According to the weather forecast
From daytime to night on the 29th, it was cloudy with thunderstorms or showers turning clear, with a maximum temperature of 31 °C, a minimum temperature of 24 °C, a northeast wind of 2~3, and a gust of 7~9 during thunderstorms in thunderstorm areas.
↓↓↓
Safety guidelines for traveling during the rainy season and flood season
Civilized traffic, you and I pass
Prepare for your trip
1. Pay attention to the weather
Pay close attention to weather conditions such as rainfall before traveling, try to avoid waterlogged depressions, culverts, underneath overpasses and other road sections, keep abreast of the depth of water accumulation and road congestion in each road section, and make a reasonable travel plan. 2. Check the condition of the vehicle
If you need to travel during the flood season, you need to carefully inspect the wipers, lights, tires, seals, etc. in advance. The wiper can sweep away the water droplets on the windshield in time to ensure visibility; Lighting is especially important in rainy days, which can play a role in identification and warning; If the window seal is aging or the drain groove is blocked, it should be dealt with in time to prevent water seepage from the window. In addition, when traveling during the flood season, you should avoid using tires with high wear to avoid accidents due to less friction with the ground.
Fuel vehicle driving guide
1. Control the driving speed
On rainy days, the road is slippery, and the speed is too fast, which will form a water film between the tires and the ground, resulting in a "hydroplan" phenomenon. Therefore, the driving speed should be reduced when driving in rainy weather.
2. Keep a safe distance
The safe distance for driving in rainy weather is more than 3 times the safe distance under normal conditions. Pay attention to keep a lateral distance from the left and right vehicles, and increase the distance between other vehicles and the edge of the road when overtaking or meeting in the rain.
3. Reasonable use of lighting
In rainy days, visibility is reduced, and wide indicator lights, fog lights, low beams and tail lights should be used reasonably when driving. Generally speaking, when it rains, the sky is not particularly overcast, and the visibility is okay. Turn on the headlights or front fog lights when it rains heavily; When it rains very heavily, you can turn on your fog lights and tail lights.
4. Wading in the water
Observe the depth of stagnant water and encounter a waterlogged road section: be sure to observe first and then pass cautiously. Generally speaking, when the height of the water is less than half of the tire, you can pass, or you can observe whether other vehicles are wading in the water and see if there are deep potholes or obstacles on the ground. When passing, you should drive in low gear, drive slowly at a constant speed, stabilize the throttle, and do not stop, change gears or turn sharply in the middle of the road. If the height of the water exceeds the center line of the tire, you should choose another route to detour and do not force it through.
Turn on the wipers and enter the water slowly: When a vehicle wades through water, a large splash of water may cover the front windshield, so the vehicle needs to turn on the windshield when wading. The slow entry is to know the real situation of the waterlogged road surface in time and to avoid splashing too much.
Steady throttle and slow passage in low gear: Try not to overtake on waterlogged roads and do not get too close to the car in front. In particular, if the vehicle in front is a large vehicle, the splash caused by entering the waterlogged road section is easy to splash on the windshield of the vehicle behind and affect the vision, resulting in instantaneous "zero visibility".
Do not restart after turning off the ignition: If the vehicle accidentally turns off during wading, do not re-ignite and start. This is because restarting the vehicle can expose the cylinders that have already been flooded with water to the impact of compressed water, which can cause serious damage to the engine. At this time, you should wait for rescue in place or contact the repair shop or 4S shop professionals to deal with it, and remember not to operate blindly
5. Keep calm and drive to places prone to natural disasters such as landslides, landslides, and rockfalls: when a landslide occurs, you should first be calm and calm, and at the same time quickly evacuate to both sides of the landslide body to avoid evacuation along the sliding direction of the landslide body. When a landslide occurs, there is still a risk that a large-scale landslide will continue to occur, so do not immediately enter the disaster area to excavate and search for property to avoid secondary accidents. At the same time, they should obey the command of the traffic police and evacuate the scene in time according to the guidance. New energy vehicle driving guide 1, control the driving speed
On rainy days, the road is slippery, and the speed is too fast, which will form a water film between the tires and the ground, resulting in a "hydroplan" phenomenon. Therefore, the driving speed should be reduced when driving in rainy weather.
2. Keep a safe distance
The safe distance for driving in rainy weather is more than 3 times the safe distance under normal conditions. Pay attention to keep a lateral distance from the left and right vehicles, and increase the distance between other vehicles and the edge of the road when overtaking or meeting in the rain.
3. Reasonable use of lighting
In rainy days, visibility is reduced, and wide indicator lights, fog lights, low beams and tail lights should be used reasonably when driving. Generally speaking, when it rains, the sky is not particularly overcast, and the visibility is okay. Turn on the headlights or front fog lights when it rains heavily; When it rains very heavily, you can turn on your fog lights and tail lights.
Fourth, the depth of wading can not exceed the chassis: when the new energy vehicle passes through the waterlogged road, it is necessary to try to ensure that the depth of wading cannot exceed the chassis. Although the three-electric system of new energy vehicles adopts a completely enclosed design, the battery soaked in water for a long time will bring greater safety risks. If the owner of the car cannot judge the depth of the stagnant water, he would rather wait than wade through the water.
Maintain vehicle speed and pass slowly: In the process of wading in the water, new energy vehicles should pay attention to maintaining vehicle speed and pass slowly as much as possible; Avoid bumping the chassis to damage the waterproof layer of the vehicle chassis, or even damaging the chassis or battery pack box, causing the chassis to rust.
Timely inspection after wading: After wading, in addition to the same as traditional cars, remove the stored water, check the chassis, especially the braking system, and pay attention to the inspection of the power battery, motor and power wiring harness.
5. Precautions for wading and anchoringIf the new energy vehicle is found to be breaking down in the process of wading, it should be attached great importance to it and strictly follow the following requirements:
Do not restart: Do not attempt to restart the vehicle on your own, and call a professional to come and deal with it. The maintenance personnel will measure the temperature of various lines, batteries and voltages according to the infrared temperature measuring gun, record the temperature measurement, and avoid internal short circuit and explosion.
Exit the vehicle: The occupants of the vehicle quickly leave the vehicle. After notifying the maintenance company and personnel, the owner quickly leaves the vehicle and moves to a high-lying and safe place to prevent the vehicle and personnel from being trapped.
Rainfall is frequent during the flood season
The sudden weather has increased, and the Chengwu County Rong Media Center warmly reminds you to strengthen your precautions and pay attention to travel safety
Source: Heze Traffic Police
(Edited by Zuo Haiyan and reviewed by Gao Wenqing)