall 291 Mar 18 02:01 CreateDB.log
-rw-r----- 1 oracle oinstall 0 Mar 18 02:01 CreateDBFiles.log
-rw-r----- 1 oracle oinstall 463733 Mar 18 02:01 trace.log
-rw-r----- 1 oracle oinstall 9415 Mar 18 02:02 CreateDBCatalog.log
[[email protected] PROD]$ tail -f trace.log
[[email protected] PROD]$ tail -f CreateDBCatalog.log
转载于:https://www.cnblogs.com/yhq1314/p/9921925.html