With the quick wash function, there are so many disadvantages!
In the hot summer months, light clothing becomes our first choice. These clothes are often not too dirty, so the "quick wash" function of the washing machine is particularly useful.
However, it wasn't until recently that the washing machine at home broke down and an experienced after-sales master alerted me that I realized that I had been misusing this function.
No wonder the clothes are not washed clean enough, and the washing machine is prone to breakage!
1. The principle behind "quick washing".
The standard washing machine routine usually takes more than 45 minutes, but the "quick wash" can be completed in just a dozen minutes.
So, how does "Quick Wash" do it? In fact, the "Quick Wash Function" shortens the washing time in three main ways:
- 1. Speed up the process of adding water and draining water by reducing the amount of washing water.
- 2. Reduce the number of rinses, usually only one rinse (compared to three times in standard mode).
- 3. Increase the speed of the motor to enhance the efficiency of cleaning.
After understanding these principles, it is not difficult to find out why the clothes may not be washed in the "quick wash" mode.
Reduced water volume may result in clothes not being fully soaked with water, insufficient rinsing times may leave detergent foam on the clothes, and excessive motor speed may exacerbate wear and tear.
2. How to use the "Quick Wash" function correctly
The biggest highlight of the "Quick Wash" function is its high efficiency.
However, in order to balance its advantages and disadvantages, we need to use it sparingly. According to the advice of after-sales workers, we should avoid relying too much on this feature.
In fact, "Quick Wash" is more suitable for: cleaning clothes that are not too dirty and resistant to wear and tear, such as socks and jeans.
For delicate or delicate clothing, even if it is slightly dirty, it is not recommended to use "quick wash".
When using the "Quick Wash", you should also pay attention to the following:
- Key point (1): The weight of the laundry should be controlled within half of the carrying weight of the washing machine.
For example, if the washing machine is marked with a load weight of 10 kg, the weight of the laundry should not exceed 5 kg in the "Quick Wash" mode.
- Key point (2): Use the quick wash function to reduce the detergent content.
Due to the low amount of water in Quick Wash mode and the limited number of rinses, the amount of detergent used should be reduced or a detergent with low foaming should be chosen to avoid detergent residue.
- Key point (3): The quick wash function will cause excessive wear and tear on the motor and clothes.
Considering that the high-power operation of the motor in the "Quick Wash" mode accelerates the wear and tear of the washing machine, it is not recommended to use the "Quick Wash" function for a long or continuous period in order to prolong the service life of the washing machine.
3. Other common misunderstandings about the use of washing machines
In addition to the misconceptions about the "quick wash" function, many users also have other misconceptions when using washing machines. Here are some notable points:
- (1) To wash wet clothes, the water level should be appropriately reduced
When putting in wet laundry, the appropriate water level should be selected manually.
Because the washing machine usually automatically matches the water level according to the weight of the laundry, and the weight of wet laundry will increase, but the water absorption will decrease, which may cause the washing machine to choose too high a water level, which will not only waste water but also affect the washing effect.
- (2) When the washing machine is running, it is best not to add clothes halfway
Some users are accustomed to adding laundry during the operation of the washing machine, which will not only affect the accurate matching of the water level, but also may lead to the destruction of the balance inside the washing machine, which in turn will affect the washing effect and the life of the washing machine.
For washing machines without the "open lid and self-stop" function, this behavior may even cause harm to the user.
- (3) Although the "power wash" function is good, it is the most serious wear and tear on clothes
The "Power Wash" mode, while the washing effect is excellent, is also the most abrasive to the garment. Therefore, this mode is not recommended unless the clothing is particularly dirty and resistant to abrasion, such as workwear, etc.
The "heat wash" mode also works well, but is usually only available in front-loading washing machines.
- (4) Wash clothes in strict accordance with the clothing label
Although the washing machine offers a variety of gentle washing modes, such as "wool wash", "silk wash" and "down wash", users should still choose carefully.
Laundry labels that clearly state that they are not machine washable are best taken to a dry cleaner for professional cleaning to avoid damage and ensure results.
Summary:
While "quick wash" is convenient and efficient, it is not suitable for all clothes and occasions. Proper use is the key to balancing washing efficiency and clothing protection.
Most people use the washing machine incorrectly, so I suggest you can forward and share!